Sorry guys to ask but can you help me fix linux lite slow boot times.
Terminal:
systemd-analyze
Startup finished in 5.747s (kernel) + 31.859s (userspace) = 37.606s
graphical.target reached after 31.809s in userspace
systemd-analyze blame
15.113s networking.service
11.583s blueman-mechanism.service
9.372s NetworkManager-wait-online.service
8.641s accounts-daemon.service
8.518s networkd-dispatcher.service
6.577s udisks2.service
5.933s grub-common.service
5.321s dev-sda2.device
4.941s systemd-udev-settle.service
4.906s gpu-manager.service
4.845s NetworkManager.service
4.645s polkit.service
4.215s thermald.service
4.115s systemd-journal-flush.service
3.732s systemd-resolved.service
3.693s lightdm.service
3.679s plymouth-quit-wait.service
3.161s systemd-logind.service
2.965s ModemManager.service
2.732s avahi-daemon.service
2.397s wpa_supplicant.service
2.280s zfs-load-module.service
2.062s nmbd.service
1.754s apparmor.service
1.631s systemd-tmpfiles-setup.service
1.456s rsyslog.service
1.323s systemd-networkd.service
1.161s systemd-udevd.service
933ms systemd-modules-load.service
863ms smbd.service
683ms lm-sensors.service
657ms ubiquity.service
588ms e2scrub_reap.service
557ms systemd-tmpfiles-setup-dev.service
532ms grub-initrd-fallback.service
495ms systemd-udev-trigger.service
491ms keyboard-setup.service
483ms systemd-random-seed.service
463ms systemd-sysctl.service
418ms systemd-fsck@dev-disk-by\x2duuid-58C4\x2dFA1E.service
366ms alsa-restore.service
364ms upower.service
332ms systemd-sysusers.service
317ms swapfile.swap
251ms ntp.service
236ms boot-efi.mount
224ms systemd-journald.service
200ms dev-hugepages.mount
199ms dev-mqueue.mount
199ms sys-kernel-debug.mount
198ms sys-kernel-tracing.mount
196ms blk-availability.service
194ms kmod-static-nodes.service
194ms lvm2-monitor.service
165ms zfs-volume-wait.service
141ms [email protected]
138ms zfs-mount.service
124ms systemd-remount-fs.service
70ms systemd-tmpfiles-clean.service
57ms setvtrgb.service
47ms dns-clean.service
46ms pppd-dns.service
43ms ifupdown-pre.service
40ms rtkit-daemon.service
39ms console-setup.service
38ms zfs-share.service
37ms systemd-user-sessions.service
36ms hddtemp.service
25ms systemd-networkd-wait-online.service
21ms [email protected]
20ms resolvconf-pull-resolved.service
17ms finalrd.service
15ms plymouth-start.service
12ms plymouth-read-write.service
9ms systemd-update-utmp.service
7ms openvpn.service
7ms systemd-update-utmp-runlevel.service
4ms sys-kernel-config.mount
3ms sys-fs-fuse-connections.mount
plz help.
===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into a new or existing thread for assistance.
============ Log ===========
Ign:1 cdrom://Linux Lite 5.4 - Release amd64 dists/ InRelease
Ign:2 cdrom://Linux 20.04 - Release amd64 dists/ InRelease
Err:3 cdrom://Linux Lite 5.4 - Release amd64 dists/ Release
Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Err:4 cdrom://Linux 20.04 - Release amd64 dists/ Release
Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
Hit:5 http://archive.ubuntu.com/ubuntu focal InRelease
Hit:6 http://archive.canonical.com/ubuntu focal InRelease
Hit:7 http://repo.linuxliteos.com/linuxlite emerald InRelease
Hit:8 http://archive.ubuntu.com/ubuntu focal-backports InRelease
Hit:9 http://archive.ubuntu.com/ubuntu focal-security InRelease
Get:10 http://archive.ubuntu.com/ubuntu focal-updates InRelease [114 kB]
Get:11 http://archive.ubuntu.com/ubuntu focal-updates/main i386 Packages [470 kB]
Get:12 http://archive.ubuntu.com/ubuntu focal-updates/main amd64 Packages [974 kB]
Get:13 http://archive.ubuntu.com/ubuntu focal-updates/main Translation-en [221 kB]
Get:14 http://archive.ubuntu.com/ubuntu focal-updates/main amd64 c-n-f Metadata [13.2 kB]
Get:15 http://archive.ubuntu.com/ubuntu focal-updates/restricted amd64 Packages [220 kB]
Get:16 http://archive.ubuntu.com/ubuntu focal-updates/restricted i386 Packages [16.3 kB]
Get:17 http://archive.ubuntu.com/ubuntu focal-updates/restricted Translation-en [32.5 kB]
Get:18 http://archive.ubuntu.com/ubuntu focal-updates/restricted amd64 c-n-f Metadata [436 B]havehave
Get:19 http://archive.ubuntu.com/ubuntu focal-updates/universe i386 Packages [571 kB]
Get:20 http://archive.ubuntu.com/ubuntu focal-updates/universe amd64 Packages [772 kB]
Get:21 http://archive.ubuntu.com/ubuntu focal-updates/universe Translation-en [166 kB]havehavehave
Get:22 http://archive.ubuntu.com/ubuntu focal-updates/universe amd64 c-n-f Metadata [17.3 kB]
Get:23 http://archive.ubuntu.com/ubuntu focal-updates/multiverse amd64 Packages [21.7 kB]
Get:24 http://archive.ubuntu.com/ubuntu focal-updates/multiverse i386 Packages [6,128 B]
Get:25 http://archive.ubuntu.com/ubuntu focal-updates/multiverse Translation-en [5,508 B]
Get:26 http://archive.ubuntu.com/ubuntu focal-updates/multiverse amd64 c-n-f Metadata [600 B]
Reading package lists...
E: The repository 'cdrom://Linux Lite 5.4 - Release amd64 dists/ Release' does not have a Release file.
E: The repository 'cdrom://Linux 20.04 - Release amd64 dists/ Release' does not have a Release file.
sudo apt install code
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package code
I don't know why vs code isn't installing
Note :I just installed linux lite as my first ever linux distro and i wanted to use it to learnto code and then contribute to open source projects (like: Linux lite and other linux distros + emulators).
ANd i'm completely new to linux even thoughit's my favourite OS and i even watch dozens of linux related youtube videos.
Plz i'm asking help from the wonderful community of Linux lite and LINUX in general.
TL;DR: Wifi hotspot on PC disconnects when phone tries to connect to it.
New to Wifi. I bought the following wifi network adapter to make my PC a hotspot for my new smart phone to connect to:
![[Image: 14931641.png]](https://multimedia.bbycastatic.ca/multimedia/products/1500x1500/149/14931/14931641.png)
I could finally make it work by installing the driver from kelebek333 (from the PPA repo).
I created a wifi connection with a method similar to this one. (The IPv4 & IPv6 settings are set to 'shared to other computers')
I can activate the connection successfully, but as soon as I turn the phone on and it tries to connect to the wifi signal, the PC connection drops. Sometimes, it can last for a few seconds, just enough to download some notifications. Sometimes it drops by itself, but I think it is because some of my neighbors' machines try to connect to my wifi signal.
What could be the problem? The driver? The hardware itself? Wrong set-up? Some info about my system:
inxi -FNSystem:
Host: maison Kernel: 5.4.0-72-generic x86_64 bits: 64 Desktop: Xfce 4.14.2
Distro: Linux Lite 5.0 LTS
Machine:
Type: Desktop Mobo: Micro-Star model: B450M PRO-M2 (MS-7B84) v: 1.0
serial: <superuser/root required> UEFI: American Megatrends v: 2.E3
date: 06/11/2020
CPU:
Topology: Quad Core model: AMD Ryzen 3 2200G with Radeon Vega Graphics
bits: 64 type: MCP L2 cache: 2048 KiB
Speed: 1520 MHz min/max: 1600/3500 MHz Core speeds (MHz): 1: 1423 2: 1432
3: 1467 4: 1418
Graphics:
Device-1: AMD Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series]
driver: amdgpu v: kernel
Display: x11 server: X.Org 1.20.9 driver: amdgpu,ati
unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
OpenGL: renderer: AMD RAVEN (DRM 3.35.0 5.4.0-72-generic LLVM 11.0.0)
v: 4.6 Mesa 20.2.6
Audio:
Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel
Device-2: AMD Family 17h HD Audio driver: snd_hda_intel
Sound Server: ALSA v: k5.4.0-72-generic
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169
IF: enp37s0 state: up speed: 100 Mbps duplex: full mac: 30:9c:23:d6:6c:6b
Device-2: Realtek 802.11n type: USB driver: rtl8188fu
IF: wlx1cbfceea0202 state: down mac: 1c:bf:ce:ea:02:02
Drives:
Local Storage: total: 447.13 GiB used: 129.86 GiB (29.0%)
ID-1: /dev/sda vendor: Patriot model: Burst size: 447.13 GiB
Partition:
ID-1: / size: 438.62 GiB used: 129.85 GiB (29.6%) fs: ext4 dev: /dev/sda2
Sensors:
System Temperatures: cpu: 26.8 C mobo: N/A gpu: amdgpu temp: 26 C
Fan Speeds (RPM): N/A
Info:
Processes: 255 Uptime: 45m Memory: 13.68 GiB used: 2.15 GiB (15.7%)
Shell: bash inxi: 3.0.38rfkill list all1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: no
Hello,
I have just installed a FRESH copy of Linux Lite 5.4 on my laptop. I loved the live USB system so decided to give it a go.
To my dismay this is what I booted into on my first boot (see attached pictures). What is this? I don't remember being asked for a raw Xfce desktop with nothing there. How can I fix this without reinstalling again? If this can't be fixed, Linux Lite is useless for me and I will need to look for another distro. What about those google ads in Firefox that cannot be closed? This surely is weird.
I'm a 16 year + Linux user and never in my life have I had something like that happen on a fresh installation. Can anyone offer suggestions on what went wrong? Thanks.
I can't even attach a photo in this forum.
![[Image: Screenshot-2021-05-09-15-30-38.png]](https://i.ibb.co/qBthFpb/Screenshot-2021-05-09-15-30-38.png)
![[Image: Screenshot-2021-05-09-15-39-55.png]](https://i.ibb.co/p2spZG2/Screenshot-2021-05-09-15-39-55.png)
I enabled the Lite Widget on the 5.4 release but it is displayed almost entirely off-screen. Here is a picture of what is happening.
![[Image: lite-widget.png]](https://i.postimg.cc/BnjNvsn2/lite-widget.png)
What should I do to get the widget readjusted on-screen?
Also, how would I move the widget to the second monitor?
I installed a fresh copy of Linux Lite 5.4 since I was installing a new graphics card (NVIDIA GTX 1070).
I use dual monitors which they worked fine in Linux Lite 4.2 which was my old version I used.
But after this new install, the menu panel is on the second monitor instead of the primary monitor.
I can't find out how to move it. Can anyone help please?
*Edit* Now I found it...it was in panel preferences - Output can choose which monitor to put it on.
Rather than me downloading some software and then fighting with it to work, maybe someone here can recommend a program that will work well with my Samsung Laser jet printer/scanner?
I had luck with GSCAN2PDF with LL 4.0 but not with 5.2.
I will probably upgrade to 5.4. Any suggestions? And if so, the best way to download it?
THANKS
Hi,
Today I did an update, Thunderbird was updated.
Then, I realize that the sound is lost, the volume control pops up frequently, whether I check the configuration in the Manual and run alsamixer I have no idea what is happening.
I upload the report of my system in order to recieve any help.
I could see the sound in the audio control panel and also while I run a test in the terminal with the command:
speaker-test -c 2
Regards
Having just upgraded LL3.8 to LL5.2 without any major issues I have come across one very annoying issue. Despite trying everything I know I am no longer able to freely resize the whisker menu panel i.e. it will resize in height only but not in width.
I prefer to have the smallest possible icons withing this menu and the menu looks now ridiculous with loads of wasted white space and the width of the menu taking up a third of the whole screen. I've never experienced this issue in previous versions of LL where I have always been able to resize this window freely.
Can someone please help me resolve this issue or point out where I am going wrong. TIA

