How do I restore the boot menu so I can boot into Linux Lite again?

I've been running my PC as a dual boot with Windows 10 and Linux Lite 5.2 64-bit, but after an update my PC only boots into Windows 10 and I'm not sure how to restore the boot menu.

:banghead

Hallo together,

nachdem mein erster Post so klasse gelöst wurde - danke trinidad - frage ich doch gleich nochmal, bevor ich noch weitere 4 Wochen herumstümpere...

Ich würde gern den Tastenkürzelbefehl strg+alt+D auf das gute alte Win+D umstellen, wie es in Linux Mint zB. auch geht.

Nun finde ich leider den hinterlegten Befehl dazu nicht, also wie der lauten muss, noch kann ich das funktionierende strg+alt+D auf Win+D umstellen.

Weiß jemand, wo man das findet oder wie der Befehl lauten muss, um ein neues Kürzel zu etablieren?

Danke euch!!

Roger

Hallo,

nachdem ich Linux Lite auf das System, das ich bei meinem Profil angeben habe installiert hatte, wurde automatisch für meine Grafikkarte ATI X700 SE der LLVMpipe Renderer Mesa 3.2 Treiber installiert. Gehofft hatte ich auf den open source Radeon Treiber. Mein problem ist jetzt, das ich anscheinend keine Grafikbeschleunigung erfahre. Schon bei einer eher anspruchlosen Videowiedergabe ruckelt es und die Prozessorauslastung steigt auf 100 %.
Als Linux frischling und nach ausgiebiger recherche, hoffe ich nun um Hilfe und würde mich über eine Antwort freuen.
Fehlt der geignete Treiber? Wenn ja, ist dieser verfügbar? Und wenn ja, wo?

MfG

Hello,

I recently installed 5.2 X64 and have a nagging sound issue pertaining to a very small volume control range.  Sound can only be adjusted on external USB speaker from 98-100% on the volume control slider in the bottom right of the system tray.  Any setting below 98% sound cannot be heard at all.  Speaker is displayed as "USB 2.0 Device Analog Stereo" with port set to "Analog Output".  This extremely limited volume control range makes the speaker seem like its either off or 100% volume.

I didn't come across anything in the help manual under sound configuration and google/forum searches didn't turn up much.  Thanks in advance for any assistance provided.

Linux Lite Series 3.x including the following releases - 3.0 3.2 3.4 3.6 and 3.8 as of April 1st 2021, will no longer be supported in any way.

That means no updates, no bug fixes for Linux Lite created software, no patches, no new software.

This also marks the end of 32bit Kernel builds.

If you are currently running a release from Series 3.x you have 2 choices. Run it without a network connection (turn your pc off when you are not infront of it), move to a higher Series (highly recommended). Anyone with physical access to your pc running Series 3.x can take advantage of ongoing unfixed bugs and security holes. Make sure your password is unhackable (18+ characters, upper, lower case, alphanumeric).

Make the sensible choice, move on to a higher Series before 1st April 2021.

If you are unsure if your hardware will run on Series 4.x or 5.x check your if hardware is listed here first - https://www.linuxliteos.com/hardware.php

Hallo zusammen,

komme von L. Mint aber Lite gefällt mir sehr gut.

Es scheint aber noch nicht ganz ausgereift zu sein, Kontextmenüs springen in der Sprache und die Einfach-Klick-Funktion funktioniert nicht systemweit - z.B. nicht auf dem Desktop, nur innerhalb von Ordnern/Fenstern.

Weiß jemand Rat?

Dank Euch!

Gruß
Roger

I am facing towards updates of software and getting the following message, Please help to resolve this issue

===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into a new or existing thread for assistance.

============ Log ===========

Reading package lists...
E: Could not get lock /var/lib/apt/lists/lock. It is held by process 1815 (apt-get)
E: Unable to lock directory /var/lib/apt/lists/

Hi, im newbi  hin linux lite and need some help (tank you all in advance)


Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into a new or existing thread for assistance.

============ Log ===========

Pogodak:1 http://archive.canonical.com focal InRelease
Pogodak:2 http://archive.ubuntu.com/ubuntu focal InRelease
Pogodak:3 http://archive.ubuntu.com/ubuntu focal-security InRelease
Zanemareno:4 http://ppa.launchpad.net/noobslab/apps/ubuntu focal InRelease
Pogodak:5 http://dl.google.com/linux/chrome/deb stable InRelease
Pogodak:6 http://archive.ubuntu.com/ubuntu focal-updates InRelease
Pogodak:7 http://archive.ubuntu.com/ubuntu focal-backports InRelease
Pogodak:8 http://ppa.launchpad.net/persepolis/ppa/ubuntu focal InRelease
Pogodak:9 http://ppa.launchpad.net/pinta-maintaine...ble/ubuntu focal InRelease
Pogodak:10 http://repo.linuxliteos.com/linuxlite emerald InRelease
Greška:11 http://ppa.launchpad.net/noobslab/apps/ubuntu focal Release
  404  Not Found [IP: 91.189.95.85 80]
Čitanje popisa paketa...
E: Repozitorij 'http://ppa.launchpad.net/noobslab/apps/ubuntu focal Release' ne sadrži datoteku izdanja.

Hi, here is my problem. OS recognizes the printer (like 3700 ser.), but does not print/scan (message "Printer may not be connected" in Printer-settings dialog window or Print Queue).
I'm trying to install latest HPLIP from https://developers.hp.com/hp-linux-imagi...g/gethplip, but the process stucks in the phase:

RUNNING HPLIP LIBS COMMANDS
sudo apt-get remove libhpmud0 libsane-hpaio printer-driver-postscript-hp

Anybody have an advice/solution pls??? Thank you! JC

(Acer Aspire 5315, Linux Lite 5.2, printer HP DeskJet Ink Advantage 3775)

Hi,

I am a LL newbie, so maybe I am doing something wrong. Any help would be appreciated.

I have Linux Lite 5.2, multiboot, on my notebook (for specifications please see the end of my post). I am using LL since a few weeks along with Ubuntu 18.04, Debian 10 and 11 and Windows 10. Bootup speed and performance were ok first, but lately booting takes ages, shows a lot of "FAILED" lines until it reaches login; and after that the system freezes occasionally unexpectedly, sometimes so stubborn that <Ctrl>+<Alt>+<F2> has no effect at all and only a hard switch off is a rescue. Generally, the performance during normal use is slower. The other multiboot distros seem to be unaffected (only Win10 has been always slow, anyway).

What could be the reason and could that be amended, please?

Thanks, litecub

My system
********
Machine:  Type: Laptop System: SAMSUNG product: 300E4C/300E5C/300E7C
          Chassis: type: 9 v: 0.1 serial: <filter>
CPU:      Topology: Dual Core model: Intel Core i3-2328M bits: 64 type: MT MCP
Graphics:  Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
          resolution: 1366x768~60Hz
Network:  Device-1: Qualcomm Atheros AR9485 Wireless Network Adapter
Drives:    Local Storage: total: 465.76 GiB used: 8.45 GiB (1.8%)
          ID-1: /dev/sda vendor: Seagate model: ST500LM012 HN-M500MBB size: 465.76 GiB

Partition: ID-1: / raw size: 30.06 GiB size: 29.46 GiB (98.01%) used: 8.45 GiB (28.7%) fs: ext4
          dev: /dev/sda10
          ID-2: swap-1 size: 7.51 GiB used:  /dev/sda2

P.S. I detected the "FAILED" lines after changing GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="" in /etc/default/grub.

P.P.S. Neither the Preview button nor "shift+alt+p" to preview have any effect on my forum thread