
So..... I tried installing the UEFI build 4.2 for LL on my UEFI Acer laptop. E5-722-49HD. The live usb that I made with uNetbootin seemed to work fine. It was a little slow on boot but everything booted up into the live environment. I installed on to the laptop from there and did not receive any errors. When I rebooted though, it only boots into Win 10. Yes I installed LL 4.2 along side win 10. I went back into the live environment and can see the area allocated for LL. But I can't seem to get it to load. I went into setup and UEFI is enabled along with secure boot. However I cannot go into the secure boot and turn if off. What am I or did I do wrong? Any thought would be great, Thank you.
Tengo un pc de escritorio que le instale Linux Lite 4.8, la placa es Bios, por lo que el formato del disco también lo deje en MBR, aun que lo probé en GPT, pero da el miso error. Anteriormente tenia instalado windows, pero lo quise pasar a Linux Lite por la mejora en el rendimiento.
En fin, desde el primer arranque realmente no apaga el computador, solo cierra el sistema operativo.
En un principio pensé que había dado algún error en la instalación he instale todo de nuevo. Pero me dio el mismo error.
Probé varias posibles soluciones, cambiar configuración de ACPI, grub, actualice la bios de la placa (Bios por Intel Board DG33BU), instale en GPT, actualice y probé diferentes kernel linux, pero nada de la solución.
Alguien le a pasado, como lo ha solucionado.
Que otras pruebas puedo hacer.
Adjunto foto del error...
Desde ya muchas gracias
Ricardo Javier
________Traducción por Google
I have a desktop pc that installs Linux Lite 4.8, the board is Bios, so the disk format also leaves it in MBR, even though I tried it in GPT, but it gives the same error. Previously, I had windows installed, but I wanted to upgrade to Linux Lite due to improved performance.
Anyway, from the first start it does not really turn off the computer, it only closes the operating system.
At first I thought that there was an error in the installation and I installed everything again. But it gave me the same error.
I tried various possible solutions, change ACPI settings, grub, update the motherboard bios (Bios by Intel Board DG33BU), install in GPT, update and tried different linux kernel, but none of the solution.
Someone has happened to you, as you have solved it.
What other tests can I do.
Attached photo of the error ...
From already thank you very much
Ricardo Javier
My current LL 4.8 system is on a 64GB ssd and I wanted to copy it to a bigger 128 ssd that I have. I already booted from a USB drive and use gparted to copy the partition of the 64GB disk to the 128GB disk. In the bios I made the 128GB the startup disk. When rebooting the computer would not boot. So I put the start up disk back to the 64GB disk and when the computer booted again, it booted from the 128GB disk. I unplugged the sata cable from the 128GB disk and the computer booted from the 64GB, but now there is a grub menu at startup.
I'm thinking I'll boot from the usb drive again with only the 128GB drive connected, use gparted to erase that partition. I'll do some research to remove the grub menu from the startup of the 64GB drive and I'll be back where I started.
So... what's the best way to clone your LL startup disk to a new bigger disk?
Thanks
Hi,
I love to use the screenshot tool Shutter for his well intergrated image manipulation functions. But until now they do not work under Linux Lite.
[size=1.45em]Some images documenting the issue:[/size]
![[Image: 0SSOuIYl.png]](https://i.imgur.com/0SSOuIYl.png)
If I try to install "libgoo-canvas-perl_0.06-2+b1_amd64.deb" via "https://debian.pkgs.org/8/debian-main-am...4.deb.html" the dependencies are not fullfilled:
[color=rgb(33, 37, 41)]
![[Image: 3rJwZsfl.png]](https://i.imgur.com/3rJwZsfl.png)
I've also tried to solve the issue with Synaptics, but the installation of the following packages has not solved the issue.
[/color]
[size=1.45em]Can you please add the needed package(s) to the repositories of Linux Lite![/size]
[size=1.35em]PS: Installation status of perlapi:[/size]
Hello All,
I migrated from Win 8 to LL 4.8 what was quite easy, but now I'm struggeling with the setup of my Epson XP-445 Networkscanner.
The print function is working by network
Here the steps I tried
> Downloaded the scanner driver from Epson http://support.epson.net/linux/en/imagescanv3.php
Driver >> Ubuntu-16.04-3.62.0.x64deb
> Copied to home / user
> Depacked >> See attached pic
> Run terminal at that folder location
> Start install process with ./install.sh
At the end there is something written that libboost-filesystem1.67.0 not found
I checked the Epson install tutorial but I didn't got a solution.
Did somebody have an idea how to solve this issue?
Thanks and Greetings
Nanayaw
Hello everyone.
My name is Teguh. I am from Bali - Indonesia. I am using linux lite for 2 years. I love using this because have XFCE4
I hope in this forums, there are many user using Linux Lite OS from Indonesia.
If you from Indonesia. lets talk in this thread.
Thank you
how do i edit and configure this file(freshclam.conf). When running freshclam the process timeouts after 30 secs and i need to extend this to 60 secs or more if required. Thanks.

I just installed Linux Lite on my ASUS Notebook 1005 PE which has an embedded numeric keypad in the alpha portion of the keyboard. Unfortunately, the installation has set the default keyboard layout to recognize the numeric keypad. This has messed up my passwords. Is there a solution outside of reinstalling. I have reinstalled 3 times. Any help will be appreciated. Like where do the keyboard definitions live?
After logging into this forum and reading the posts I was unable to log out. I was unable to find a logout button as directed by other users. Please help
Hello All I'm trying to install a Dell v305 printer/scanner(only one avail.at this time) to my Linux Lite system. On the initial setup the Linux lite and Ubuntu 18.04 will find the printer, however there are no drivers to connect the printer. Are there any generic printer drivers available to connect Linux lite or Ubuntu 18.04. Are there other printers that are more compatible to linux ??
