0 Members and 3 Guests are viewing this topic.
Hiya,... Recognises wifi lan but will not join it when password given (unlike previous versions)...
UPDATE - files eventually found in ./etc/skel/Downloads/. Is this intended location for transfers - seems not very obvious - especially to this newbie??
Know not high priority (If at all) but Vivaldi browser also not working after adobe flash plugin actioned.Also slimjet not finding plug ins.
buddy@buddy-Fatman:~$ sudo apt-get install gpodder[sudo] password for buddy: Reading package lists... DoneBuilding dependency tree Reading state information... DoneYou might want to run 'apt-get -f install' to correct these:The following packages have unmet dependencies: gpodder : Depends: python-mygpoclient but it is not going to be installed xfce4-goodies : Depends: xfce4-whiskermenu-plugin but it is not going to be installedE: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).buddy@buddy-Fatman:~$ sudo apt-get -f installReading package lists... DoneBuilding dependency tree Reading state information... DoneCorrecting dependencies... DoneThe following additional packages will be installed: xfce4-whiskermenu-pluginThe following NEW packages will be installed: xfce4-whiskermenu-plugin0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.24 not fully installed or removed.Need to get 0 B/135 kB of archives.After this operation, 642 kB of additional disk space will be used.Do you want to continue? [Y/n] y(Reading database ... 230065 files and directories currently installed.)Preparing to unpack .../xfce4-whiskermenu-plugin_1.5.1-1ubuntu1_amd64.deb ...Unpacking xfce4-whiskermenu-plugin (1.5.1-1ubuntu1) ...dpkg: error processing archive /var/cache/apt/archives/xfce4-whiskermenu-plugin_1.5.1-1ubuntu1_amd64.deb (--unpack): trying to overwrite '/usr/share/xfce4/panel/plugins/whiskermenu.desktop', which is also in package whiskermenu 1.5.2.1-linuxlitedpkg-deb: error: subprocess paste was killed by signal (Broken pipe)Errors were encountered while processing: /var/cache/apt/archives/xfce4-whiskermenu-plugin_1.5.1-1ubuntu1_amd64.debE: Sub-process /usr/bin/dpkg returned an error code (1)buddy@buddy-Fatman:~$
E: /var/cache/apt/archives/xfce4-whiskermenu-plugin_1.5.1-1ubuntu1_amd64.deb: trying to overwrite '/usr/share/xfce4/panel/plugins/whiskermenu.desktop', which is also in package whiskermenu 1.5.2.1-linuxlite
@firenice03 Please set light-locker to lock the session “When the screensaver is deactivated” and test again.Replace the contents /usr/share/light-locker-settings/light-locker-settings/light-locker-settings.py first with this:Code: [Select]#!/usr/bin/python# -*- Mode: Python; coding: utf-8; indent-tabs-mode: nil; tab-width: 4 -*-# Light Locker Settings - simple configuration tool for light-locker# Copyright (C) 2014 Thomas Molloy <[email protected]>## This program is free software: you can redistribute it and/or modify it# under the terms of the GNU General Public License version 3, as published# by the Free Software Foundation.## This program is distributed in the hope that it will be useful, but# WITHOUT ANY WARRANTY; without even the implied warranties of# MERCHANTABILITY, SATISFACTORY QUALITY, or FITNESS FOR A PARTICULAR# PURPOSE. See the GNU General Public License for more details.## You should have received a copy of the GNU General Public License along# with this program. If not, see <http://www.gnu.org/licenses/>.import gettextgettext.textdomain('light-locker-settings')from gettext import gettext as _from gettext import ngettextimport reimport argparseimport shleximport osimport subprocessfrom gi.repository import Gtk, GLib, Gioimport psutilold_psutil_format = isinstance(psutil.Process.username, property)import light_locker_xfsync''' Settings window for the light-locker '''username = GLib.get_user_name()screensaver_managers = { 'xfce4-power-manager': (_("Xfce Power Manager"), "xfce4-power-manager -c")}class LightLockerSettings: '''Light Locker Settings application class.''' def __init__(self): '''Initialize the Light Locker Settings application.''' self.light_locker_keyfile = None self.screensaver_keyfile = None self.builder = Gtk.Builder() self.builder.set_translation_domain ('light-locker-settings') script_dir = os.path.dirname(os.path.abspath(__file__)) glade_file = os.path.join(script_dir, "light-locker-settings.glade") self.builder.add_from_file(glade_file) self.builder.connect_signals(self) self.window = self.builder.get_object("light_locker_settings_window") self.window.set_title(_("Light Locker Settings")) ''' Set background-color of frame to base-color to make it resemble the XfceHeading widget ''' self.xfce_header = self.builder.get_object("xfce_header") entry = Gtk.Entry.new() style = entry.get_style_context() base_color = style.lookup_color("theme_base_color") self.xfce_header.override_background_color(0, base_color[1]) fg_color = style.lookup_color("theme_fg_color") self.xfce_header.override_color(0, fg_color[1]) self.use_lightlocker = self.builder.get_object("use_lightlocker") self.session_lock_combo = self.builder.get_object("session_lock_combo") self.lock_on_suspend = self.builder.get_object("lock_on_suspend") self.apply = self.builder.get_object("apply") ''' Set up scales ''' self.screenblank_timeout = self.builder.get_object( "screenblank_timeout") self.screenblank_timeout.add_mark(1, 3, None) self.screenoff_timeout = self.builder.get_object("screenoff_timeout") self.screenoff_timeout.add_mark(1, 3, None) self.lock_delay = self.builder.get_object("lock_delay") self.lock_delay.add_mark(0, 3, None) for i in range(1, 13): self.screenblank_timeout.add_mark(i * 10, 3, None) self.screenoff_timeout.add_mark(i * 10, 3, None) self.lock_delay.add_mark(i * 10, 3, None) self.screensaver_managed = False self.gsettings_init() self.init_settings() ''' Monitor changes to the settings ''' self.apply.set_sensitive(False) self.locksettings_changed = False self.screenblank_timeout.connect( "value-changed", self.screenblank_value_changed_cb) self.screenoff_timeout.connect( "value-changed", self.screenoff_value_changed_cb) self.lock_delay.connect( "value-changed", self.lock_delay_value_changed_cb) self.window.show()# Application Callbacks def screenblank_value_changed_cb(self, gparam): '''Sync screenblank and screenoff settings when values are modified.''' self.apply.set_sensitive(True) blank_timeout = int(self.screenblank_timeout.get_value()) off_timeout = int(self.screenoff_timeout.get_value()) ''' screenoff can never be shorter than screenblank-timeout ''' if (blank_timeout >= off_timeout) and (off_timeout != 0): self.screenoff_timeout.set_value(blank_timeout) def screenoff_value_changed_cb(self, gparam): '''Sync screenblank and screenoff settings when values are modified.''' self.apply.set_sensitive(True) blank_timeout = int(self.screenblank_timeout.get_value()) off_timeout = int(self.screenoff_timeout.get_value()) ''' screenoff can never be shorter than screenblank-timeout ''' if off_timeout <= blank_timeout: self.screenblank_timeout.set_value(off_timeout) def use_lightlocker_cb(self, switch, gparam): '''Update the displayed lock controls when light-locker is enabled or disabled.''' ''' if on then allow for the timeout to be set ''' self.locksettings_changed = True self.apply.set_sensitive(True) if switch.get_active(): self.lock_delay.set_sensitive(False) self.session_lock_combo.set_sensitive(False) self.lock_on_suspend.set_sensitive(False) else: self.session_lock_combo.set_sensitive(True) self.lock_on_suspend.set_sensitive(True) if self.session_lock_combo.get_active() != 2: self.lock_delay.set_sensitive(True) def on_session_lock_combo_changed(self, widget): '''Update the displayed screen blanking controls when locking is enabled or disabled.''' self.locksettings_changed = True self.apply.set_sensitive(True) # Check the session lock combo: # 0. lock when screensaver is activated # 1. lock when screensaver is deactivated # 2. never lock active = widget.get_active() self.lock_delay.set_sensitive(active != 2) def lock_delay_value_changed_cb(self, gparam): '''Enable saving of lock setting when the delay has been modified.''' self.locksettings_changed = True self.apply.set_sensitive(True) def lock_on_suspend_cb(self, widget, gparam): '''Enable saving when locking on suspend is changed.''' self.locksettings_changed = True self.apply.set_sensitive(True) def apply_cb(self, button, data=None): '''Apply changes and update the relevant setting files.''' self.apply_settings() self.apply.set_sensitive(False) def on_window_destroy(self, *args): '''Exit the application when the window is closed.''' Gtk.main_quit() def on_close_clicked(self, *args): '''Exit the application when the window is closed.''' Gtk.main_quit()# Process Management def get_process_username(self, process): """Return the username of the process owner.""" p_user = None try: if old_psutil_format: p_user = process.username else: p_user = process.username() except: pass return p_user def get_process_name(self, process): """Return the name of the running process.""" p_name = None try: if old_psutil_format: p_name = os.path.basename(process.exe) else: p_name = os.path.basename(process.exe()) except: pass return p_name def check_running_process(self, process_name): """Return True if the specified process is active.""" # Find the process... for pid in psutil.pids(): try: p = psutil.Process(pid) if self.get_process_username(p) == username: # Return True if the process is found. if self.get_process_name(p) == process_name: return True except: pass return False def stop_light_locker(self): """Safely stop the light-locker process.""" # Find the process... for pid in psutil.pids(): try: p = psutil.Process(pid) if self.get_process_username(p) == username: # When found, end the light-locker process. if self.get_process_name(p) == 'light-locker': p.terminate() except: pass def run_command(self, cmd, check_output=False): '''Run a shell command, return its output.''' if len(cmd) == 0: return None if check_output: output = subprocess.check_output(cmd, shell=True) if not isinstance(output, str): output = output.decode('utf-8') return output else: subprocess.Popen(cmd.split(" ")) return None def run_command_cb(self, widget, cmd): self.run_command(cmd, False)# Light Locker 1.5.1 def gsettings_init(self): self.gsettings = None schema_source = Gio.SettingsSchemaSource.get_default() if (schema_source.lookup('apps.light-locker', False)): self.gsettings = Gio.Settings.new('apps.light-locker') def gsettings_available(self): return self.gsettings is not None def gsettings_get_settings(self): lock_after_screensaver = self.gsettings.get_uint('lock-after-screensaver') late_locking = self.gsettings.get_boolean('late-locking') lock_on_suspend = self.gsettings.get_boolean('lock-on-suspend') settings = dict() settings['light-locker-enabled'] = self.get_light_locker_enabled() settings['lock-after-screensaver'] = lock_after_screensaver > 0 settings['late-locking'] = late_locking settings['lock-on-suspend'] = lock_on_suspend settings['lock-time'] = \ self.light_locker_time_down_scaler(lock_after_screensaver) return settings def gsettings_set_enabled(self, enable): if enable: light_locker_exec = "light-locker" else: light_locker_exec = "" keyfile = self.get_light_locker_autostart() keyfile.set_value("Desktop Entry", "Exec", light_locker_exec) self.save_light_locker_autostart() def gsettings_set_late_locking(self, enable): self.gsettings.set_boolean("late-locking", enable) def gsettings_set_lock_after_screensaver(self, value): self.gsettings.set_uint("lock-after-screensaver", value) def gsettings_set_lock_on_suspend(self, enable): self.gsettings.set_boolean("lock-on-suspend", enable)# Key Files def ll_keyfile_get_settings(self): # Defaults settings = { 'light-locker-enabled': False, 'lock-after-screensaver': False, 'late-locking': False, 'lock-on-suspend': False, 'lock-time': 10 } keyfile = self.get_light_locker_autostart() if self.get_light_locker_enabled(): settings['light-locker-enabled'] = True ll_exec = keyfile.get_value("Desktop Entry", "Exec"); value = ll_exec.replace("=", " ") splitArgs = shlex.split(value) parser = argparse.ArgumentParser( description='Light Locker Settings') parser.add_argument("--lock-after-screensaver") parser.add_argument("--late-locking", action='store_true') parser.add_argument("--lock-on-suspend", action='store_true') (args, others) = parser.parse_known_args(splitArgs) # Lock after screensaver if args.lock_after_screensaver: if int(args.lock_after_screensaver) != 0: settings['lock-after-screensaver'] = True settings['lock-time'] = self.light_locker_time_down_scaler( int(args.lock_after_screensaver)) # Late Locking if args.late_locking: settings['late-locking'] = True # Lock on Suspend if args.lock_on_suspend: settings['lock-on-suspend'] = True return settings def get_autostart(self, filename, defaults={}): autostart = os.path.join(GLib.get_user_config_dir(), 'autostart') if not os.path.exists(autostart): os.makedirs(autostart) keyfile = GLib.KeyFile.new() dirs = [] dirs.append (autostart) for directory in (GLib.get_system_config_dirs()): dirs.append (os.path.join(directory, 'autostart')) keyfile.load_from_dirs(filename, dirs, GLib.KeyFileFlags.KEEP_TRANSLATIONS) for key in defaults.keys(): try: if keyfile.get_value("Desktop Entry", key) is None: keyfile.set_value("Desktop Entry", key, defaults[key]) except GLib.Error: keyfile.set_value("Desktop Entry", key, defaults[key]) return keyfile def get_light_locker_autostart(self): if self.light_locker_keyfile is not None: return self.light_locker_keyfile defaults = { "Type": "Application", "Name": _("Screen Locker"), "Comment": _("Launch screen locker program"), "Icon": "preferences-desktop-screensaver", "NoDisplay": "true", "NotShownIn": "Gnome;Unity", "Exec": "" } self.light_locker_keyfile = \ self.get_autostart('light-locker.desktop', defaults) return self.light_locker_keyfile def get_screensaver_autostart(self): if self.screensaver_keyfile is not None: return self.screensaver_keyfile defaults = { "Type": "Application", "Name": _("Screensaver"), "Comment": _("Set screensaver timeouts"), "Exec": "" } self.screensaver_keyfile = \ self.get_autostart('screensaver-settings.desktop', defaults) return self.screensaver_keyfile def save_light_locker_autostart(self): filename = os.path.join(GLib.get_user_config_dir(), 'autostart', 'light-locker.desktop') autostart = self.get_light_locker_autostart() autostart.save_to_file(filename) def save_screensaver_autostart(self): filename = os.path.join(GLib.get_user_config_dir(), 'autostart', 'screensaver-settings.desktop') autostart = self.get_screensaver_autostart() autostart.save_to_file(filename)# Settings Parsing def use_screensaver_manager(self, name, command): """Replace the Screensaver settings with a different application.""" self.screensaver_managed = True infobar = self.builder.get_object("screensaver_info") infobar_label = self.builder.get_object("screensaver_info_label") infobar_button = self.builder.get_object("screensaver_info_button") screensaver_frame = self.builder.get_object("screensaver_details") # Light Locker Settings is *NOT* controlling the screensaver. filename = os.path.join(GLib.get_user_config_dir(), 'autostart', 'screensaver-settings.desktop') if os.path.isfile(filename): os.remove(filename) screensaver_frame.hide() # Update the InfoBar infobar_label.set_label( _("Your screensaver settings are managed by %s.") % name) infobar_button.connect("clicked", self.run_command_cb, command) infobar.show() def init_settings(self): if self.gsettings_available(): settings = self.gsettings_get_settings() ll_exec_settings = self.ll_keyfile_get_settings() if ll_exec_settings['lock-after-screensaver']: settings['lock-after-screensaver'] = True if ll_exec_settings['late-locking']: settings['late-locking'] = True if ll_exec_settings['lock-on-suspend']: settings['lock-on-suspend'] = True if ll_exec_settings['lock-time'] != 10: settings['lock-time'] = ll_exec_settings['lock-time'] else: settings = self.ll_keyfile_get_settings() # Replace settings with xfce4-power-manager if self.check_running_process("xfce4-power-manager"): xfpm_sync = light_locker_xfsync.XfpmSync() settings['lock-on-suspend'] = xfpm_sync.get_lock() # Check if any known screensaver managers are currently running. for process_name in screensaver_managers.keys(): if self.check_running_process(process_name): name, command = screensaver_managers[process_name] self.use_screensaver_manager(name, command) break # Extract the settings use_light_locker = settings['light-locker-enabled'] lock_after_screensaver = settings['lock-after-screensaver'] late_locking = settings['late-locking'] lock_on_suspend = settings['lock-on-suspend'] lock_time = settings['lock-time'] screen_blank_timeout, screen_off_timeout = \ self.get_screen_blank_timeout() # Apply the settings self.use_lightlocker.set_active(use_light_locker) self.session_lock_combo.set_sensitive(use_light_locker) self.lock_on_suspend.set_sensitive(use_light_locker) self.lock_delay.set_value(lock_time) if lock_after_screensaver: self.lock_delay.set_sensitive(True) if late_locking: self.session_lock_combo.set_active(1) else: self.session_lock_combo.set_active(0) else: self.lock_delay.set_sensitive(False) self.session_lock_combo.set_active(2) self.lock_on_suspend.set_active(lock_on_suspend) blank = self.light_locker_time_down_scaler(screen_blank_timeout) off = self.light_locker_time_down_scaler(screen_off_timeout) self.screenblank_timeout.set_value(blank) self.screenoff_timeout.set_value(off) def get_light_locker_enabled(self): keyfile = self.get_light_locker_autostart() ll_exec = keyfile.get_value("Desktop Entry", "Exec") return "light-locker" in ll_exec def get_screen_blank_timeout(self): ''' read in the X11 screensaver settings from bash ''' # Defaults screen_blank = 10 screen_off = 15 # Get the xset output to parse. screensaver_output = self.run_command('xset q', check_output=True) # Get the Screen-Blank timeout screenblank_timeout_grep = re.search( "timeout: *(\d+)", screensaver_output) if screenblank_timeout_grep: screenblank_timeout = re.findall( '\d+', screenblank_timeout_grep.group(1)) screen_blank = int(screenblank_timeout[0]) / 60 # Get the Screen-Off timeout screenoff_timeout_grep = re.search( "Standby: *(\d+)", screensaver_output) if screenoff_timeout_grep: screenoff_timeout = re.findall( '\d+', screenoff_timeout_grep.group(1)) screen_off = int(screenoff_timeout[0]) / 60 # Return the current timeout settings return screen_blank, screen_off# Label Formatters def screensaver_label_formatter(self, screenblank_timeout, max_value): '''Convert timeout values to a more friendly format.''' value = int(screenblank_timeout.get_value()) if value == 0: return _("Never") else: return ngettext("%d minute", "%d minutes", value) % (value,) def light_locker_label_formatter(self, light_locker_slider, max_value): '''Convert timeout values to a more friendly format.''' value = int(light_locker_slider.get_value()) if value == 0: formatted_string = _("Never") else: value = self.light_locker_time_up_scaler(value) formatted_string = self.secs_to_readable(value) return formatted_string def secs_to_readable(self, seconds): '''Convert seconds to a more friendly format.''' if seconds >= 60: minutes = seconds / 60 return ngettext("%d minute", "%d minutes", minutes) % (minutes,) else: return ngettext("%d second", "%d seconds", seconds) % (seconds,)# Time Scalers def light_locker_time_up_scaler(self, time): '''Scale times up.''' if time > 60: time = (time - 60) * 60 return time def light_locker_time_down_scaler(self, time): '''Scale times down.''' if time > 60: time = time / 60 + 60 return time# Settings Writing def get_updated_settings(self): """Return a dictionary with the updated settings from the GUI.""" # Get the lock-after-screensaver timeout. session_lock = self.session_lock_combo.get_active() if session_lock == 2: # never lock with screensaver late_locking = False lock_delay = 0 else: if session_lock == 0: # lock when screensaver is activated late_locking = False if session_lock == 1: # lock when screensaver is deactivated late_locking = True lock_delay = self.light_locker_time_up_scaler( int(self.lock_delay.get_value())) # Lock Enabled? lock_enabled = self.use_lightlocker.get_active() # Get the suspend setting. lock_on_suspend = self.lock_on_suspend.get_active() # Get the screen-blank and screen-off timeout. screenblank_timeout = \ int(self.screenblank_timeout.get_value()) * 60 screenoff_timeout = int(self.screenoff_timeout.get_value()) * 60 settings = { "lock-enabled": lock_enabled, "late-locking": late_locking, "lock-after-screensaver": lock_delay, "lock-on-suspend": lock_on_suspend, "screen-blank-timeout": screenblank_timeout, "screen-off-timeout": screenoff_timeout } return settings def apply_settings(self): """Apply updated settings.""" # Get the current settings from the GUI. settings = self.get_updated_settings() lock_on_suspend = settings['lock-on-suspend'] # If xfce4-sesssion is running, sync the lock-on-suspend setting. if self.check_running_process("xfce4-session"): session_sync = light_locker_xfsync.XfceSessionSync() session_sync.set_lock(lock_on_suspend) # If xfpm manages locking, disable it for light-locker. if self.check_running_process("xfce4-power-manager"): xfpm_sync = light_locker_xfsync.XfpmSync() xfpm_sync.set_lock(lock_on_suspend) # Apply the remaining settings to light-locker. self.apply_light_locker_settings(settings) if not self.screensaver_managed: self.apply_screen_blank_settings(settings) def apply_light_locker_settings(self, settings): '''Apply the light-locker settings''' lock_enabled = settings['lock-enabled'] late_locking = settings['late-locking'] lock_on_suspend = settings['lock-on-suspend'] lock_after_screensaver = settings['lock-after-screensaver'] # If GSettings is available, prefer the following method. if self.gsettings_available(): self.gsettings_set_enabled(lock_enabled) self.gsettings_set_late_locking(late_locking) self.gsettings_set_lock_after_screensaver(lock_after_screensaver) self.gsettings_set_lock_on_suspend(lock_on_suspend) return # Else, proceed with the legacy code below # Stop any running light-locker processes. self.stop_light_locker() if late_locking: late_locking = "--late-locking" else: late_locking = "--no-late-locking" if lock_on_suspend: lock_on_suspend = "--lock-on-suspend" else: lock_on_suspend = "--no-lock-on-suspend" lock_after_screensaver = "--lock-after-screensaver=%i" % \ lock_after_screensaver # Build the light-locker command. light_locker_exec = "" if lock_enabled: light_locker_exec = \ "light-locker %s %s %s" % (lock_after_screensaver, lock_on_suspend, late_locking) # Save the light-locker autostart file. keyfile = self.get_light_locker_autostart() keyfile.set_value("Desktop Entry", "Exec", light_locker_exec) self.save_light_locker_autostart() # Execute the updated light-locker command. self.run_command(light_locker_exec) def apply_screen_blank_settings(self, settings): '''Apply the screen blank settings.''' screenblank_timeout = settings['screen-blank-timeout'] screenoff_timeout = settings['screen-off-timeout'] # Build the screen-blank/off command. screensaver_exec = \ "xset s %i dpms %i 0 0" % (screenblank_timeout, screenoff_timeout) # Execute the updated screensaver command. self.run_command(screensaver_exec) # Save the screensaver autostart file. keyfile = self.get_screensaver_autostart() keyfile.set_value("Desktop Entry", "Exec", screensaver_exec) self.save_screensaver_autostart()if __name__ == "__main__": main = LightLockerSettings() Gtk.main()Run from the terminal:Code: [Select]light-locker-settings
#!/usr/bin/python# -*- Mode: Python; coding: utf-8; indent-tabs-mode: nil; tab-width: 4 -*-# Light Locker Settings - simple configuration tool for light-locker# Copyright (C) 2014 Thomas Molloy <[email protected]>## This program is free software: you can redistribute it and/or modify it# under the terms of the GNU General Public License version 3, as published# by the Free Software Foundation.## This program is distributed in the hope that it will be useful, but# WITHOUT ANY WARRANTY; without even the implied warranties of# MERCHANTABILITY, SATISFACTORY QUALITY, or FITNESS FOR A PARTICULAR# PURPOSE. See the GNU General Public License for more details.## You should have received a copy of the GNU General Public License along# with this program. If not, see <http://www.gnu.org/licenses/>.import gettextgettext.textdomain('light-locker-settings')from gettext import gettext as _from gettext import ngettextimport reimport argparseimport shleximport osimport subprocessfrom gi.repository import Gtk, GLib, Gioimport psutilold_psutil_format = isinstance(psutil.Process.username, property)import light_locker_xfsync''' Settings window for the light-locker '''username = GLib.get_user_name()screensaver_managers = { 'xfce4-power-manager': (_("Xfce Power Manager"), "xfce4-power-manager -c")}class LightLockerSettings: '''Light Locker Settings application class.''' def __init__(self): '''Initialize the Light Locker Settings application.''' self.light_locker_keyfile = None self.screensaver_keyfile = None self.builder = Gtk.Builder() self.builder.set_translation_domain ('light-locker-settings') script_dir = os.path.dirname(os.path.abspath(__file__)) glade_file = os.path.join(script_dir, "light-locker-settings.glade") self.builder.add_from_file(glade_file) self.builder.connect_signals(self) self.window = self.builder.get_object("light_locker_settings_window") self.window.set_title(_("Light Locker Settings")) ''' Set background-color of frame to base-color to make it resemble the XfceHeading widget ''' self.xfce_header = self.builder.get_object("xfce_header") entry = Gtk.Entry.new() style = entry.get_style_context() base_color = style.lookup_color("theme_base_color") self.xfce_header.override_background_color(0, base_color[1]) fg_color = style.lookup_color("theme_fg_color") self.xfce_header.override_color(0, fg_color[1]) self.use_lightlocker = self.builder.get_object("use_lightlocker") self.session_lock_combo = self.builder.get_object("session_lock_combo") self.lock_on_suspend = self.builder.get_object("lock_on_suspend") self.apply = self.builder.get_object("apply") ''' Set up scales ''' self.screenblank_timeout = self.builder.get_object( "screenblank_timeout") self.screenblank_timeout.add_mark(1, 3, None) self.screenoff_timeout = self.builder.get_object("screenoff_timeout") self.screenoff_timeout.add_mark(1, 3, None) self.lock_delay = self.builder.get_object("lock_delay") self.lock_delay.add_mark(0, 3, None) for i in range(1, 13): self.screenblank_timeout.add_mark(i * 10, 3, None) self.screenoff_timeout.add_mark(i * 10, 3, None) self.lock_delay.add_mark(i * 10, 3, None) self.screensaver_managed = False self.gsettings_init() self.init_settings() ''' Monitor changes to the settings ''' self.apply.set_sensitive(False) self.locksettings_changed = False self.screenblank_timeout.connect( "value-changed", self.screenblank_value_changed_cb) self.screenoff_timeout.connect( "value-changed", self.screenoff_value_changed_cb) self.lock_delay.connect( "value-changed", self.lock_delay_value_changed_cb) self.window.show()# Application Callbacks def screenblank_value_changed_cb(self, gparam): '''Sync screenblank and screenoff settings when values are modified.''' self.apply.set_sensitive(True) blank_timeout = int(self.screenblank_timeout.get_value()) off_timeout = int(self.screenoff_timeout.get_value()) ''' screenoff can never be shorter than screenblank-timeout ''' if (blank_timeout >= off_timeout) and (off_timeout != 0): self.screenoff_timeout.set_value(blank_timeout) def screenoff_value_changed_cb(self, gparam): '''Sync screenblank and screenoff settings when values are modified.''' self.apply.set_sensitive(True) blank_timeout = int(self.screenblank_timeout.get_value()) off_timeout = int(self.screenoff_timeout.get_value()) ''' screenoff can never be shorter than screenblank-timeout ''' if off_timeout <= blank_timeout: self.screenblank_timeout.set_value(off_timeout) def use_lightlocker_cb(self, switch, gparam): '''Update the displayed lock controls when light-locker is enabled or disabled.''' ''' if on then allow for the timeout to be set ''' self.locksettings_changed = True self.apply.set_sensitive(True) if switch.get_active(): self.lock_delay.set_sensitive(False) self.session_lock_combo.set_sensitive(False) self.lock_on_suspend.set_sensitive(False) else: self.session_lock_combo.set_sensitive(True) self.lock_on_suspend.set_sensitive(True) if self.session_lock_combo.get_active() != 2: self.lock_delay.set_sensitive(True) def on_session_lock_combo_changed(self, widget): '''Update the displayed screen blanking controls when locking is enabled or disabled.''' self.locksettings_changed = True self.apply.set_sensitive(True) # Check the session lock combo: # 0. lock when screensaver is activated # 1. lock when screensaver is deactivated # 2. never lock active = widget.get_active() self.lock_delay.set_sensitive(active != 2) def lock_delay_value_changed_cb(self, gparam): '''Enable saving of lock setting when the delay has been modified.''' self.locksettings_changed = True self.apply.set_sensitive(True) def lock_on_suspend_cb(self, widget, gparam): '''Enable saving when locking on suspend is changed.''' self.locksettings_changed = True self.apply.set_sensitive(True) def apply_cb(self, button, data=None): '''Apply changes and update the relevant setting files.''' self.apply_settings() self.apply.set_sensitive(False) def on_window_destroy(self, *args): '''Exit the application when the window is closed.''' Gtk.main_quit() def on_close_clicked(self, *args): '''Exit the application when the window is closed.''' Gtk.main_quit()# Process Management def get_process_username(self, process): """Return the username of the process owner.""" p_user = None try: if old_psutil_format: p_user = process.username else: p_user = process.username() except: pass return p_user def get_process_name(self, process): """Return the name of the running process.""" p_name = None try: if old_psutil_format: p_name = os.path.basename(process.exe) else: p_name = os.path.basename(process.exe()) except: pass return p_name def check_running_process(self, process_name): """Return True if the specified process is active.""" # Find the process... for pid in psutil.pids(): try: p = psutil.Process(pid) if self.get_process_username(p) == username: # Return True if the process is found. if self.get_process_name(p) == process_name: return True except: pass return False def stop_light_locker(self): """Safely stop the light-locker process.""" # Find the process... for pid in psutil.pids(): try: p = psutil.Process(pid) if self.get_process_username(p) == username: # When found, end the light-locker process. if self.get_process_name(p) == 'light-locker': p.terminate() except: pass def run_command(self, cmd, check_output=False): '''Run a shell command, return its output.''' if len(cmd) == 0: return None if check_output: output = subprocess.check_output(cmd, shell=True) if not isinstance(output, str): output = output.decode('utf-8') return output else: subprocess.Popen(cmd.split(" ")) return None def run_command_cb(self, widget, cmd): self.run_command(cmd, False)# Light Locker 1.5.1 def gsettings_init(self): self.gsettings = None schema_source = Gio.SettingsSchemaSource.get_default() if (schema_source.lookup('apps.light-locker', False)): self.gsettings = Gio.Settings.new('apps.light-locker') def gsettings_available(self): return self.gsettings is not None def gsettings_get_settings(self): lock_after_screensaver = self.gsettings.get_uint('lock-after-screensaver') late_locking = self.gsettings.get_boolean('late-locking') lock_on_suspend = self.gsettings.get_boolean('lock-on-suspend') settings = dict() settings['light-locker-enabled'] = self.get_light_locker_enabled() settings['lock-after-screensaver'] = lock_after_screensaver > 0 settings['late-locking'] = late_locking settings['lock-on-suspend'] = lock_on_suspend settings['lock-time'] = \ self.light_locker_time_down_scaler(lock_after_screensaver) return settings def gsettings_set_enabled(self, enable): if enable: light_locker_exec = "light-locker" else: light_locker_exec = "" keyfile = self.get_light_locker_autostart() keyfile.set_value("Desktop Entry", "Exec", light_locker_exec) self.save_light_locker_autostart() def gsettings_set_late_locking(self, enable): self.gsettings.set_boolean("late-locking", enable) def gsettings_set_lock_after_screensaver(self, value): self.gsettings.set_uint("lock-after-screensaver", value) def gsettings_set_lock_on_suspend(self, enable): self.gsettings.set_boolean("lock-on-suspend", enable)# Key Files def ll_keyfile_get_settings(self): # Defaults settings = { 'light-locker-enabled': False, 'lock-after-screensaver': False, 'late-locking': False, 'lock-on-suspend': False, 'lock-time': 10 } keyfile = self.get_light_locker_autostart() if self.get_light_locker_enabled(): settings['light-locker-enabled'] = True ll_exec = keyfile.get_value("Desktop Entry", "Exec"); value = ll_exec.replace("=", " ") splitArgs = shlex.split(value) parser = argparse.ArgumentParser( description='Light Locker Settings') parser.add_argument("--lock-after-screensaver") parser.add_argument("--late-locking", action='store_true') parser.add_argument("--lock-on-suspend", action='store_true') (args, others) = parser.parse_known_args(splitArgs) # Lock after screensaver if args.lock_after_screensaver: if int(args.lock_after_screensaver) != 0: settings['lock-after-screensaver'] = True settings['lock-time'] = self.light_locker_time_down_scaler( int(args.lock_after_screensaver)) # Late Locking if args.late_locking: settings['late-locking'] = True # Lock on Suspend if args.lock_on_suspend: settings['lock-on-suspend'] = True return settings def get_autostart(self, filename, defaults={}): autostart = os.path.join(GLib.get_user_config_dir(), 'autostart') if not os.path.exists(autostart): os.makedirs(autostart) keyfile = GLib.KeyFile.new() dirs = [] dirs.append (autostart) for directory in (GLib.get_system_config_dirs()): dirs.append (os.path.join(directory, 'autostart')) keyfile.load_from_dirs(filename, dirs, GLib.KeyFileFlags.KEEP_TRANSLATIONS) for key in defaults.keys(): try: if keyfile.get_value("Desktop Entry", key) is None: keyfile.set_value("Desktop Entry", key, defaults[key]) except GLib.Error: keyfile.set_value("Desktop Entry", key, defaults[key]) return keyfile def get_light_locker_autostart(self): if self.light_locker_keyfile is not None: return self.light_locker_keyfile defaults = { "Type": "Application", "Name": _("Screen Locker"), "Comment": _("Launch screen locker program"), "Icon": "preferences-desktop-screensaver", "NoDisplay": "true", "NotShownIn": "Gnome;Unity", "Exec": "" } self.light_locker_keyfile = \ self.get_autostart('light-locker.desktop', defaults) return self.light_locker_keyfile def get_screensaver_autostart(self): if self.screensaver_keyfile is not None: return self.screensaver_keyfile defaults = { "Type": "Application", "Name": _("Screensaver"), "Comment": _("Set screensaver timeouts"), "Exec": "" } self.screensaver_keyfile = \ self.get_autostart('screensaver-settings.desktop', defaults) return self.screensaver_keyfile def save_light_locker_autostart(self): filename = os.path.join(GLib.get_user_config_dir(), 'autostart', 'light-locker.desktop') autostart = self.get_light_locker_autostart() autostart.save_to_file(filename) def save_screensaver_autostart(self): filename = os.path.join(GLib.get_user_config_dir(), 'autostart', 'screensaver-settings.desktop') autostart = self.get_screensaver_autostart() autostart.save_to_file(filename)# Settings Parsing def use_screensaver_manager(self, name, command): """Replace the Screensaver settings with a different application.""" self.screensaver_managed = True infobar = self.builder.get_object("screensaver_info") infobar_label = self.builder.get_object("screensaver_info_label") infobar_button = self.builder.get_object("screensaver_info_button") screensaver_frame = self.builder.get_object("screensaver_details") # Light Locker Settings is *NOT* controlling the screensaver. filename = os.path.join(GLib.get_user_config_dir(), 'autostart', 'screensaver-settings.desktop') if os.path.isfile(filename): os.remove(filename) screensaver_frame.hide() # Update the InfoBar infobar_label.set_label( _("Your screensaver settings are managed by %s.") % name) infobar_button.connect("clicked", self.run_command_cb, command) infobar.show() def init_settings(self): if self.gsettings_available(): settings = self.gsettings_get_settings() ll_exec_settings = self.ll_keyfile_get_settings() if ll_exec_settings['lock-after-screensaver']: settings['lock-after-screensaver'] = True if ll_exec_settings['late-locking']: settings['late-locking'] = True if ll_exec_settings['lock-on-suspend']: settings['lock-on-suspend'] = True if ll_exec_settings['lock-time'] != 10: settings['lock-time'] = ll_exec_settings['lock-time'] else: settings = self.ll_keyfile_get_settings() # Replace settings with xfce4-power-manager if self.check_running_process("xfce4-power-manager"): xfpm_sync = light_locker_xfsync.XfpmSync() settings['lock-on-suspend'] = xfpm_sync.get_lock() # Check if any known screensaver managers are currently running. for process_name in screensaver_managers.keys(): if self.check_running_process(process_name): name, command = screensaver_managers[process_name] self.use_screensaver_manager(name, command) break # Extract the settings use_light_locker = settings['light-locker-enabled'] lock_after_screensaver = settings['lock-after-screensaver'] late_locking = settings['late-locking'] lock_on_suspend = settings['lock-on-suspend'] lock_time = settings['lock-time'] screen_blank_timeout, screen_off_timeout = \ self.get_screen_blank_timeout() # Apply the settings self.use_lightlocker.set_active(use_light_locker) self.session_lock_combo.set_sensitive(use_light_locker) self.lock_on_suspend.set_sensitive(use_light_locker) self.lock_delay.set_value(lock_time) if lock_after_screensaver: self.lock_delay.set_sensitive(True) if late_locking: self.session_lock_combo.set_active(1) else: self.session_lock_combo.set_active(0) else: self.lock_delay.set_sensitive(False) self.session_lock_combo.set_active(2) self.lock_on_suspend.set_active(lock_on_suspend) blank = self.light_locker_time_down_scaler(screen_blank_timeout) off = self.light_locker_time_down_scaler(screen_off_timeout) self.screenblank_timeout.set_value(blank) self.screenoff_timeout.set_value(off) def get_light_locker_enabled(self): keyfile = self.get_light_locker_autostart() ll_exec = keyfile.get_value("Desktop Entry", "Exec") return "light-locker" in ll_exec def get_screen_blank_timeout(self): ''' read in the X11 screensaver settings from bash ''' # Defaults screen_blank = 10 screen_off = 15 # Get the xset output to parse. screensaver_output = self.run_command('xset q', check_output=True) # Get the Screen-Blank timeout screenblank_timeout_grep = re.search( "timeout: *(\d+)", screensaver_output) if screenblank_timeout_grep: screenblank_timeout = re.findall( '\d+', screenblank_timeout_grep.group(1)) screen_blank = int(screenblank_timeout[0]) / 60 # Get the Screen-Off timeout screenoff_timeout_grep = re.search( "Standby: *(\d+)", screensaver_output) if screenoff_timeout_grep: screenoff_timeout = re.findall( '\d+', screenoff_timeout_grep.group(1)) screen_off = int(screenoff_timeout[0]) / 60 # Return the current timeout settings return screen_blank, screen_off# Label Formatters def screensaver_label_formatter(self, screenblank_timeout, max_value): '''Convert timeout values to a more friendly format.''' value = int(screenblank_timeout.get_value()) if value == 0: return _("Never") else: return ngettext("%d minute", "%d minutes", value) % (value,) def light_locker_label_formatter(self, light_locker_slider, max_value): '''Convert timeout values to a more friendly format.''' value = int(light_locker_slider.get_value()) if value == 0: formatted_string = _("Never") else: value = self.light_locker_time_up_scaler(value) formatted_string = self.secs_to_readable(value) return formatted_string def secs_to_readable(self, seconds): '''Convert seconds to a more friendly format.''' if seconds >= 60: minutes = seconds / 60 return ngettext("%d minute", "%d minutes", minutes) % (minutes,) else: return ngettext("%d second", "%d seconds", seconds) % (seconds,)# Time Scalers def light_locker_time_up_scaler(self, time): '''Scale times up.''' if time > 60: time = (time - 60) * 60 return time def light_locker_time_down_scaler(self, time): '''Scale times down.''' if time > 60: time = time / 60 + 60 return time# Settings Writing def get_updated_settings(self): """Return a dictionary with the updated settings from the GUI.""" # Get the lock-after-screensaver timeout. session_lock = self.session_lock_combo.get_active() if session_lock == 2: # never lock with screensaver late_locking = False lock_delay = 0 else: if session_lock == 0: # lock when screensaver is activated late_locking = False if session_lock == 1: # lock when screensaver is deactivated late_locking = True lock_delay = self.light_locker_time_up_scaler( int(self.lock_delay.get_value())) # Lock Enabled? lock_enabled = self.use_lightlocker.get_active() # Get the suspend setting. lock_on_suspend = self.lock_on_suspend.get_active() # Get the screen-blank and screen-off timeout. screenblank_timeout = \ int(self.screenblank_timeout.get_value()) * 60 screenoff_timeout = int(self.screenoff_timeout.get_value()) * 60 settings = { "lock-enabled": lock_enabled, "late-locking": late_locking, "lock-after-screensaver": lock_delay, "lock-on-suspend": lock_on_suspend, "screen-blank-timeout": screenblank_timeout, "screen-off-timeout": screenoff_timeout } return settings def apply_settings(self): """Apply updated settings.""" # Get the current settings from the GUI. settings = self.get_updated_settings() lock_on_suspend = settings['lock-on-suspend'] # If xfce4-sesssion is running, sync the lock-on-suspend setting. if self.check_running_process("xfce4-session"): session_sync = light_locker_xfsync.XfceSessionSync() session_sync.set_lock(lock_on_suspend) # If xfpm manages locking, disable it for light-locker. if self.check_running_process("xfce4-power-manager"): xfpm_sync = light_locker_xfsync.XfpmSync() xfpm_sync.set_lock(lock_on_suspend) # Apply the remaining settings to light-locker. self.apply_light_locker_settings(settings) if not self.screensaver_managed: self.apply_screen_blank_settings(settings) def apply_light_locker_settings(self, settings): '''Apply the light-locker settings''' lock_enabled = settings['lock-enabled'] late_locking = settings['late-locking'] lock_on_suspend = settings['lock-on-suspend'] lock_after_screensaver = settings['lock-after-screensaver'] # If GSettings is available, prefer the following method. if self.gsettings_available(): self.gsettings_set_enabled(lock_enabled) self.gsettings_set_late_locking(late_locking) self.gsettings_set_lock_after_screensaver(lock_after_screensaver) self.gsettings_set_lock_on_suspend(lock_on_suspend) return # Else, proceed with the legacy code below # Stop any running light-locker processes. self.stop_light_locker() if late_locking: late_locking = "--late-locking" else: late_locking = "--no-late-locking" if lock_on_suspend: lock_on_suspend = "--lock-on-suspend" else: lock_on_suspend = "--no-lock-on-suspend" lock_after_screensaver = "--lock-after-screensaver=%i" % \ lock_after_screensaver # Build the light-locker command. light_locker_exec = "" if lock_enabled: light_locker_exec = \ "light-locker %s %s %s" % (lock_after_screensaver, lock_on_suspend, late_locking) # Save the light-locker autostart file. keyfile = self.get_light_locker_autostart() keyfile.set_value("Desktop Entry", "Exec", light_locker_exec) self.save_light_locker_autostart() # Execute the updated light-locker command. self.run_command(light_locker_exec) def apply_screen_blank_settings(self, settings): '''Apply the screen blank settings.''' screenblank_timeout = settings['screen-blank-timeout'] screenoff_timeout = settings['screen-off-timeout'] # Build the screen-blank/off command. screensaver_exec = \ "xset s %i dpms %i 0 0" % (screenblank_timeout, screenoff_timeout) # Execute the updated screensaver command. self.run_command(screensaver_exec) # Save the screensaver autostart file. keyfile = self.get_screensaver_autostart() keyfile.set_value("Desktop Entry", "Exec", screensaver_exec) self.save_screensaver_autostart()if __name__ == "__main__": main = LightLockerSettings() Gtk.main()
light-locker-settings
@Jocklad - autologin is now fixed, run Install Updates.
Author
(Read 144918 times)
