===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into the Software - Support - Updates section for assistance.

============ Log ===========

Hit:1 http://archive.ubuntu.com/ubuntu jammy InRelease
Hit:2 https://dl.winehq.org/wine-builds/ubuntu focal InRelease
Hit:3 https://brave-browser-apt-release.s3.brave.com stable InRelease
Hit:4 https://deb.opera.com/opera-stable stable InRelease
Get:5 http://linuxcnc.org precise InRelease [60.1 kB]
Err:5 http://linuxcnc.org precise InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3CB9FD148F374FEF
Get:6 http://linuxcnc.org buster InRelease [54.9 kB]
Err:6 http://linuxcnc.org buster InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3CB9FD148F374FEF
Reading package lists...
W: GPG error: http://linuxcnc.org precise InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3CB9FD148F374FEF
E: The repository 'http://linuxcnc.org precise InRelease' is not signed.
W: GPG error: http://linuxcnc.org buster InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 3CB9FD148F374FEF
E: The repository 'http://linuxcnc.org buster InRelease' is not signed.

Hello Admin,
I have installed LL6.6 on a brand new system with Intel i5 3rd gen, 16 GB RAM and 500 GB SSD.
I have added an already partitioned NTFS disk and I tried to mount with Disks GUI app with the following parameters: rw nosuid,nodev,nofail,x-gvfs-show,uid=username,gid=username
However, even it shows in Thunbar that permissions are read-write for the username and username group, yet I can access it read-only.
Failed any trial of saving a text file in that partition, even the ls -l command shows that I have all rights.
Any idea of fixing it?

===========================
Install Updates Error log
===========================
Install Updates could not successfully download and install available updates.
Go to https://www.linuxliteos.com/forums/ and paste the log below into the Software - Support - Updates section for assistance.

============ Log ===========

E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.

Hi when i try to update i get this

===========================
Install Updates Error log
===========================
Install Updates could not successfully download and install available updates.
Go to https://www.linuxliteos.com/forums/ and paste the log below into the Software - Support - Updates section for assistance.

============ Log ===========

E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.

can you please help?
Thanks

Will the procedure listed here work on my 4.8 release?

https://brave.com/linux/

Does anyone know what the Linux Litre 6.8 Base OS and kernel will be?  Also, when will it be released?

thanks!

Please can you advise? I have pc with 3 hard disks (C, D, E). Currently it is setup with Windows 10 on C drive, program installs on D drive and storage etc on E drive. I want to migrate over to Linux Lite (esp. when Win 10 support ends) but keep a Windows system (disconnected from internet). My thinking is C drive for LL and drive D just for Windows programs which are older and not supported by CrossOver or WINE. (Have already checked compatibility). And keep E drive for storing files/folders etc. Is it possible to boot LL as usual but have a separate access to Windows just for running old Windows programs and nothing else? Sorry this is a long winded question but wanted to try and include all deets.

Can the CrossOver Linux be installed on LL? And if so, is it any good? I've tried WINE, but it doesn't support the software I want to run. Many tnx.

I'm a noob and just started my old Linux computer for the second time today. My sister was in the hospital for over 4 months and I had to stop what I was doing after she went in.  She has also been in the nursing home for about 1 month now. I don't remember what all I tried to do with it. I'd like to get it connected to the internet. I have a cable from my motherboard to my modem I guess is what you call it and I'm not able to figure out how to get connected to the internet. The modem is an Motorola MT7711 if that helps. I don't know what version of Linux Lite I'm using though because I forgot to write it down. If it's going to be very difficult, maybe I'll take the desktop somewhere and have someone look at it. I'm 70 years old and not that good with computers.

I can RDP from my Lite Linux machine  into a Windows 10 on my local network with no issues , but when I try using a VPN (which appears stable) and my mobile phone as a hotspot I get a 'Remmina lost connection to RDP ' error.

I would appreciate any help.

Thanks

Winston

This window can help you find connection problems.
You can stop and start the logging at any moment using the On/Off switch.
The stats button (Ctrl+T), can be useful to gather system info you may share when reporting a bug.
There is more info about debugging Remmina on https://gitlab.com/Remmina/Remmina/-/wik...-debugging
(DEBUG) - (rcw_map_event) - Mapping: RemminaConnectionWindow
(DEBUG) - (remmina_protocol_widget_map_event) - Calling plugin mapping function
(DEBUG) - (remmina_protocol_widget_open_connection_real) - Opening connection
(DEBUG) - (remmina_rdp_event_init) - Disable smooth scrolling is set to 0
(DEBUG) - (remmina_rdp_event_init) - Adding GDK_SMOOTH_SCROLL_MASK
(DEBUG) - (remmina_protocol_widget_open_connection_real) - Have SSH
(DEBUG) - (remmina_rdp_main) - RDP data path is /home/derith/.local/share/remmina/RDP
(DEBUG) - (remmina_rdp_main) - Not using system proxy settings
(DEBUG) - (remmina_rdp_tunnel_init) - Tunnel init
(DEBUG) - (remmina_protocol_widget_start_direct_tunnel) - SSH tunnel initialization…
(DEBUG) - (remmina_rdp_event_on_focus_in) - Top level name is: RemminaConnectionWindow
(DEBUG) - (remmina_protocol_widget_start_direct_tunnel) - Calling remmina_public_get_server_port
(DEBUG) - (remmina_protocol_widget_start_direct_tunnel) - Calling remmina_public_get_server_port (tunnel)
(DEBUG) - (remmina_protocol_widget_start_direct_tunnel) - server: 192.168.0.233, port: 3389
(DEBUG) - (remmina_rdp_tunnel_init) - protocol_plugin_start_direct_tunnel() returned [192.168.0.233]:3389
(DEBUG) - (remmina_rdp_tunnel_init) - Tunnel has been optionally initialized. Now connecting to 192.168.0.233:3389
(DEBUG) - (remmina_rdp_main) - gfx_h264_available: 0
(DEBUG) - (remmina_rdp_main) - Resolution set by the user: 1240x708
(DEBUG) - (remmina_rdp_main) - Resolution set after workarounds: 1240x708
(DEBUG) - (remmina_rdp_main) - proxy_type: (null)
(DEBUG) - (remmina_rdp_main) - proxy_username: (null)
(DEBUG) - (remmina_rdp_main) - proxy_password: (null)
(DEBUG) - (remmina_rdp_main) - proxy_hostname: (null)
(DEBUG) - (remmina_rdp_main) - proxy_port: 80
(DEBUG) - (remmina_rdp_main) - Network settings not set
(DEBUG) - (remmina_rdp_main) - rdp_keyboard_remapping_list:
(DEBUG) - (remmina_rdp_main) - Log level set to to INFO
(DEBUG) - (rco_on_disconnect) - Disconnect signal received on RemminaProtocolWidget
(DEBUG) - (remmina_file_save) - Saving profile
(DEBUG) - (remmina_file_save) - We have a secret and disablepasswordstoring=0
(DEBUG) - (remmina_plugin_glibsecret_store_password) - Password “password” saved for file /home/derith/.local/share/remmina/group_rdp_de's-desktop_192-168-0-233.remmina

(DEBUG) - (remmina_file_save) - We have a secret and disablepasswordstoring=0
(DEBUG) - (remmina_plugin_glibsecret_delete_password) - password “ssh_tunnel_password” deleted for file /home/derith/.local/share/remmina/group_rdp_de's-desktop_192-168-0-233.remmina
(DEBUG) - (remmina_file_save) - We have a secret and disablepasswordstoring=0
(DEBUG) - (remmina_plugin_glibsecret_delete_password) - password “gateway_password” deleted for file /home/derith/.local/share/remmina/group_rdp_de's-desktop_192-168-0-233.remmina
(DEBUG) - (remmina_file_save) - We have a secret and disablepasswordstoring=0
(DEBUG) - (remmina_plugin_glibsecret_delete_password) - password “ssh_tunnel_passphrase” deleted for file /home/derith/.local/share/remmina/group_rdp_de's-desktop_192-168-0-233.remmina
(DEBUG) - (remmina_file_save) - Profile saved
(DEBUG) - (remmina_file_save) - Connection profile states saved
(DEBUG) - (remmina_network_monitor_status) - G_NETWORK_CONNECTIVITY_FULL
(DEBUG) - (rco_on_disconnect) - Could not disconnect