When I try to use Voucher Codes or sites like it, I get an error message "We can’t connect to the server at cse.google.com." ( Firefox ) or ERR_CONNECTION_REFUSED. (Opera )
My firewall is set to off, although I did try it on and there was no difference, any help appreciated thanks
Hello all,
I have an issue....so my iMac 2006 works fine with LinuxLiteOS. Problem is whenever I boot it up I need to press ALT to get to the EFI boot option. Is there an easier workaround this problem? I would like to just bootup the Imac and load LinuxLiteOS.
Hello,
I'm very new to linux so i wanted to install linux lite to my pc as my second OS.
After installing it everything was fine other than the wireless connection.
I looked up many ways on the internet but there was nothing.
I'm just asking for help here because i'm pretty much hopeless...
Using LL 5.2. Several updates were installed today and after the required reboot, in addition to the grub menu screen disappearing, the message, "System Bootorder not found. Initializing Defaults." began to appear. The PC however did boot. Checking Grub Customizer, the show menu box was still checked. Following the instructions in the last post of this thread...
https://forums.linuxmint.com/viewtopic.php?t=305736
...I was able to make the, "System Bootorder not found. Initializing Defaults." message disappear. However, the grub menu screen still does not appear, even though the show menu box remains checked. Searching for a way to fix the issue I found this:
https://www.aioboot.com/en/show-grub2-menu/
However, the change suggested in the article is already in place on my PC. The change likely having been made because of the Grub Customizer setting for show menu.
A couple of additional notes. After some updates a few days ago I had to ditch the 4.4 kernel that I was using (so that the micro SD reader would be recognized) because of a kernel panic and a non-booting system. I'm now using 5.4, without a working micro SD card reader. Also, the Shift and Esc keys do not now, nor did they ever, make the grub menu screen appear on this PC.
Any ideas on what I can do to make the grub menu screen appear again ?
I just recently installed the latest (?) version of Lite and have had a problem of the system freezing up completely.
May be related to Firefox, not sure. Sometimes when I click a button and sometimes just out of the blue, (usually while on Firefox) the system will freeze. Cursor freezes, and nothing works. I have waited in the hopes it will un-freeze but it doesn't. The only way I can fix it is to re-boot.
Any ideas?
Hello everyone
My laptop runs Linux Mint right now. On one partition is the OS(30gib) on an other is /home(200gib)
As a backup i made copies on my homefolder to an external SSD drive and created a bootable USB-Stick with LinuxLite
What i want is to delite the OS partition and install linux lite insted
How can i keep the home partition?
Hi
I'm new to linux.
I'm facing a lot a problems with -m2070 printer.
When I open cups server and I look for available printers I find several entries of Samsung -m2070, here what I find:
Samsung M2070 Series (Samsung M2070 Series (SEC84251902B75C))
Samsung M2070 Series (Samsung M2070 Series)
Samsung M2070 Series (Samsung M2070 Series (driverless))
What does it mean? Should I install one of those printers?
Anyway even if I install one of the available printers at the end of the process, when _I try to print test page I get the message:"Filter Failed".
Does CUPS work properly with linux lite?
thanks
Can anyone help? When using LL4 I could print in colour. With LL5 (recently upgraded to 5.4) I am only getting greyscale output whichever of the various suggested drivers I install. Using the default (Make and Model: Xerox Phaser 6250N Foomatic/Postscript which shows the driver as POSTSCRI.PPD on a test print) there is no colour option under Printer Options but there is under Job Options - "Printer-color-mode" is set to "monochrome" with NO other choice!.
I have now obtained "6280DN.ppd" from Xerox and tried that. Still getting monochrome only from this computer. Trying a fresh LL5.4 install on a different computer I still get monochrome only with the offered drivers but can at last get colour if I use the Xerox ppd. The versions of the CUPS (Common Unix Printing System) modules - including the postscript driver - are identical.
Hello i need some help, after i pair my controller successfully, whenever i press Triangle button, it's act as Right mouse click instead.
When i press R2 trigger, the cursor keep moving upward non-stop, Is there anyway to fix this PS4 controller driver?
Here is the video result:
https://www.youtube.com/watch?v=mLfi7JsWWh0.
My system info:
inxi -F
System:
Host: pftm-pc Kernel: 5.8.0-50-generic x86_64 bits: 64
Desktop: Xfce 4.14.2 Distro: Linux Lite 5.4 LTS
Machine:
Type: Desktop Mobo: WIBTEK model: H61-MX v: 1.3
serial: <superuser/root required> BIOS: American Megatrends v: 4.6.5
date: 07/30/2012
CPU:
Topology: Dual Core model: Intel Core i3-2120 bits: 64 type: MT MCP
L2 cache: 3072 KiB
Speed: 2213 MHz min/max: 1600/3300 MHz Core speeds (MHz): 1: 2342 2: 2524
3: 2093 4: 1781
Graphics:
Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
driver: i915 v: kernel
Display: x11 server: X.Org 1.20.9 driver: modesetting unloaded: fbdev,vesa
resolution: 1600x900~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 2000 (SNB GT1)
v: 3.3 Mesa 20.2.6
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
driver: snd_hda_intel
Sound Server: ALSA v: k5.8.0-50-generic
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: 00:e0:4c:46:00:75
IF-ID-1: docker0 state: down mac: 02:42:a2:e1:3e:00
Drives:
Local Storage: total: 111.80 GiB used: 23.82 GiB (21.3%)
ID-1: /dev/sda vendor: Western Digital model: WDS120G2G0A-00JH30
size: 111.80 GiB
Partition:
ID-1: / size: 56.84 GiB used: 23.56 GiB (41.4%) fs: ext4 dev: /dev/sda1
ID-2: swap-1 size: 4.00 GiB used: 275.0 MiB (6.7%) fs: swap dev: /dev/sda2
Sensors:
System Temperatures: cpu: 61.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 221 Uptime: 36m Memory: 1.77 GiB used: 1022.4 MiB (56.4%)
Shell: bash inxi: 3.0.38And here is my Bluetooth info:
Bus 001 Device 005: ID 0bda:8771 Realtek Semiconductor Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0x8771
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 Bluetooth Radio
iSerial 3 00E04C239987
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x00b1
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 4 Bluetooth Radio
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 4 Bluetooth Radio
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 4 Bluetooth Radio
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 4 Bluetooth Radio
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 4 Bluetooth Radio
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 4 Bluetooth Radio
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 4 Bluetooth Radio
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Hello everyone
On my windows10-PC with virtualbox and LinuxLite5.4. I've created a share on windows. Now i try to follow the instruction at this link
https://wiki.ubuntu.com/MountWindowsSharesPermanently. In Linuxlite the entire samba package is installed.
So i've created a mountpoint /media/win_share, a credentials-file /homelinuxlite/.smbcredentials with username, password and domain and edit /ect/fstab.
the entry in /etc/fstab looks like this right now:
//xxx.xxx.xx.x/win_share /media/win_share cifs credentials=/home/linuxlite/.smbcredentials,noauto,uid=1000,gid=1000,dir_mode=0700,file_mode=1000,iocharset=utf8,sec=ntlm 0 0a. Does th options have an order? or are they random?
the win_share appears on the desktop but unmounted. when i click on it i got an error massage
Quote:mount: /media/win_share:this operation can be excuted by user root
b. where is my failure ?
ps:I am new to Linux and thank you for your help