Loose xfce desktop when HDMI disconnected

[Wirezfree]

Hi altman,

I tried the 3.18 kernel, unfortunately I lost wireless.

If I put the HDMI cable un-plugging issue to one side...

I have:
3.13 I have to use cable connection, but no screen ripping.
3.17 Wireless works, but end up up with screen ripping.
3.18 No Wireless and Screen ripping

So my only hope is to find out how I can get the Wireless drivers that work in 3.17 into 3.13

Thanks... Dave

[altman]

Hope that you fix this mate .

[Wirezfree]

Hi,

Going to try 3.18 later, If I still have the ripping video issue, as in 3.17
I will have to drop back to 3.13, and hope to resolve the HDMI issue.

Dave

[altman]

If 3.18 doesn t work for you , you can always turn back to 3.37 also .

[Wirezfree]

Hi altman.

Yes, I can try 3.18, I have nothing to loose apart from the WiFi.
If there was some way of identifying and extracting the WiFi drivers..??
I could drop back to 3.13, and possibly use the WiFi drivers..??

Then I would only be dealing with Desktop/HDMI issue.

The Bluetooth issue can wait,
It seems it's just to new a card.!!

Dave

[altman]

Ever tried LL 3.18 kernel ! might work .

Did bluetooth was removed due to upgrade ! reinstall it might work .

[Wirezfree]

Hi,

Just tried it, and actually another PC also, always the same result.
Disconnect the HDMI from the New PC output, loose the xfce desktop.

I do now have another issue, The display is ripping during startup/shutdown.

I think this related to:
To fix a lack of Wireless/WiFi I upgraded the kernel to 3.16, WiFi works fine,
no Bluetooth though, lots of people reporting this, newish card AzureWave
mini pcie card, based on Realtek chip-set rtl8723be

NOTE:
the Kernel update was done after discovering the HDMI issue
So I may have to pull the kernel update, and use cable at the moment.

Dave

[altman]

What it does if you switch both cables , just want to check cables if do the same on different pc .

Just to see if it duplicates the issue .

[Wirezfree]

Hi,

I have just installed LL 2.2 on a new Intel based mini PC.
I have it connected directly to a monitor(input #2) via HDMI
The monitors got 2 HDMI inputs, input #1 is my main PC.

If I use the the monitors "switch source input" I can switch between the 2 PC's,
However If I switch from the "New" PC to the other PC and back I loose the
"New PC's" Desktop, I go back and it's black.
If I do a crt alt f3, I can get a system prompt and do a restart of the Desktop.

The other PC is fine, I can go back to that and it's fine, that is running LL 2.0

So the new PC does not like having it's HDMI output switched.

It's not screensaver/display settings in LL 2.2,
I can leave the New PC connected to display for periods of time, screen goes blank
move mouse, tap keyboard and it's back.

Any ideas welcome. (inxi -F below)

Thanks... Dave

Code: [Select]

dave@jetway1:~$ inxi -F
System:    Host: jetway1 Kernel: 3.17.0-linuxlite x86_64 (64 bit) Desktop: Xfce 4.11.6 Distro: Ubuntu 14.04 trusty
Machine:   Mobo: NP93B model: NP93B version: 1.0 Bios: American Megatrends version: BAR3BA02 date: 09/16/2014
CPU:         Dual core Intel Celeron CPU N2807 (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
                Clock Speeds: 1: 1919.519 MHz 2: 1814.500 MHz
Graphics:  Card: Intel ValleyView Gen7 X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: [email protected]
                GLX Renderer: Mesa DRI Intel Bay Trail GLX Version: 3.0 Mesa 10.1.3
Audio:       Card: Intel ValleyView High Definition Audio Controller driver: snd_hda_intel Sound: ALSA ver: k3.17.0-linuxlite
Network:   Card-1: Realtek RTL8723BE PCIe Wireless Network Adapter driver: rtl8723be
                IF: wlan0 state: up mac: 40:e2:30:87:a9:c5
                Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
                IF: p1p1 state: down mac: 00:30:18:c5:08:17
Drives:      HDD Total Size: 123.9GB (3.9% used) 1: id: /dev/sda model: Samsung_SSD_840 size: 120.0GB
                2: USB id: /dev/sdb model: USB_DISK size: 3.9GB
Partition:   ID: / size: 20G used: 4.3G (23%) fs: ext4 ID: /home size: 20G used: 148M (1%) fs: ext4
                ID: swap-1 size: 4.29GB used: 0.00GB (0%) fs: swap
RAID:       No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 33.0C mobo: N/A
                Fan Speeds (in rpm): cpu: N/A
Info:         Processes: 173 Uptime: 2 min Memory: 315.7/1881.8MB Client: Shell (bash) inxi: 1.9.17