Hi everybody

I'm new using LL.

I have a 500GB SSD and additionally installed a 1TB HDD.

I tried to label the SSD partition and the HDD partition. I can change the name of the partitions but not the label.

I have tried to use the "e2label /dev/sd5 "partition label" and "tune2fs -L NEW_LABLE /dev/sda5 and it didn't work.

While writing this, I found that "sudo" was missing before the command. Now it worked with the e2label command  ;D

When I hit "Edit share settings", it doesn't open any files. It just goes straight to the Reload or Restart Services options.

The smb.conf file is there, on /etc/samba/.

Hello ! Trying to install linuxlite on HP4510s probook laptop. Using a live CD the installation runs well but rebooting the error message indicating indicating no disk no boot appears. It seems the bios is "locked" on these laptops. Tried several tips from various linux distributions but nothing worked. Linuxlite operates without a problem from the live cd and even on and usb bootable key but I can't make it run from the hard drive of the laptop. The old windows 7 OS installed on the machine was corrupted so had to eras it... so no OS as I cleaned the disk erasing it before the LL installation. Any solutions/procedures anyone?  Thanks for your help....

Hallo zusammen,

ich habe linux lite auf ein altes Notebook installiert um es meiner Mutter zu geben, damit sie im Internet surfen kann.
Jetzt hab ich 2 Probleme:

1. ich kann das at Zeichen nicht erstellen ALT GR und Q geht nicht und 2. wie kann ich die Tastatur auf deutsch umstellen?

Dankeschön  :bow

(09-08-2023, 01:52 PM)stevef link Wrote:  

Quote:There is some way to upgrade to the 6.6 version from my current one (6.4)  without erasing my disk ?

Yes, just done it on my system.  In-series upgrade don't involve re-installs.


From the Lite Welcome screen
Select Install Updates
Scroll Down to find an Upgrade to 6.6 button


Or
Menu
Settings
Lite Upgrade


If you don't see these options, the instructions in the announcement should help.

In my upgrade it does not say upgrade to 6.6 just 6.4 and When I try the seris upgrade it says I am running the current version.
Why?


This also happens when I try to do a repository upgrade.
===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into the Software - Support - Updates section for assistance.


============ Log ===========


Hit:1 https://linux.teamviewer.com/deb stable InRelease
Get:2 https://linux.teamviewer.com/deb preview InRelease [10.2 kB]
Hit:3 http://archive.ubuntu.com/ubuntu jammy InRelease
Get:4 http://archive.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Hit:5 https://repo.skype.com/deb stable InRelease
Err:6 https://linux.teamviewer.com/deb development InRelease
  403  Forbidden [IP: 2600:9000:26c2:b000:1c:3aaa:b100:93a1 443]
Err:2 https://linux.teamviewer.com/deb preview InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY C5E224500C1289C0
Get:7 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [119 kB]
Hit:8 http://archive.ubuntu.com/ubuntu jammy-backports InRelease
Hit:9 http://archive.canonical.com jammy InRelease
Hit:10 http://mirror.clarkson.edu/linux-lite fluorite InRelease
Hit:11 http://repository.spotify.com stable InRelease
Ign:12 https://dl.google.com/linux/chrome/deb stable InRelease
Hit:12 https://dl.google.com/linux/chrome/deb stable InRelease
Reading package lists...
E: Failed to fetch https://linux.teamviewer.com/deb/dists/d.../InRelease  403  Forbidden [IP: 2600:9000:26c2:b000:1c:3aaa:b100:93a1 443]
E: The repository 'https://linux.teamviewer.com/deb development InRelease' is not signed.
W: GPG error: https://linux.teamviewer.com/deb preview InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY C5E224500C1289C0
E: The repository 'https://linux.teamviewer.com/deb preview InRelease' is not signed.
W: https://repo.skype.com/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.


Whats up?

I resolved my slow shutdown with this generic fix:

change:


to:


My personal root causes were: Session c2 and User Login Management both hanging. Now shutdown is almost instant.

Made my boot times from 1 minute, to a few seconds:

change:


to:


reboot.

Fix is specific ONLY to this systemd service.

I have an Intellimouse.  It works fine except for very glitchy right clock chores.  When I right click I hear several clicks and the menu disappears.  It might take 10 clicks to get a stable menu.  It sounds like a driver thing, but I am not sure where to look.  It works as it should in Windows.

Thanks for any help

Hi there

I'm a total neophyte with Linux (installed Linux Lite yesterday), and have no idea how to install my Canon printer. No idea what I'm doing at all, tbh.

I've followed the manual, but I can't seem to find a driver file for the G5050 at all, and have no idea where to extract the driver file to in any case (unable to install to /usr/share/ppd for some reason).

Can anyone out there advise on a step-by-step for this?

Many thanks

Hello guys, how are you?

I want to install an antivirus system in Linux Lite 6.6. I have already tried some commands but without success. I am a new user, touching these systems.

Could you help me install CLAM AV or COMODO?

I want to install the weather application available on Linux Lite Software Manager. I have already installed it with the GUI but I tried to search the weather app, and I don't see the app on the system tray!

Can you give me some GUI or command instructions to use on the terminal to solve these situations that I want? :003:

Thank you very much.