Hello Community. I installed Windows 10 lite and Linux Lite (in that order) in an old machine and suddenly the topic`s message appeared. I thought it could be solved reparing the grub. I booted with an ISO with Boot Repair Disk with no right result. Then, I made a trial erasing LL and installing Lubuntu preserving Windows. After the installation, the problem persists. Windows boots properly. I acknowledge the solution.

Hi!
This is my first time using Linux Lite.
I’m looking for a guide to install LL on a 2008 MacBook alongside macOS, dual boot. All attempts with other Linux distributions have led to the deletion of macOS EFI (?) and the inability to use the macOS boot manager - pressing the Options key after power on. What can I do to avoid this?
Thank you.

Hello,
I'm running Linux Lite, but didn't update the system for 3 months. Now I tried to update and my attempt was not successful.

Quote:===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into the Software - Support - Updates section for assistance.

============ Log ===========

Hit:1 https://dl.google.com/linux/chrome/deb stable InRelease
Hit:2 http://security.ubuntu.com/ubuntu jammy-security InRelease
Hit:3 http://repo.linuxliteos.com/linuxlite fluorite InRelease
Hit:4 https://linux.teamviewer.com/deb stable InRelease
Hit:5 http://archive.canonical.com/ubuntu jammy InRelease
Hit:6 http://us.archive.ubuntu.com/ubuntu jammy InRelease
Ign:7 https://ppa.launchpadcontent.net/gezakovacs/ppa/ubuntu jammy InRelease
Hit:8 http://us.archive.ubuntu.com/ubuntu jammy-updates InRelease
Err:9 https://ppa.launchpadcontent.net/gezakovacs/ppa/ubuntu jammy Release
  404  Not Found [IP: 185.125.190.80 443]
Hit:10 http://us.archive.ubuntu.com/ubuntu jammy-backports InRelease
Reading package lists...
E: The repository 'https://ppa.launchpadcontent.net/gezakovacs/ppa/ubuntu jammy Release' does not have a Release file.

Hello, here are my logs

Quote:===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into the Software - Support - Updates section for assistance.

============ Log ===========

Atteint :2 http://archive.canonical.com/ubuntu jammy InRelease
Atteint :3 http://us.archive.ubuntu.com/ubuntu jammy InRelease
Atteint :4 http://us.archive.ubuntu.com/ubuntu jammy-updates InRelease
Atteint :5 https://dl.google.com/linux/chrome/deb stable InRelease
Atteint :6 https://packages.microsoft.com/repos/edge stable InRelease
Réception de :7 http://us.archive.ubuntu.com/ubuntu jammy-backports InRelease [127 kB]
Atteint :8 http://security.ubuntu.com/ubuntu jammy-security InRelease
Err :1 https://linuxlite.3load.com fluorite InRelease
  403  Forbidden [IP : 188.114.97.2 443]
Ign :9 http://linux.dropbox.com/ubuntu disco InRelease
Atteint :10 http://linux.dropbox.com/ubuntu disco Release
Lecture des listes de paquets…
E: Impossible de récupérer http://linuxlite.3load.com/dists/fluorite/InRelease  403  Forbidden [IP : 188.114.97.2 443]
E: Le dépôt http://linuxlite.3load.com fluorite InRelease n'est pas signé.
E: Le dépôt « http://us.archive.ubuntu.com/ubuntu jammy-backports InRelease » a modifié sa valeur « Origin » de «  » à « Ubuntu »
E: Le dépôt « http://us.archive.ubuntu.com/ubuntu jammy-backports InRelease » a modifié sa valeur « Label » de «  » à « Ubuntu »
E: Le dépôt « http://us.archive.ubuntu.com/ubuntu jammy-backports InRelease » a modifié sa valeur « Codename » de «  » à « jammy »
E: Le dépôt « http://us.archive.ubuntu.com/ubuntu jammy-backports InRelease » a modifié sa priorité par défaut pour « apt_preferences(5) » de « 500 » à « 100 ».
W: http://linux.dropbox.com/ubuntu/dists/disco/Release.gpg: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.

Making this thread as told in Previous Thread https://www.linuxliteos.com/forums/sound.../#msg62549

I Need to Install LL 6.6 In My Dual Boot System Replacing the LL 7.0 without destroying the Windows Partition.
I Used "Install Alongside Windows" Option to Install LL 7.0 Previously.

For Conveniance sake i have Detached All HDD Physically and now the System Only Has the SSD (500GB) which Houses both OS (Windows 10 and LL 7.0) the SSD is devided nearly in Half for Each OS.

i was told to run these 2 command and post result here..
1-lsblk
2-sudo fdisk -l


Here are the Results....

1-lsblk
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINTS
loop0    7:0    0  13.9M  1 loop /snap/chromium-ffmpeg/41
loop1    7:1    0    4K  1 loop /snap/bare/5
loop2    7:2    0  74.2M  1 loop /snap/core22/1380
loop3    7:3    0  9.1M  1 loop /snap/chromium-ffmpeg/47
loop4    7:4    0 505.1M  1 loop /snap/gnome-42-2204/176
loop5    7:5    0  91.7M  1 loop /snap/gtk-common-themes/1535
loop6    7:6    0 152.2M  1 loop /snap/opera/315
loop7    7:7    0 152.2M  1 loop /snap/opera/316
loop8    7:8    0  38.8M  1 loop /snap/snapd/21759
loop9    7:9    0  25.6M  1 loop /snap/video-downloader/1169
loop10  7:10  0  25.6M  1 loop /snap/video-downloader/1171
sda      8:0    0 465.8G  0 disk
├─sda1  8:1    0    50M  0 part
├─sda2  8:2    0 241.5G  0 part
├─sda3  8:3    0  546M  0 part
├─sda4  8:4    0    1K  0 part
├─sda5  8:5    0  512M  0 part
└─sda6  8:6    0 223.2G  0 part /

2-sudo fdisk -l
[sudo] password
Disk /dev/loop0: 13.93 MiB, 14610432 bytes, 28536 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 4 KiB, 4096 bytes, 8 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 74.24 MiB, 77844480 bytes, 152040 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 9.14 MiB, 9584640 bytes, 18720 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 505.09 MiB, 529625088 bytes, 1034424 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 91.69 MiB, 96141312 bytes, 187776 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 152.16 MiB, 159547392 bytes, 311616 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 152.17 MiB, 159559680 bytes, 311640 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 465.76 GiB, 500107862016 bytes, 976773168 sectors
Disk model: Samsung SSD 870
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x220a725f

Device    Boot    Start      End  Sectors  Size Id Type
/dev/sda1  *        2048    104447    102400    50M  7 HPFS/NTFS/exFAT
/dev/sda2          104448 506485471 506381024 241.5G  7 HPFS/NTFS/exFAT
/dev/sda3      975650816 976769023  1118208  546M 27 Hidden NTFS WinRE
/dev/sda4      506486782 975650815 469164034 223.7G  f W95 Ext'd (LBA)
/dev/sda5  *    506486784 507535359  1048576  512M ef EFI (FAT-12/16/32)
/dev/sda6      507537408 975650815 468113408 223.2G 83 Linux

Partition table entries are not in disk order.


Disk /dev/loop8: 38.83 MiB, 40714240 bytes, 79520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop9: 25.59 MiB, 26828800 bytes, 52400 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop10: 25.59 MiB, 26828800 bytes, 52400 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

I Have LL 6.6 Bootable Media Ready (Created with Rufus)

Now i Need to Know how to go about replacing LL 7.0 with LL 6.6 without Formatting the Whole SSD and destroying Windows.

Please Note: That this SSD Only Houses Both OS and related Software and Nothing Else, For all the Downloads i use a Seprate HDD Shared with Windows.

Thank you For Reading And taking time to help.

Hello everyone. it is a bit late as i already created a thread for help but i think it appropriate to make this thread.
i am enjoying LL even though i am a Linux Noob and have a lot to learn. the community support here is excelent and i am getting all the help i need. thank you for having me.

Ok, here's the situation.

Installed LL 7 on an old laptop, which I've been using for more or less 10 years, with various distros. But, when the install was finished, I removed the usb stick as required and clicked on the screen button, and then something went amok... Got error message scrolling down the screen, with no end, had to turn the laptop off, the keyboard wasn't responsive, nothing worked.

Reboot seemed ok, installed French language support, then tried to upgrade, but I keep getting this error message, and I can figure out what to do.

"===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into the Software - Support - Updates section for assistance.

============ Log ===========

Atteint :1 http://security.ubuntu.com/ubuntu noble-security InRelease
Atteint :2 http://repo.linuxliteos.com/linuxlite galena InRelease
Atteint :3 http://us.archive.ubuntu.com/ubuntu noble InRelease
Atteint :4 https://ppa.launchpadcontent.net/mozillateam/ppa/ubuntu noble InRelease
Atteint :5 https://dl.google.com/linux/chrome/deb stable InRelease
Atteint :6 https://ppa.launchpadcontent.net/mozilla...ext/ubuntu noble InRelease
Atteint :7 http://us.archive.ubuntu.com/ubuntu noble-updates InRelease
Ign :8 https://ppa.launchpadcontent.net/team-xbmc/ppa/ubuntu noble InRelease
Err :9 https://ppa.launchpadcontent.net/team-xbmc/ppa/ubuntu noble Release
  404  Not Found [IP : 185.125.190.80 443]
Atteint :10 http://us.archive.ubuntu.com/ubuntu noble-backports InRelease
Atteint :11 https://packages.mozilla.org/apt mozilla InRelease
Réception de :12 http://us.archive.ubuntu.com/ubuntu noble/main Translation-en_GB [468 kB]
Réception de :13 http://us.archive.ubuntu.com/ubuntu noble/restricted Translation-en_GB [3,528 B]
Réception de :14 http://us.archive.ubuntu.com/ubuntu noble/universe Translation-en_GB [797 kB]
Réception de :15 http://us.archive.ubuntu.com/ubuntu noble/multiverse Translation-en_GB [96.8 kB]
Lecture des listes de paquets…
E: Le dépôt https://ppa.launchpadcontent.net/team-xbmc/ppa/ubuntu noble Release n'a pas de fichier Release.
W: https://ppa.launchpadcontent.net/mozilla.../InRelease: La signature par clé 0AB215679C571D1C8325275B9BDB3D89CE49EC21 utilise un algorithme faible (rsa1024)
W: https://ppa.launchpadcontent.net/mozilla.../InRelease: La signature par clé 0AB215679C571D1C8325275B9BDB3D89CE49EC21 utilise un algorithme faible (rsa1024)

Any idea how to get rid of the problem ? Thanks
"

I am Using Linux Lite 7.0 Alongside Windows 10 on Dual Boot (i have used the install alongside windows feture)

System Configuration..

Procerssor: Intel Core i5-4590s
Motherboard: H81 Generic (OEM Chinease Board)
Ram: G.Skill Ripjawsx DDR3 8 GB Dual Channel
SSD (OS): Samsung Evo 870 500GB (Half is used for Linux and other Half is used for Windows 10)
HDD: WD Green 1TB (NTFS) (General Storage, Shared with Windows)
Monitor: Acer Nitro y240 with built in speakers
Headphones:Soundcore Life Q 20
USB Wi-FI Dongle
USB Bluetooth Dongle
USB Logitech wireless Keyboard Dongle
USB Wired Logitech Mouse (Wireless one Died :60

Hello Guys, i am a Linux Noob.  After checking out a few OS, i Installed this one as it is very approachable and easy to configure and customize.

Everything is running fine except for one thing.. i do not have any sound in the system. it has been about a couple weeks and i found no solution. So after Lurking about, i Decided to Make a Account and bother you guys directly  :011:

here are the 3 peculiar things i noticed during various troubleshooting methods i used..

1- when connected to wireless headphone the system recognizes them and plays sound via them no problem.

2-when system is in no sound mode, videos on any website do not play. they load but do not play. but connecting the headphone and producing sound makes them play again.

3-everytime i restart, system automatically defaults to analog audio despite my connection being HDMI (both produce no sound).

from what i got after running various commands posted on linux forums is that my audio devices are recognized and working well.
Point to note that windows is playing sound no problem.

Thank you for reading this and plese move it to appropriate section if i have posted in wrong one.

on a side note: can i ask Hardware related questions on this forum or is it limited to Software (Linux) Only?

Hello,
I am trying to mount an external hard drive using the LL 7.0 version, but all I get is an error message. Earlier versions of LL seemed to work well when mounting the same hard drive. The hard drive shows up in the file menu, but it won't open.
Regards,
dheo