Here is a new one.....and I have done a little research on this but have no conclusion.

In the past I have installed VNC on my linux machine for remote desktop into my computer. After rebuilding this machine to LL 2.2 I decided to try Teamviewer 10 as a remote desktop app....since I have been using it for connecting to other systems for a couple years. It is much simpler to install and configure. However, it appears I cannot access the system from the outside when the screen is locked. When I first installed TV 10, I had no trouble accessing it during some testing, but the screen was never locked at that time. The last two times I have tried connecting remotely it has gone through the process of "initiating display parameters" but fails to actually connect. I can only assume this is due to the screen being locked locally.

Sooooo....what is the solution to getting this working correctly? And if there is no solution, is there a simplified method to get vnc running on LL 2.2.....as installing vnc seems to keep changing each time I have to rebuild, and I have to figure out how to get it to work again.

Thanks.

Is it possible with Linux Lite? Whenever I try and enable encryption the installer basically refuses to do so.

skar

Here is my wallpaper.

I am looking to make a wall paper but what fonts are used I am making a WBGS and Linux Lite custom wallpaper.

Any way to install the latest AMD Drivers i am just wondering the omega ones and if so will they get good performance like ti is now if not I wont bother.

Hi, I am new to Linux Lite. Just installed it on an Intel NUC platform using the embedded MMC 4 gig "drive". All that is installed apart from the default is Opencpn, which is a navigation program. I have removed the office apps and now only have about 60 meg free. I am looking for information as to which files /apps / utilities I could remove to give me some space? I would like to install Chrome and remove Firefox as I use Chrome everywhere else and the way it syncs your everything is what I want. Is Chrome bigger than Firefox after installation?

I'm posting on Video Cards thinking the problem lies there, however I'm not sure. I'm salvaging a relatively old desktop (back when Vista was around) for friends of mine. The installation went fine but I'm encountering intermittent screen freezes, which produce lines across the screen. It seems to occur especially when I'm browsing. I have to switch off the hard drive and then try again. Most times, it reboots OK but a few minutes later, the same problem occurs. I changed the D-SUB connection over and there was some improvement. I was thinking this may have solved the problem, but I had another freeze whilst in Thunderbird.
I've attached the System Report - hope someone can help.

Thanks
pauloz



[attachment deleted by admin, expired]

I am hoping to be able to use Linuxlite to watch online streaming episodes from HBOGO.  Any attempt to view a video returns nothing (but an empty screen) from both Firefox and Chrome.  Searching around a bit it appears that Pipelight may be a solution that allows the streaming content inside the adobe flash viewer (which is the latest version) inside the Chrome browser.  I'm a bit confused as to whether the newest version of Pipelight requires the full Wine installation which I would prefer not to do.

Does anyone have HBOGO working?  How was this achieved?  Thanks.

  Desktop already running LL2.0 32 bit.

As unable to create a usable dvd from  LL2.2-32.iso ( always hangs) . Have tried downloading iso  several times.
 
Trying to LL2.2-32 bootable usb from iso
a) iso downloaded Fresh -
b) SanDisk Cruise Gparted to FAT 32 + boot flagged.  Single partition.
c) Unetbootin-linux-608 downloaded from their site and made executable
Following instructions as per http://unetbootin.sourceforge.net/#install
d) SanDisk Mounted
e) Unetbootin double clicked – root password added and unetbootin screen appears
f) Tick Disc Image to downloaded  LL iso  in this case /home/linuxlite/Downloads/linux-lite-2.2-32bit.iso
g) Scandisk on /dev/sdb1
h) Space used to preserve set a zer
i) press OK and process starts
j)  Extracting =  at 9 of 21 files  (42%)  there is a long pause
casper/filesystemsquash.fs (706MB)
k) Complete and asks to reboot
j) Reboots and blue Unetbootin options screen appears

Options  = default, Start linux lite, start linux lite safe mode

k) use default – system reboots and stalls stating can not read a loop?


Reading Sandisk files are as per screen shot - how do I load a screen shot?  Read the forum stupid me!!




REPEAT above using TAHR puppy linux iso. On same PC and same version Unetbootin – Sandisk freshly format with gparted to FAT 32 to clear .

Proceeds smoothly, with no unetbootin dialogue on rebooting. Ran OK on rebooting.


So the question is What is going on?  is it the download of the  LL2.2-32bit.iso – Have downloaded it several times freshly and each time problems.  Have not done a checksum  however. But having downloaded at different times have assumed ( ?)  that download is OK.


Any ideas welcomed. 

UPDATE- Have just managed to burn dvd from this iso on my HDD - Third try.  However  the unetbootin route ( as above) still the same problem. So it would appear not to be the iso downloaded??

I am wondering how to install OBS-Studio I would like to broadcast but cant get it installed.

The following packages have unmet dependencies:
obs-studio : Depends: libavcodec-ffmpeg56 (>= 7:2.4) but it is not installable
              Depends: libavformat-ffmpeg56 (>= 7:2.4) but it is not installable
              Depends: libavutil-ffmpeg54 (>= 7:2.4) but it is not installable
              Depends: libswresample-ffmpeg1 (>= 7:2.4) but it is not installable
              Depends: libswscale-ffmpeg3 (>= 7:2.4) but it is not installable
E: Unable to correct problems, you have held broken packages.