============ Log ===========

Ign:1 cdrom://Linux Lite 6.6 - Release amd64 dists/ InRelease
Ign:2 cdrom://Linux 22.04 - Release amd64 dists/ InRelease
Err:3 cdrom://Linux Lite 6.6 - Release amd64 dists/ Release
  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Err:4 cdrom://Linux 22.04 - Release amd64 dists/ Release
  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Hit:5 http://repo.linuxliteos.com/linuxlite fluorite InRelease
Hit:6 http://archive.ubuntu.com/ubuntu jammy InRelease
Hit:7 http://archive.canonical.com/ubuntu jammy InRelease
Hit:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease
Get:9 http://archive.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Get:10 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [119 kB]
Reading package lists...
E: The repository 'cdrom://Linux Lite 6.6 - Release amd64 dists/ Release' does not have a Release file.
E: The repository 'cdrom://Linux 22.04 - Release amd64 dists/ Release' does not have a Release file.

Hello, i used to play Counter Strike 2 on Steam through my Linux Lite Distro about 6 years ago. I decided to play a few days ago.

But when i try to load the game i get this error Failed to initialze Vulkan. Please make sure your driver and GPU support Vulkan.

Does anyone know how i can fix this problem, do i need to buy a graphics card ? Any help would be appreciated.

Derek.

So did a fresh install on my old ideapad and am getting errors with the graphics. Here are the update errors I get

===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into the Software - Support - Updates section for assistance.

============ Log ===========

Ign:1 cdrom://Linux Lite 6.6 - Release amd64 dists/ InRelease
Ign:2 cdrom://Linux 22.04 - Release amd64 dists/ InRelease
Err:3 cdrom://Linux Lite 6.6 - Release amd64 dists/ Release
  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Err:4 cdrom://Linux 22.04 - Release amd64 dists/ Release
  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Hit:5 http://repo.linuxliteos.com/linuxlite fluorite InRelease
Hit:6 http://archive.ubuntu.com/ubuntu jammy InRelease
Hit:7 http://archive.canonical.com/ubuntu jammy InRelease
Hit:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease
Hit:9 http://archive.ubuntu.com/ubuntu jammy-security InRelease
Hit:10 http://archive.ubuntu.com/ubuntu jammy-updates InRelease
Reading package lists...
E: The repository 'cdrom://Linux Lite 6.6 - Release amd64 dists/ Release' does not have a Release file.
E: The repository 'cdrom://Linux 22.04 - Release amd64 dists/ Release' does not have a Release file.

I've been getting errors while attempting to update for the last couple months. Here's the log from my latest attempt below. Anyone know how to fix? Thank you!

Lately, my screensaver has started coming on while I'm watching fullscreen videos in Firefox. This happens when I'm watching Netflix or YouTube.

This is unusual; In the past, if I made a video fullscreen, the screensaver would not come on. But now the screensaver comes on every 15 min or so.

Has anyone else encountered this issue? Know how to fix?

Thank you.

Can't switch to Arabic on Screen keyboard

Thank you

I'm seeing two somewhat different weird behaviours with the Network Manager applet in Lite 6.x:

1. In a VirtualBox VM currently running 6.6: the NM applet reports no connection on login even though the network is connected and working.  The only way I've found to wake the NM applet up is to use

• to activate the connection.  The VM was installed as 6.2 and then upgraded directly to 6.6 but the issue was visible in 6.2 before the upgrade.[/li]
  
• On a Lenovo Ideapad 100S (-11IBY) currently running 6.6:  This laptop doesn't have a builtin ethernet interface so I normally connect via a USB ethernet or 4G dongle - if the USB dongle is present during boot the NM applet displays and correctly shows the connection state; if the dongle is plugged in after boot the NM applet won't display at all.  This one I think is at least related to me having disabled WiFi connections to save battery life.  It normally isn't much of a problem except if neither dongle is handy and I want to use WiFi as I haven't found a way to enable WiFi without plugging in a USB dongle  >.  The laptop was upgraded to 6.6 from 6.4; I don't recall when I disabled the WiFi.
  

Friends, I have an Xbox 360 wireless controller, I installed the xpad and the controller works normally, but there is one problem: while I move the analog buttons, it controls the mouse. This really hinders me from enjoying Xbox Cloud. :012:  How to resolve this? Thank you very much in advance.

Here’s a weird one.  I’ve used LL versions 1 through 5 and never seen this before.

I recently bought a new PC. I’d prepared an LL 6.6 Live USB Boot drive ahead of time.

When I boot from the Live USB and use Chrome, I get full internet speed.  I can watch YouTube videos fullscreen at 1080p60fps with no dropped frames.  Even 1440p works fine, although 4K does start to stutter a little (which may be more to do with my integrated CPU).

However…

With LL 6.6 installed, everything works fine EXCEPT network speeds. YouTube videos now struggle to play at 480p, sometimes dropping to 360p and I’ve even seen 240p.

Internet speed tests reveal that, instead of the 40mbps that I would normally see, I’m lucky to get more than 2mbps.

This is consistent and repeatable. It occurs with every browser (Chrome, Brave and Firefox).

The only reason I can think of for this is that different ethernet driver(s) are being used on the Live USB and the installed version. I tried another Llinux version to test this (MX) and the results are the same.

Does anyone have an idea what’s going on and how I can fix this?

I have LinuxLite as one of several Linux OSs on a USB, using Ventoy. I would like to have the terminal command "chntpw" as part of the iso. This command is not part of LinuxLite, but I need it to be on the iso so that I can help people who have forgotten their password and need access to their laptop. The "chntpw" command allows me to delete the current Windows password, which allows the user to access their laptop again, without a password. They can then choose to create a password within Windows, if they so desire.

In other words, I need to be able to insert my USB into a laptop, and have the LinuxLite live USB come up, with the "chntpw" command already installed on the USB. That way, I don't need to have Internet access to download the chntpw command.

So, if there is a way to add a command to the iso before copying it to the USB, I need to know how to do that.

Thanks.