Hello,

I recently installed 5.2 X64 and have a nagging sound issue pertaining to a very small volume control range.  Sound can only be adjusted on external USB speaker from 98-100% on the volume control slider in the bottom right of the system tray.  Any setting below 98% sound cannot be heard at all.  Speaker is displayed as "USB 2.0 Device Analog Stereo" with port set to "Analog Output".  This extremely limited volume control range makes the speaker seem like its either off or 100% volume.

I didn't come across anything in the help manual under sound configuration and google/forum searches didn't turn up much.  Thanks in advance for any assistance provided.

Linux Lite Series 3.x including the following releases - 3.0 3.2 3.4 3.6 and 3.8 as of April 1st 2021, will no longer be supported in any way.

That means no updates, no bug fixes for Linux Lite created software, no patches, no new software.

This also marks the end of 32bit Kernel builds.

If you are currently running a release from Series 3.x you have 2 choices. Run it without a network connection (turn your pc off when you are not infront of it), move to a higher Series (highly recommended). Anyone with physical access to your pc running Series 3.x can take advantage of ongoing unfixed bugs and security holes. Make sure your password is unhackable (18+ characters, upper, lower case, alphanumeric).

Make the sensible choice, move on to a higher Series before 1st April 2021.

If you are unsure if your hardware will run on Series 4.x or 5.x check your if hardware is listed here first - https://www.linuxliteos.com/hardware.php

Hallo zusammen,

komme von L. Mint aber Lite gefällt mir sehr gut.

Es scheint aber noch nicht ganz ausgereift zu sein, Kontextmenüs springen in der Sprache und die Einfach-Klick-Funktion funktioniert nicht systemweit - z.B. nicht auf dem Desktop, nur innerhalb von Ordnern/Fenstern.

Weiß jemand Rat?

Dank Euch!

Gruß
Roger

I am facing towards updates of software and getting the following message, Please help to resolve this issue

===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into a new or existing thread for assistance.

============ Log ===========

Reading package lists...
E: Could not get lock /var/lib/apt/lists/lock. It is held by process 1815 (apt-get)
E: Unable to lock directory /var/lib/apt/lists/

Hi, im newbi  hin linux lite and need some help (tank you all in advance)


Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into a new or existing thread for assistance.

============ Log ===========

Pogodak:1 http://archive.canonical.com focal InRelease
Pogodak:2 http://archive.ubuntu.com/ubuntu focal InRelease
Pogodak:3 http://archive.ubuntu.com/ubuntu focal-security InRelease
Zanemareno:4 http://ppa.launchpad.net/noobslab/apps/ubuntu focal InRelease
Pogodak:5 http://dl.google.com/linux/chrome/deb stable InRelease
Pogodak:6 http://archive.ubuntu.com/ubuntu focal-updates InRelease
Pogodak:7 http://archive.ubuntu.com/ubuntu focal-backports InRelease
Pogodak:8 http://ppa.launchpad.net/persepolis/ppa/ubuntu focal InRelease
Pogodak:9 http://ppa.launchpad.net/pinta-maintaine...ble/ubuntu focal InRelease
Pogodak:10 http://repo.linuxliteos.com/linuxlite emerald InRelease
Greška:11 http://ppa.launchpad.net/noobslab/apps/ubuntu focal Release
  404  Not Found [IP: 91.189.95.85 80]
Čitanje popisa paketa...
E: Repozitorij 'http://ppa.launchpad.net/noobslab/apps/ubuntu focal Release' ne sadrži datoteku izdanja.

Hi, here is my problem. OS recognizes the printer (like 3700 ser.), but does not print/scan (message "Printer may not be connected" in Printer-settings dialog window or Print Queue).
I'm trying to install latest HPLIP from https://developers.hp.com/hp-linux-imagi...g/gethplip, but the process stucks in the phase:

RUNNING HPLIP LIBS COMMANDS
sudo apt-get remove libhpmud0 libsane-hpaio printer-driver-postscript-hp

Anybody have an advice/solution pls??? Thank you! JC

(Acer Aspire 5315, Linux Lite 5.2, printer HP DeskJet Ink Advantage 3775)

Hi,

I am a LL newbie, so maybe I am doing something wrong. Any help would be appreciated.

I have Linux Lite 5.2, multiboot, on my notebook (for specifications please see the end of my post). I am using LL since a few weeks along with Ubuntu 18.04, Debian 10 and 11 and Windows 10. Bootup speed and performance were ok first, but lately booting takes ages, shows a lot of "FAILED" lines until it reaches login; and after that the system freezes occasionally unexpectedly, sometimes so stubborn that <Ctrl>+<Alt>+<F2> has no effect at all and only a hard switch off is a rescue. Generally, the performance during normal use is slower. The other multiboot distros seem to be unaffected (only Win10 has been always slow, anyway).

What could be the reason and could that be amended, please?

Thanks, litecub

My system
********
Machine:  Type: Laptop System: SAMSUNG product: 300E4C/300E5C/300E7C
          Chassis: type: 9 v: 0.1 serial: <filter>
CPU:      Topology: Dual Core model: Intel Core i3-2328M bits: 64 type: MT MCP
Graphics:  Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
          resolution: 1366x768~60Hz
Network:  Device-1: Qualcomm Atheros AR9485 Wireless Network Adapter
Drives:    Local Storage: total: 465.76 GiB used: 8.45 GiB (1.8%)
          ID-1: /dev/sda vendor: Seagate model: ST500LM012 HN-M500MBB size: 465.76 GiB

Partition: ID-1: / raw size: 30.06 GiB size: 29.46 GiB (98.01%) used: 8.45 GiB (28.7%) fs: ext4
          dev: /dev/sda10
          ID-2: swap-1 size: 7.51 GiB used:  /dev/sda2

P.S. I detected the "FAILED" lines after changing GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="" in /etc/default/grub.

P.P.S. Neither the Preview button nor "shift+alt+p" to preview have any effect on my forum thread

Would like to see available updates listed after requesting them.  Then require signin if one wants to install them.  Now I need to authenticate before even seeing if any are available and sometimes there are none.  Makes for a wasted login.  I do have notifications for this enabled, but the lowest I could set it for is 1 hour and I might miss the notification.

Thanks

Had to use this old laptop today and couldn't update 4.4



============ Log ===========

Hit:1 http://repo.linuxliteos.com/linuxlite diamond InRelease
Hit:2 http://archive.canonical.com/ubuntu bionic InRelease
Hit:3 http://us.archive.ubuntu.com/ubuntu bionic InRelease
Get:5 http://us.archive.ubuntu.com/ubuntu bionic-security InRelease [88.7 kB]
Hit:6 http://ppa.launchpad.net/teejee2008/ppa/ubuntu bionic InRelease
Get:7 http://us.archive.ubuntu.com/ubuntu bionic-updates InRelease [88.7 kB]
Get:4 http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu bionic InRelease [15.4 kB]
Get:8 http://us.archive.ubuntu.com/ubuntu bionic-backports InRelease [74.6 kB]
Hit:9 https://repo.nordvpn.com/deb/nordvpn/debian stable InRelease
Reading package lists...
E: Repository 'http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu bionic InRelease' changed its 'Label' value from 'gimp' to 'gimp stable'

A HUGE thank you to all that donated towards this rig. I don't know how long it's been since I've had a new PC, but I felt left behind and wasn't taking advantage of all the new technologies that will make me significantly more productive: Here it is:

Case - Corsair 4000D White ATX MidTower Gaming Case Tempered Glass, CPU Cooler Supports Upto 170mm, Graphs Card Supports Upto 360mm, 7+2(Vertical) PCI Slot, 360 Rad Supported, Front: 1X USB, 1X Type C, HD Audio



Motherboard - Gigabyte Z490 AORUS ULTRA ATX Form Factor, For Intel 10th Gen LGA1200, Z490, 3XM.2, 4X DDR4 Dimm, Back I/O: 9X USB, 1XType C, HDMI, Lan, Wifi AX+BT, HD Audio, Internal I/O: 1XUSB 3.2, 2X USB 2.0, 1X Type C, 2X 12V RGB Header, 2X 5V A-RGB



CPU - Intel Comet Lake Core i9 10850K 10 Core up to 5.2Ghz . LGA 1200, 10 Core/ 20 Threads, WITHOUT Cooler , 125W



CPU Cooler - Cooler Master Hyper 212 Turbo WHITE Edition CPU Cooler 2x120mm fan For Intel LGA 2066 / 2011-v3 / 2011/1200 /1151 / 1150 / 1155 / 1156 / 1366, AMD AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1



Memory - G.SKILL Ripjaws V Series Black 32GB DDR4 Desktop Memory 3200Mhz (2 x 16GB) 16GB RAM CL16 1.35v F4-3200C16D-32GVK 16-18-18-38



NVME1 - Samsung 980 Pro 500GB NVMe PCIE 4.0 SSD Up to 6,900 MB/s Read, up to 5,000MB/s Write , 5 Years Warranty



NVME2 - Samsung 980 Pro 1TB NVMe PCIe 4.0 M.2 SSD Read up to 7000MB/s, Write Up to 5000MB/s, 5 Years Warranty



PSU - Gigabyte Aorus AP850GM 850W 80Plus Gold Fully Modular Power Supply 10 Years warranty