Hello
How would I go about installing and setting up "thinkfan" to controll my Thinkpad's system fan 1?
And how to make it start with the system permanently?
What information do I need to paste here from my hardware? And what commands would they be?
I need it to be quiet when doing nothing in particular and revs higher only after 55'C degrees Celsius.
Also wondering is there a way to read more fan speed steps than low rpm and high rpm? Would love for it to have at lest 3 or 4 steps on different levels of heat.
Does this thinkfan software affect the hdd temps badly in real life situation use?
Thank you in advance,
vaikus84
[attachment deleted by admin]
Hello People of Linux Lite
Does someone have extensive experience on optimizing the Intel HD 4000 graphics card on a Lenovo Thinkpad T430 when it's the only graphics chip in the system?
(having tearing issues)
And is there a way so that the graphics memory and clock speed can ramp up to maximum specified usage when needed and use low power and memory when not needed for intensive tasks?
(It seems to use very little of the available memory).
Is there a way to see the exact maximum usage in the command line?
My graphics hardware info looks like this:
[ 22.182] (--) intel(0): Integrated Graphics Chipset: Intel® HD Graphics 4000
[ 22.182] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 22.182] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 22.182] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 22.182] (==) intel(0): RGB weight 888
[ 22.182] (==) intel(0): Default visual is TrueColor
[ 22.182] (**) intel(0): Framebuffer tiled
[ 22.182] (**) intel(0): Pixmaps tiled
[ 22.182] (**) intel(0): "Tear free" disabled
[ 22.182] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 22.182] (II) intel(0): Output LVDS1 has no monitor section
[ 22.183] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 22.183] (II) intel(0): Output VGA1 has no monitor section
[ 22.183] (II) intel(0): Output HDMI1 has no monitor section
[ 22.183] (II) intel(0): Output DP1 has no monitor section
[ 22.183] (II) intel(0): Output HDMI2 has no monitor section
[ 22.183] (II) intel(0): Output HDMI3 has no monitor section
[ 22.183] (II) intel(0): Output DP2 has no monitor section
[ 22.183] (II) intel(0): Output DP3 has no monitor section
[ 22.183] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 22.183] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 22.183] (--) intel(0): Output DP1 using initial mode 1920x1080 on pipe 1
[ 22.183] (==) intel(0): DPI set to (96, 96)
[ 22.183] (II) Loading sub module "dri2"
[ 22.183] (II) LoadModule: "dri2"
[ 22.183] (II) Module "dri2" already built-in
[ 22.183] (II) UnloadModule: "modesetting"
[ 22.183] (II) Unloading modesetting
[ 22.183] (II) UnloadModule: "fbdev"
[ 22.183] (II) Unloading fbdev
[ 22.183] (II) UnloadSubModule: "fbdevhw"
[ 22.183] (II) Unloading fbdevhw
[ 22.183] (II) UnloadModule: "vesa"
[ 22.183] (II) Unloading vesa
[ 22.183] (==) Depth 24 pixmap format is 32 bpp
[ 22.183] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 22.183] (==) intel(0): Backing store enabled
[ 22.183] (==) intel(0): Silken mouse enabled
[ 22.183] (II) intel(0): HW Cursor enabled
[ 22.183] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 22.184] (==) intel(0): DPMS enabled
[ 22.184] (II) intel(0): [DRI2] Setup complete
[ 22.184] (II) intel(0): [DRI2] DRI driver: i965
[ 22.184] (II) intel(0): [DRI2] VDPAU driver: i965
[ 22.184] (II) intel(0): direct rendering: DRI2 Enabled
[ 22.184] (==) intel(0): hotplug detection: "enabled"
[ 22.184] (--) RandR disabled
[ 22.187] (II) SELinux: Disabled on system
Thank you in advance,
vaikus84
Hello
I'm new to Linux Lite. How would I go about optimizing My HDD to work balanced and long on it?
Meaning : scheduler / hdparm etc.
Would love to use TLP for it. So I could potentially tweak some other aspects of power management also like - Runtime Power Management / advanced power management / SATA aggressive link power management (ALPM) / PCI Express Active State Power Management (PCIe ASPM) etc.
Also would love to know the best balanced settings for those mentioned.
Any advice on what settings to use for this?:
(From what I understand this gives info to hdparm so essentially those are numbers to send to hdparm?)
# Hard disk advanced power management level: 1(max saving)..254(off)
# Levels 1..127 may spin down the disk.
# Separate values for multiple devices with spaces.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="160 160"
Also how to set up the Lenovo Thinkpad T430's Free-fall sensor correctly?
Thank you in advance,
vaikus84
Hi
I'm a newcomer to Linux Lite. Stepped in at version 2.2 64bit.
My hardware is a Lenovo Thinkpad T430:
cpu@0 processor Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz
memory 32KiB L1 cache
memory 256KiB L2 cache
memory 3MiB L3 cache
memory 32KiB L1 cache
memory 4GiB System Memory
memory 2GiB SODIMM DDR3 Synchronous 1600 MHz (0,6 ns)
memory 2GiB SODIMM DDR3 Synchronous 1600 MHz (0,6 ns)
memory 128KiB BIOS
pci@0000:00:00.0 bridge 3rd Gen Core processor DRAM Controller
pci@0000:00:02.0 display 3rd Gen Core processor Graphics Controller
pci@0000:00:14.0 bus 7 Series/C210 Series Chipset Family USB xHCI Host Controller
pci@0000:00:16.0 communication 7 Series/C210 Series Chipset Family MEI Controller #1
pci@0000:00:19.0 eth0 network 82579LM Gigabit Network Connection
pci@0000:00:1a.0 bus 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2
pci@0000:00:1b.0 multimedia 7 Series/C210 Series Chipset Family High Definition Audio Controller
pci@0000:00:1c.0 bridge 7 Series/C210 Series Chipset Family PCI Express Root Port 1
pci@0000:02:00.0 generic MMC/SD Host Controller
pci@0000:00:1c.1 bridge 7 Series/C210 Series Chipset Family PCI Express Root Port 2
pci@0000:03:00.0 wlan0 network Centrino Advanced-N 6205 [Taylor Peak]
pci@0000:00:1c.2 bridge 7 Series/C210 Series Chipset Family PCI Express Root Port 3
pci@0000:00:1d.0 bus 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1
pci@0000:00:1f.0 bridge QM77 Express Chipset LPC Controller
pci@0000:00:1f.2 storage 7 Series Chipset Family 6-port SATA Controller [AHCI mode]
pci@0000:00:1f.3 bus 7 Series/C210 Series Chipset Family SMBus Controller
scsi0 storage
scsi@0:0.0.0 /dev/sda disk 320GB ST320LT007-9ZV14
scsi@0:0.0.0,1 /dev/sda1 volume 3905MiB EXT4 volume
scsi@0:0.0.0,2 /dev/sda2 volume 294GiB Extended partition
/dev/sda5 volume 5858MiB Linux swap / Solaris partition
/dev/sda6 volume 28GiB Linux filesystem partition
/dev/sda7 volume 259GiB Linux filesystem partition
scsi1 storage
scsi@1:0.0.0 /dev/cdrom disk DVD RW AD-7740H
power 45N1001
wwan0 network Ethernet interfaceAdditional info:
[ 22.182] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 22.182] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 22.182] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 22.182] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 22.182] (==) intel(0): RGB weight 888
[ 22.182] (==) intel(0): Default visual is TrueColor
[ 22.182] (**) intel(0): Framebuffer tiled
[ 22.182] (**) intel(0): Pixmaps tiled
[ 22.182] (**) intel(0): "Tear free" disabled
[ 22.182] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 22.182] (II) intel(0): Output LVDS1 has no monitor section
[ 22.183] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 22.183] (II) intel(0): Output VGA1 has no monitor section
[ 22.183] (II) intel(0): Output HDMI1 has no monitor section
[ 22.183] (II) intel(0): Output DP1 has no monitor section
[ 22.183] (II) intel(0): Output HDMI2 has no monitor section
[ 22.183] (II) intel(0): Output HDMI3 has no monitor section
[ 22.183] (II) intel(0): Output DP2 has no monitor section
[ 22.183] (II) intel(0): Output DP3 has no monitor section
[ 22.183] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 22.183] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 22.183] (--) intel(0): Output DP1 using initial mode 1920x1080 on pipe 1
[ 22.183] (==) intel(0): DPI set to (96, 96)
[ 22.183] (II) Loading sub module "dri2"
[ 22.183] (II) LoadModule: "dri2"
[ 22.183] (II) Module "dri2" already built-in
[ 22.183] (II) UnloadModule: "modesetting"
[ 22.183] (II) Unloading modesetting
[ 22.183] (II) UnloadModule: "fbdev"
[ 22.183] (II) Unloading fbdev
[ 22.183] (II) UnloadSubModule: "fbdevhw"
[ 22.183] (II) Unloading fbdevhw
[ 22.183] (II) UnloadModule: "vesa"
[ 22.183] (II) Unloading vesa
[ 22.183] (==) Depth 24 pixmap format is 32 bpp
[ 22.183] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 22.183] (==) intel(0): Backing store enabled
[ 22.183] (==) intel(0): Silken mouse enabled
[ 22.183] (II) intel(0): HW Cursor enabled
[ 22.183] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 22.184] (==) intel(0): DPMS enabled
[ 22.184] (II) intel(0): [DRI2] Setup complete
[ 22.184] (II) intel(0): [DRI2] DRI driver: i965
[ 22.184] (II) intel(0): [DRI2] VDPAU driver: i965
[ 22.184] (II) intel(0): direct rendering: DRI2 Enabled
[ 22.184] (==) intel(0): hotplug detection: "enabled"
[ 22.184] (--) RandR disabled
[ 22.187] (II) SELinux: Disabled on systemCore i5-3320m @ 2.6GHz, 4GB DDR3, 320GB Sata HDD, DVDRW, 14,1" HD+ LED 1600x900, Intel HD4000 video, WiFi N-6205, BlueTooth, 3G WWAN H5321gw, Lenovo Smartcard reader, Webcam, mini-DisplayPort, VGA, 2x USB 3.0, 1x USB, SD/MMC Card Reader , Fingerprint ReaderWondering if someone here already has experience in setting up this particular machine.
Meaning:
*Thinkfan software (so it's quiet when doing nothing in particular and revs higher only after 55'C degrees Celsius) and so thinkfan starts automatically with the system
*Free-fall sensor (getting it to work correctly)
*Setting up Pulseaudio to have Noise Cancellation for the Mic
*Setting up pulseaudio to have DisplayPort audio visible in pavucontrol
*Setting up powermanagement to be as efficient as possible to have longer batterylife / Maybe someone knows TLP well here, because I've used it on other Distros so far, but I don't know the nifty specific stuff for it on a ThinkPad
*How to set up all the FN keys and special function keys to work ( ThinkVantage button, Mic Mute button )
*How to optimize Intel HD 4000 graphics ( so no tearing occurs and graphics memory can ramp up to maximum specified )
*How to optimize HDD / scheduler / hdparm etc.
*How to set the right display color profile (ICC)
*How to start Intel CPU Microcode with the system
*How to set up the Synaptics Touchpad with all it's functions
*And how to get bluetooth and 3g modem properly to work
*And maybe something else that I'm missing
Thank you in advance and nice Distro,
vaikus84
Hello I have a old xp and I made a cd but my pc will not boot from a cd it will only boot from floppy disk? Is there a why I can make it boot from a cd. thank you. :
gold_finger has created a significant new addition to the Help Manual - Customize Your Desktop
This is an incredible amount of work that we hope people will both appreciate and find useful.
[img height=600 width=735]http://i.imgur.com/lRdUTuY.png[/img]
Thanks also to misko for his ideas and suggestions during the creation of this addition.
Download updates to get the new version, as usual it is also available online.
Anybody having this problem besides me? I am streaming the news and the audio and video are out of sync. I've tried Firefox and Chrome..same problem. I've run into this in the past and seems flash player eventually updates and everything clears up. Could this be my problem now? Anybody having similar difficulty?
So how do make it right is it a patch or how? Tell me / Iwar
I installed Google earth and tried to run it but it must have changed from when I was running it a few years ago on Win XP as I received a notice that my graphics card was not sufficiently accelerated and that the program would not work.
Since it's useless to have it there...how do I get rid of it completely from my system?
Thanks
alex
Hi Guy's. I inherited an old Laptop. An eee 1000h with ubuntu 6 already installed on it. There is another os on it, as far as I can make out, but have no idea what it could be. Probably one of the windows.
Don't like Ubuntu and want to install Linus Lite 2, which I have on my Desktop PC. The thing is I cannot seem to get it to install. Well it goes so far, then hangs up on the subject of Mounting/Unmounting some drive or drive. So every time thats where it all ends. Expecting to get LL 2.2 soon by post from Canada, but when I have no idea. Been waiting since Christmas and am quite excited at the pros[pect of having it on my computer.
It would be great if I could get rid of Ubuntu and then I would have no problem installing LL, but it seems from what I have read elsewhere, that it is an almost impossible task. Really? Why? I would like to clear the lot out and just have LL as the sole os on the machine. Any ideas as to how I can achieve this? Any input at all would be so appreciated. Regards Walt