I am thinking to upgrade my RAM.

Here is what Linux tells about my current module:

Handle 0x003C, DMI type 17, 40 bytes
Memory Device
  Array Handle: 0x003A
  Error Information Handle: Not Provided
  Total Width: 64 bits
  Data Width: 64 bits
  Size: 8192 MB
  Form Factor: SODIMM
  Set: None
  Locator: DIMM B
  Bank Locator: BANK 2
  Type: DDR4
  Type Detail: Synchronous
  Speed: 2400 MT/s
  Manufacturer: Micron
  Serial Number: 128BADF8
  Asset Tag: 0F161800
  Part Number: 8ATF1G64HZ-2G3B1 
  Rank: 1
  Configured Clock Speed: 2133 MT/s
  Minimum Voltage: 1.2 V
  Maximum Voltage: 1.2 V
  Configured Voltage: 1.2 V


Why does "speed" and "configured clock Liteblue speed" differ?

Does Linux Lite have support for this? If so, are there any instructions that are easy to follow?

Thanks

Hello Everyone, I am new in this community and I am learning mongodb. I have some queries related to clustering and its application, I am in beginner's face so currently, I want to clear my basic on mongodb. Can anyone tell mongodb stores the information in rather an unstructured format as compared to structured tables like in MySQL or PostgreSQL?

===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into a new or existing thread for assistance.

============ Log ===========

Hit:1 http://archive.canonical.com/ubuntu bionic InRelease
Hit:2 http://us.archive.ubuntu.com/ubuntu bionic InRelease
Hit:3 http://repo.linuxliteos.com/linuxlite diamond InRelease
Hit:4 http://us.archive.ubuntu.com/ubuntu bionic-security InRelease
Hit:5 http://repository.spotify.com stable InRelease
Hit:7 http://us.archive.ubuntu.com/ubuntu bionic-updates InRelease
Hit:8 https://repo.nordvpn.com/deb/nordvpn/debian stable InRelease
Hit:9 http://us.archive.ubuntu.com/ubuntu bionic-backports InRelease
Hit:10 http://ppa.launchpad.net/teejee2008/ppa/ubuntu bionic InRelease
Get:6 http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu bionic InRelease [15.4 kB]
Reading package lists...
E: Repository 'http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu bionic InRelease' changed its 'Label' value from 'gimp' to 'gimp stable'

Hi;relatively new to Linux but an  "old dog" with MS PCs.
I attempt to upgrade from what is supposed to be LL 4.4 to 4.8. Here is what System Info tells me:
SummaryComputer[table][tr][td]Processor[/td][td]AMD A8-3820 APU with Radeon™ HD Graphics[/td][/tr] [tr][td]Memory[/td][td]11765MB (1000MB used)[/td][/tr] [tr][td]Machine Type[/td][td]Desktop[/td][/tr] [tr][td]Operating System[/td][td]Linux Lite 4.4[/td][/tr] [tr][td]User Name        .....[/td][td][/td][/tr] [tr][td]Date/Time[/td][td]Mon 10 Feb 2020 11:27:06 AM CST[/td][/tr][/table]
Attached is the log of the failing update.
Lite Upgrade laconically tells me "You are already running the latest release." Since that tool {Upgrade} seems to be for ugrades to other series like 5 it may be correct.

But how do I get to 4.8 without a completely new install?

Any helpful tips are highly appreciated.
TIA Eike

Good morning.
Today I needed to use Pinta so I installed it from the LiteSoftware screen and when I tried to run it, it took 2 or 3 seconds, then rapidly showed an EMPTY window frame and then nothing. Nothing shows as open on the panel, either.

Rebooted and tried it again to no avail.

Completely uninstalled Pinta and then reinstalled it from somewhere else, but with the same results. This was repeated twice from different places.  It never showed any dependency problem.  The only version I was able to try is 1.6-2

This on a fresh LL installation, up-to-date.

I had never had any problem with Pinta, ever.  Does anybody have a clue?

Thank you.

<------- PS: All of my computer's data is here on the left column.

Apologies if this is in the wrong place
I've just updated and got this error message

===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into a new or existing thread for assistance.

============ Log ===========

Hit:1 http://archive.canonical.com/ubuntu bionic InRelease
Hit:2 http://gb.archive.ubuntu.com/ubuntu bionic InRelease
Get:3 http://gb.archive.ubuntu.com/ubuntu bionic-security InRelease [88.7 kB]
Get:4 http://gb.archive.ubuntu.com/ubuntu bionic-updates InRelease [88.7 kB]
Hit:5 http://www.mirrorservice.org/sites/repo..../linuxlite diamond InRelease
Get:6 http://gb.archive.ubuntu.com/ubuntu bionic-backports InRelease [74.6 kB]
Ign:7 http://dl.google.com/linux/chrome/deb stable InRelease
Hit:8 http://dl.google.com/linux/chrome/deb stable Release
Ign:9 http://ppa.launchpad.net/lubuntu-desktop/ppa/ubuntu bionic InRelease
Hit:10 https://repo.skype.com/deb stable InRelease
Hit:11 http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu bionic InRelease
Hit:12 http://ppa.launchpad.net/teejee2008/ppa/ubuntu bionic InRelease
Err:13 http://ppa.launchpad.net/lubuntu-desktop/ppa/ubuntu bionic Release
  404  Not Found [IP: 91.189.95.83 80]
Reading package lists...
E: The repository 'http://ppa.launchpad.net/lubuntu-desktop/ppa/ubuntu bionic Release' does not have a Release file.
1st time i've had a message like this
So,whats the answer
Thanks

Hi,new boy here,mind you i'm 57,lol
Been using linux for the last 2 years,but only doing basic stuff,so still very wet behind the ears
Used a few distros,but this has come out tops,i've even got my SWMBO to ditch m$
So,bare with my infant stupid questions ;D
Chris

I installed XAMPP 32bit version  5.6.23-0 in Linux Lite version 3.8.  Install went without a problem but whenever I clikc any of the control panel links to go to the XAMPP dashboard, it gives a dialog box that says "Failed to execute default Web Browser" "input/output error."
I only have Chromium installed, but the same error occurs if I remove Chromium and install Firefox.  I have search for "Failed to execute default Web Browser" and can find no solutions that work.  Any ideas?

"We (Canonical) are building the Focal / 20.04 LTS kernel based on the upstream 5.4 kernel, and not the recent Linux 5.5 release."

Source - https://lists.ubuntu.com/archives/kernel...07227.html