Linux Lite Forums › Hardware - Support › Video Cards v
Problem with xorg.conf always regenerate new one


LINUX LITE 7.2 FINAL RELEASED - SEE RELEASE ANNOUNCEMENTS SECTION FOR DETAILS


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Threaded Mode
Problem with xorg.conf always regenerate new one
babuubabuu Offline

Posts: 8
Threads: 1
Joined: Jul 2017
Reputation: 0
#1
07-17-2017, 01:57 AM (This post was last modified: 07-18-2017, 02:49 AM by babuubabuu.)
Hi, I have a problem with editing xorg.conf.
I notice that Linux Lite always regenerate the file every-time I restart my computer so problem is how can I enable coolbits? because it always delete
Code:
Option "Coolbits" "28"
every boot-up

I have tried edit the file manually and with this command
Code:
sudo nvidia-xconfig -a --cool-bits=31
but they don't work.
Find
Reply
Valtam Offline
Administrator
*******
Posts: 8,891
Threads: 541
Joined: Feb 2014
Reputation: 5
#2
07-17-2017, 03:04 AM
Assuming you already installed the nvidia video driver from Install Drivers:

1. Restart your pc.

2. Open a Terminal and enter each line:

Code:
sudo update-grub

Code:
sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

3. Restart your pc.
Download your free copy of Linux Lite today.

Jerry Bezencon
Linux Lite Creator

It wants no straps.

[Image: X5qGkCg.png]

[Image: 0op1GNe.png] [Image: LgJ2mtP.png] [Image: vLZcFUE.png] [Image: lrUHro3.jpg]
Website Find
Reply
babuubabuu Offline

Posts: 8
Threads: 1
Joined: Jul 2017
Reputation: 0
#3
07-17-2017, 07:07 AM (This post was last modified: 07-17-2017, 07:21 AM by babuubabuu.)
Hi, Jerry

First, Thank for replying me
I did what you said step-by-step but It still regenerate new one IDK why (My monitor plugs-in to HDMI Intel on-board if it matter. and I intend to use as headless in the future)

This is xorg.conf before reboot (after using this command sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration)
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 375.66  (buildmeister@swio-display-x86-rhel47-06)  Mon May  1 15:45:32 PDT 2017

Section "ServerLayout"
    Identifier     "layout"
    Screen      0  "Screen0"
    Screen      1  "Screen1" RightOf "Screen0"
    Screen      2  "Screen2" RightOf "Screen1"
    Screen      3  "Screen3" RightOf "Screen2"
    Inactive       "intel"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "keyboard"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor3"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 970"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 6GB"
    BusID          "PCI:2:0:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 6GB"
    BusID          "PCI:3:0:0"
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1080"
    BusID          "PCI:5:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Device3"
    Monitor        "Monitor3"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

This is after I have restarted my PC.
Code:
Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia"
    Inactive "intel"
EndSection

Section "Device"
    Identifier "intel"
    Driver "modesetting"
    BusID "PCI:0@0:2:0"
    Option "AccelMethod" "None"
EndSection

Section "Screen"
    Identifier "intel"
    Device "intel"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:1@0:0:0"
    Option "ConstrainCursor" "off"
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration" "on"
    Option "IgnoreDisplayDevices" "CRT"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:2@0:0:0"
    Option "ConstrainCursor" "off"
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration" "on"
    Option "IgnoreDisplayDevices" "CRT"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:3@0:0:0"
    Option "ConstrainCursor" "off"
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration" "on"
    Option "IgnoreDisplayDevices" "CRT"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:5@0:0:0"
    Option "ConstrainCursor" "off"
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Option "AllowEmptyInitialConfiguration" "on"
    Option "IgnoreDisplayDevices" "CRT"
EndSection
Find
Reply
Valtam Offline
Administrator
*******
Posts: 8,891
Threads: 541
Joined: Feb 2014
Reputation: 5
#4
07-17-2017, 07:28 AM
So you have 4 monitors hooked into 3 different video cards?
Download your free copy of Linux Lite today.

Jerry Bezencon
Linux Lite Creator

It wants no straps.

[Image: X5qGkCg.png]

[Image: 0op1GNe.png] [Image: LgJ2mtP.png] [Image: vLZcFUE.png] [Image: lrUHro3.jpg]
Website Find
Reply
babuubabuu Offline

Posts: 8
Threads: 1
Joined: Jul 2017
Reputation: 0
#5
07-17-2017, 08:01 AM (This post was last modified: 07-17-2017, 08:14 AM by babuubabuu.)
(07-17-2017, 07:28 AM)Jerry link Wrote: So you have 4 monitors hooked into 3 different video cards?

I only have one HDMI plug into Intel on-board VGA. (Nothing plug into all Nvidia cards)
And I have 4 video cards which are GTX 1080, GTX 1060 x2, GTX 970 (and one Intel on-board, If it counts so it's 5 VGA).
Find
Reply
Valtam Offline
Administrator
*******
Posts: 8,891
Threads: 541
Joined: Feb 2014
Reputation: 5
#6
07-17-2017, 08:13 AM
So one monitor and 4+1 video?
Download your free copy of Linux Lite today.

Jerry Bezencon
Linux Lite Creator

It wants no straps.

[Image: X5qGkCg.png]

[Image: 0op1GNe.png] [Image: LgJ2mtP.png] [Image: vLZcFUE.png] [Image: lrUHro3.jpg]
Website Find
Reply
babuubabuu Offline

Posts: 8
Threads: 1
Joined: Jul 2017
Reputation: 0
#7
07-17-2017, 08:16 AM
(07-17-2017, 08:13 AM)Jerry link Wrote: So one monitor and 4+1 video?

Yes, It is. I just plug the HDMI just in case because I usually remote it by teamviewer.
Find
Reply
Valtam Offline
Administrator
*******
Posts: 8,891
Threads: 541
Joined: Feb 2014
Reputation: 5
#8
07-17-2017, 08:19 AM
Before we start, you're going to have to decide which nvidia video card (not the Intel) you're going to use. If you're plugged into the Intel and you reboot, it makes sense that it won't keep the nvidia settings, it's naturally going to load settings for the Intel.
Download your free copy of Linux Lite today.

Jerry Bezencon
Linux Lite Creator

It wants no straps.

[Image: X5qGkCg.png]

[Image: 0op1GNe.png] [Image: LgJ2mtP.png] [Image: vLZcFUE.png] [Image: lrUHro3.jpg]
Website Find
Reply
babuubabuu Offline

Posts: 8
Threads: 1
Joined: Jul 2017
Reputation: 0
#9
07-17-2017, 08:29 AM
(07-17-2017, 08:19 AM)Jerry link Wrote: Before we start, you're going to have to decide which nvidia video card (not the Intel) you're going to use. If you're plugged into the Intel and you reboot, it makes sense that it won't keep the nvidia settings, it's naturally going to load settings for the Intel.

Okey,so let me try again by plugging my monitor to one of my Nvidia card.
I will tell you my result soon. Smile
Find
Reply
babuubabuu Offline

Posts: 8
Threads: 1
Joined: Jul 2017
Reputation: 0
#10
07-17-2017, 09:22 AM
Okey,
1. I plug my monitor to GTX 970 (from the Intel, Just to be clear I have only one monitor in the system.)
2. I applied these two commands
Code:
sudo update-grub
Code:
sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration
3. Then I rebooted my PC

After that it can't boot into the GUI. It takes me to TTY and when I place Ctrl+Alt+F7, It show only black screen.
This is the xorg.conf that make my PC can't get to the GUI.
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 375.66  (buildmeister@swio-display-x86-rhel47-06)  Mon May  1 15:45:32 PDT 2017

Section "ServerLayout"
    Identifier     "layout"
    Screen      0  "Screen0"
    Screen      1  "Screen1" RightOf "Screen0"
    Screen      2  "Screen2" RightOf "Screen1"
    Screen      3  "Screen3" RightOf "Screen2"
    Inactive       "intel"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "keyboard"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor3"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 970"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 6GB"
    BusID          "PCI:2:0:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1060 6GB"
    BusID          "PCI:3:0:0"
EndSection

Section "Device"
    Identifier     "Device3"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 1080"
    BusID          "PCI:5:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen3"
    Device         "Device3"
    Monitor        "Monitor3"
    DefaultDepth    24
    Option         "AllowEmptyInitialConfiguration" "True"
    Option         "Coolbits" "28"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)