I need assistance with connecting my laptop to the internet via Wifi.
I recently installed Linux Lite on my computor from it's Ubuntu operating system. The wifi would connect properly without problem on it's previous operating, however, I cannot connect to the internet via wifi unless it's through the Ethernet cable.
I ran this command "nmcli d" in the terminal which showed that through the Ethernet, I can access the internet, whilst the wifi status remains unavailable.
I also ran this command "lshw -c network" so that I can figure out the hardware adapter, so that I can update the driver. But, it does not show the hardware name for the wifi adapter.
Any assistance will help me out a lot.
Did anyone else notice during the Winter Olympics opening ceremony there was a brief display of the old Windows 7 multi lingual greeting wallpaper on the giant screen there. Don't know if it was a glitch, or if some kind of weird propaganda ploy, or the show programmers were not very creative, or perhaps Chinese MS software and IT is that much out of date. I know they have their own state approved version of MS Windows so it seems weird that they would choose that wallpaper to be part of the show. Maybe BG conned them into a Buick and they think it's a Ferrari.
TC
===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into a new or existing thread for assistance.
============ Log ===========
Hit:1 http://us.archive.ubuntu.com/ubuntu focal InRelease
Hit:2 http://repo.linuxliteos.com/linuxlite emerald InRelease
Hit:3 http://us.archive.ubuntu.com/ubuntu focal-updates InRelease
Hit:4 http://security.ubuntu.com/ubuntu focal-security InRelease
Hit:5 http://archive.canonical.com/ubuntu focal InRelease
Hit:6 http://us.archive.ubuntu.com/ubuntu focal-backports InRelease
Hit:7 https://linux.teamviewer.com/deb stable InRelease
Hit:8 http://ppa.launchpad.net/alexlarsson/flatpak/ubuntu focal InRelease
Hit:9 http://ppa.launchpad.net/gerardpuig/ppa/ubuntu focal InRelease
Ign:10 http://ppa.launchpad.net/oguzhaninan/stacer/ubuntu focal InRelease
Err:11 http://ppa.launchpad.net/oguzhaninan/stacer/ubuntu focal Release
404 Not Found [IP: 91.189.95.85 80]
Reading package lists...
E: The repository 'http://ppa.launchpad.net/oguzhaninan/stacer/ubuntu focal Release' does not have a Release file.
https://www.tomshardware.com/news/linux-...ersion-5-8
Getting some love :54:
Hello new LL 5.6 user here. Trying to switch from Lubuntu to Linux lite for our image we use for company PCs. It is really working very well on our older hardware, but I am running into issues when creating a master image to put on the other hardware and I am not sure where to post my questions. Here are the issues I am running into and if you tell me where to post for help that would be much appreciated.
I set the desktop background to a custom jpg and then create a new image file. Install this image onto another piece of hardware, but the desktop background reverts back to the original Linux-Lite-Wave-and-Rounds-Gradient-Blues-1080p.png. Funny thing is at the login screen it has the correct background, but as soon as I log in with our user it changes the background image.
Another issue I seem to be having is that the screensaver/enable lock screen doesn't seem to be working. It works on the original hardware, but when I put this image on another computer it doesn't seem to lock when it should I did just find another post about a similar issue and will try changing the display blank after minutes to larger than the screensaver timeout.
Thanks,
TBO
Hello Friends,
I'm new to Linux Lite. I read some old posts about virtual keyboards but couldn't find what I wanted. On a Mac or on Ubuntu, one can set virtual keyboards : type with a Spanish layout even if your keyboard is a US QWERTY.
I found the keyboard settings menu, added Spanish but now how do I switch btw native and virtual ?
1. on Mac or Ubuntu I'm used to a little icon (like on Ubuntu or Mac) to switch
2. on Mac or Ubuntu there is a key combination to switch
Any way to do 1 or 2 or both on Linux Lite ?
Thanks
P
Hi all,
After I installed Linux Lite 5.8 I figured that my touchpad doesnt work. Mostly I am using my mouse, but I want touchpad .
It is even didnt registered in the settings.
What to do ?
System:
Host: SoSmooth Kernel: 5.16.0 x86_64 bits: 64 compiler: N/A
parameters: BOOT_IMAGE=/boot/vmlinuz-5.16.0
root=UUID=37aafaac-d3fa-4fa3-b80d-291e79215f69 ro quiet splash
vt.handoff=7
Desktop: Xfce 4.14.2 tk: Gtk 3.24.13 info: xfce4-panel wm: xfwm4
dm: LightDM 1.30.0 Distro: Linux Lite 5.8 LTS
base: Ubuntu 20.04.3 LTS (Focal Fossa)
Machine:
Type: Convertible System: HP product: HP ENVY x360 Convertible 13-ar0xxx
v: N/A serial: <superuser/root required> Chassis: type: 31
serial: <superuser/root required>
Mobo: HP model: 85DE v: 41.36 serial: <superuser/root required> UEFI: AMI
v: F.23 date: 02/05/2021
Battery:
ID-1: BAT0 charge: 44.1 Wh condition: 44.1/44.1 Wh (100%) volts: 17.4/15.4
model: 333-2B-49-A KC04053XL type: Li-ion serial: 1655 status: Full
Memory:
RAM: total: 5.74 GiB used: 3.75 GiB (65.3%)
RAM Report:
permissions: Unable to run dmidecode. Root privileges required.
CPU:
Topology: Quad Core model: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx
bits: 64 type: MT MCP arch: Zen+ family: 17 (23) model-id: 18 (24)
stepping: 1 microcode: 8108109 L2 cache: 2048 KiB bogomips: 33537
Speed: 1263 MHz min/max: 1400/2100 MHz boost: enabled Core speeds (MHz):
1: 1291 2: 1269 3: 1360 4: 1272 5: 1609 6: 1417 7: 1131 8: 1392
Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb
cpuid cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c
flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf
lahf_lm lbrv lm mca mce misalignsse mmx mmxext monitor movbe msr mtrr
mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat
pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb
pfthreshold pge pni popcnt pse pse36 rapl rdrand rdseed rdtscp rep_good
sep sev sev_es sha_ni skinit smap smca sme smep ssbd sse sse2 sse4_1
sse4_2 sse4a ssse3 succor svm svm_lock syscall tce topoext tsc tsc_scale
v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt xgetbv1 xsave xsavec
xsaveerptr xsaveopt xsaves
Vulnerabilities: Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP:
disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Picasso vendor: Hewlett-Packard driver: amdgpu v: kernel
bus ID: 04:00.0 chip ID: 1002:15d8
Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati
unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
OpenGL:
renderer: AMD Radeon Vega 8 Graphics (raven LLVM 13.0.0 DRM 3.44 5.16.0)
v: 4.6 Mesa 22.0.0-devel (git-d4b6d03 2022-02-02 focal-oibaf-ppa)
direct render: Yes
Audio:
Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 04:00.1 chip ID: 1002:15de
Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor
vendor: Hewlett-Packard driver: snd_pci_acp3x v: kernel bus ID: 04:00.5
chip ID: 1022:15e2
Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 04:00.6 chip ID: 1022:15e3
Sound Server: ALSA v: k5.16.0
Network:
Device-1: Realtek RTL8822BE 802.11a/b/g/n/ac WiFi adapter
vendor: Hewlett-Packard driver: rtw_8822be v: N/A port: f000
bus ID: 02:00.0 chip ID: 10ec:b822
IF: wlo1 state: up mac: 40:23:43:82:63:bf
IP v4: 192.168.0.32/24 type: dynamic noprefixroute scope: global
broadcast: 192.168.0.255
IP v6: fe80::4eab:1d5c:18f9:81d3/64 type: noprefixroute scope: link
WAN IP: 109.60.127.167
Drives:
Local Storage: total: 476.94 GiB used: 30.73 GiB (6.4%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 vendor: Intel model: SSDPEKNW512G8H size: 476.94 GiB
block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4
serial: BTNH94200JQV512A rev: HPS0 scheme: GPT
Message: No Optical or Floppy data was found.
RAID:
Message: No RAID data was found.
Partition:
ID-1: / raw size: 196.98 GiB size: 192.89 GiB (97.92%)
used: 7.26 GiB (3.8%) fs: ext4 dev: /dev/nvme0n1p2 label: N/A
uuid: 37aafaac-d3fa-4fa3-b80d-291e79215f69
ID-2: /boot/efi raw size: 571.0 MiB size: 569.9 MiB (99.80%)
used: 8.6 MiB (1.5%) fs: vfat dev: /dev/nvme0n1p1 label: N/A
uuid: 95F7-30E6
ID-3: /home raw size: 268.22 GiB size: 263.01 GiB (98.06%)
used: 23.40 GiB (8.9%) fs: ext4 dev: /dev/nvme0n1p3 label: N/A
uuid: 7757319d-2404-488c-9adf-807d2c85b0d6
ID-4: /run/timeshift/backup raw size: 268.22 GiB
size: <superuser/root required> used: <superuser/root required> fs: ext4
dev: /dev/nvme0n1p3 label: N/A uuid: 7757319d-2404-488c-9adf-807d2c85b0d6
ID-5: swap-1 size: 11.18 GiB used: 53.0 MiB (0.5%) fs: swap
swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/nvme0n1p4
label: N/A uuid: ec6df384-f1b5-4016-9659-b7e7873d7949
Unmounted:
Message: No unmounted partitions found.
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Device-1: 1-3:4 info: SHARKOON 2.4G Mouse type: Mouse
driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s
chip ID: 1ea7:0064
Device-2: 1-4:3 info: Synaptics type: <vendor specific> driver: N/A
interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 06cb:00d2
serial: acef940dc72a
Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
chip ID: 1d6b:0003
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
speed: 480 Mb/s chip ID: 1d6b:0002
Device-3: 3-1:2 info: Lite-On HP Wide Vision HD Camera type: Video
driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 04ca:709d
Device-4: 3-2:3 info: Realtek Bluetooth Radio type: Bluetooth
driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 0bda:b00b
serial: 00e04c000001
Hub: 4-0:1 info: Full speed (or root) Hub ports: 1 rev: 3.1 speed: 10 Gb/s
chip ID: 1d6b:0003
Sensors:
Message: No sensors data was found. Is sensors configured?
Info:
Processes: 280 Uptime: 1h 27m Init: systemd v: 245 runlevel: 5 Compilers:
gcc: 9.3.0 alt: 9 Shell: bash v: 5.0.17 running in: xfce4-terminal
inxi: 3.0.38
Hello there,
On an old laptop, I recently downloaded and installed Linux Lite. It formerly ran two versions of Peppermi t, but one of them has recently been replaced by Linux Lite.
I'm excited to learn more about the system and will undoubtedly have questions.
Regards,
Zunairah
Hi, I'd never used a Linux operating system before. But I'm sick of Microsoft pushing you to update your operating system every few years and forcing you to use software like Edge instead of Firefox (Who wants Edge instead of Firefox?!). Why? ), their bloated, sluggish "enhanced" image viewing software, and so on.
I'm not going to 'upgrade.' Windows 7 is still my operating system.
I installed Ubuntu Touch on a phone and bought a new (old) laptop to convert to Linux. (I'd prefer to maintain Windows 7 on this computer so that I can keep utilising applications and games.)
I'm really contemplating Linux Lite since I'm looking for something quick and easy. Mostly for browsing the internet and creating novels.
I bought a Lenovo Thinkpad X131e laptop.
Here are the specifications:
AMD Radeon HD 5000 GPU Processor: 2.80 GHz RAM: 8 GB
320 GB SSD hard drive
Is Linux Lite a suitable fit for you?
Hi all,
I am new here. I just installed Linux lite 5.8 and Steam.
Installed my Game, Football manager 2022.
I played it without issues on previous distros ( Linux Mint, Arch, Zorin etc).
But now, when I press play, game loaded but got black screen only.
What should I do or check ?
I don't want to switch to another distro, this looks like an awesome one 
Thanks