When I try to update or do any installs on synaptic, I get these errors!  Help!

W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth-pro.list:3W: Target Packages (main/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth-pro.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth-pro.list:3
W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth-pro.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth-pro.list:3
W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth.list:3
W: Target Packages (main/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth.list:3
W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth.list:3
N: Skipping acquire of configured file 'main/binary-i386/Packages' as repository 'http://dl.google.com/linux/earth/deb stable InRelease' doesn't support architecture 'i386'
W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth-pro.list:3
W: Target Packages (main/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth-pro.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth-pro.list:3
W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth-pro.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth-pro.list:3
W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth.list:3
W: Target Packages (main/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth.list:3
W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth.list:3
W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth.list:3
W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/google-earth-ec.list:3 and /etc/apt/sources.list.d/google-earth.list:3

i try to connect hdd 4 tb to linuxlite, the first is ok but, now not connected and fail to mount. but if i try to connect to Windows 10 it's still ok. how to solve this problem, tq....

I may have done a dumb thing. I backed my master hard drive and got a pop-up window saying that there were two kernels of data taking up a large amount of hard drive space,and I should remove them.
I did. Now when I try to open up my photo's the computer hangs for a very long time before it will allows me to view a photo or select the next one in line.
Is there a way to do a 'system restore" in linux lite?

Hi, I recently installed LL 4.8 on an old HP Compaq 6710b laptop. It installed perfectly fine and I'm currently writing this post from there, so it works fine and fast once logged in. But every time I boot (no dual boot, LL only) it takes a lot of time to reach to desktop. Similarly when I shut down, it takes some time to do it, more than it should.
So I've taken a look to dmesg and have found that there is some problem than repeats over boot time (and also at shutdown) and slows things down a lot:

Quote:q-6710b-GB889ET-ABE kernel: [  13.280068] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:34:pipe A] flip_done timed out
Apr  1 21:52:52 HP-Compaq-6710b-GB889ET-ABE kernel: [  13.384046] ------------[ cut here ]------------
Apr  1 21:52:52 HP-Compaq-6710b-GB889ET-ABE kernel: [  13.384047] vblank wait timed out on crtc 0
Apr  1 21:52:52 HP-Compaq-6710b-GB889ET-ABE kernel: [  13.384120] WARNING: CPU: 0 PID: 91 at /build/linux-ZcR2Eb/linux-4.15.0/drivers/gpu/drm/drm_vblank.c:1081 drm_wait_one_vblank+0x188/0x190 [drm]

So I got Lite 4.8 running (thanks for the help from a previous post). Now I screwed up Wine quite badly.

Thought I could upgrade to the latest wine-stable (5.0) and somehow ended up with a version mistmatch 547/597. I did everything, updates, repository adds, etc from the command line.

Basically just want Directx 11 to work. Now I'm not sure what I did, or how to fix it.

Any help would be greatly appreciated. Thank you!

So..... I tried installing the UEFI build 4.2 for LL on my UEFI Acer laptop. E5-722-49HD. The live usb that I made with uNetbootin seemed to work fine. It was a little slow on boot but everything booted up into the live environment. I installed on to the laptop from there and did not receive any errors. When I rebooted though, it only boots into Win 10. Yes I installed LL 4.2 along side win 10. I went back into the live environment and can see the area allocated for LL. But I can't seem to get it to load. I went into setup and UEFI is enabled along with secure boot. However I cannot go into the secure boot and turn if off. What am I or did I do wrong? Any thought would be great, Thank you.

Tengo un pc de escritorio que le instale Linux Lite 4.8, la placa es Bios, por lo que el formato del disco también lo deje en MBR, aun que lo probé en GPT, pero da el miso error. Anteriormente tenia instalado windows, pero lo quise pasar a Linux Lite por la mejora en el rendimiento.
En fin, desde el primer arranque realmente no apaga el computador, solo cierra el sistema operativo.
En un principio pensé que había dado algún error en la instalación he instale todo de nuevo. Pero me dio el mismo error.
Probé varias posibles soluciones, cambiar configuración de ACPI, grub, actualice la bios de la placa (Bios por Intel Board DG33BU), instale en GPT, actualice y probé diferentes kernel linux, pero nada de la solución.
Alguien le a pasado, como lo ha solucionado.
Que otras pruebas puedo hacer.
Adjunto foto del error...
Desde ya muchas gracias

Ricardo Javier

________Traducción por Google

I have a desktop pc that installs Linux Lite 4.8, the board is Bios, so the disk format also leaves it in MBR, even though I tried it in GPT, but it gives the same error. Previously, I had windows installed, but I wanted to upgrade to Linux Lite due to improved performance.
Anyway, from the first start it does not really turn off the computer, it only closes the operating system.
At first I thought that there was an error in the installation and I installed everything again. But it gave me the same error.
I tried various possible solutions, change ACPI settings, grub, update the motherboard bios (Bios by Intel Board DG33BU), install in GPT, update and tried different linux kernel, but none of the solution.
Someone has happened to you, as you have solved it.
What other tests can I do.
Attached photo of the error ...
From already thank you very much

Ricardo Javier

My current LL 4.8 system is on a 64GB ssd and I wanted to copy it to a bigger 128 ssd that I have.  I already booted from a USB drive and use gparted to copy the partition of the 64GB disk to the 128GB disk.  In the bios I made the 128GB the startup disk.  When rebooting the computer would not boot. So I put the start up disk back to the 64GB disk and when the computer booted again, it booted from the 128GB disk. I unplugged the sata cable from the 128GB disk and the computer booted from the 64GB, but now there is a grub menu at startup. 


I'm thinking I'll boot from the usb drive again with only the 128GB drive connected, use gparted to erase that partition.  I'll do some research to remove the grub menu from the startup of the 64GB drive and I'll be back where I started.


So...  what's the best way to clone your LL startup disk to a new bigger disk?


Thanks

Hi,

I love to use the screenshot tool Shutter for his well intergrated image manipulation functions. But until now they do not work under Linux Lite.

[size=1.45em]Some images documenting the issue:[/size]




If I try to install "libgoo-canvas-perl_0.06-2+b1_amd64.deb" via "https://debian.pkgs.org/8/debian-main-am...4.deb.html" the dependencies are not fullfilled:

[color=rgb(33, 37, 41)]




I've also tried to solve the issue with Synaptics, but the installation of the following packages has not solved the issue.


[/color]
[size=1.45em]Can you please add the needed package(s) to the repositories of Linux Lite![/size]


[size=1.35em]PS: Installation status of perlapi:[/size]

Hello All,

I migrated from Win 8 to LL 4.8 what was quite easy, but now I'm struggeling with the setup of my Epson XP-445 Networkscanner.
The print function is working by network

Here the steps I tried
> Downloaded the scanner driver from Epson http://support.epson.net/linux/en/imagescanv3.php
  Driver >> Ubuntu-16.04-3.62.0.x64deb
> Copied to home / user
> Depacked >> See attached pic
> Run terminal at that folder location
> Start install process with ./install.sh

At the end there is something written that libboost-filesystem1.67.0 not found

I checked the Epson install tutorial but I didn't got a solution.

Did somebody have an idea how to solve this issue?

Thanks and Greetings

Nanayaw