0 Members and 1 Guest are viewing this topic.
There's no need to use that file. Sent from my Mobile phone using Tapatalk
This portion is copied from the links i mentioned at the end of this article. Open a terminal and paste following:sudo apt-get install libusb-dev build-essential libsane-devsudo apt-get install git-core # Only if you don't have git installedgit clone git://git.debian.org/sane/sane-backends.gitcd sane-backendscd sane-backendsexport BACKENDS="net mustek mustek_usb genesys"./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/varmakesudo make installsudo bluefish /lib/udev/rules.d/40-libsane.rules
sudo apt-get install libusb-dev build-essential libsane-dev
cd USER/sane-backends
export BACKENDS="net mustek mustek_usb genesys"./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/varmakesudo make installsudo bluefish /lib/udev/rules.d/40-libsane.rules
scanimage -L
scanimage -d genesys:libusb:002:004 --format=tiff >image.tiff
scanimage -d genesys:libusb:001:003 --format=tiff >image.tiff
Hello sanmayjoshi,on the first link there are some solutions others used for this, via links in their replies, it may be worth checking them in case it can solve it .
The second link is for another scanner, the method was used to solve an USB issue on the Canon Lide 100. As you wrote you are using the scanner by USB it is worth looking at this to confirm there is not a USB issue, that prevents your scanner working etc.
.gz (tar, tar ball) it is like a zip file. Right click the downloaded file and from the menu that will appear select "extract here" .Once extracted you will see the files, and files types, if you are unsure how to install them, then members may know how to install them once the files can be specified.
Hello sanmayjoshi,do any of these solve it ? - https://ubuntuforums.org/showthread.php?t=2324912https://askubuntu.com/questions/457901/usb-2-0-device-scanner-does-not-work-with-xhci-hcd-on-usb-3-0-system
http://www.canon.co.uk/support/consumer_products/products/scanners/lide_series/canoscan_lide_100.aspx?type=drivers&language=&os=LINUXLinux drivers are listed. Not sure how you add these. Perhaps someone can advise OP.SORRY _ Just seen that clicking linux draws a blankhttp://manpages.ubuntu.com/manpages/zesty/man5/sane-genesys.5.htmlMy LIDE 210 is working ok on both 32 & 64 bit LL3.4 "out of the box" i.e no mods , so there might be hope.
sudo apt-get install sane #this shall install sane with any dependencies
scan-find-scanner
cd USER/sane-backends #it may differ in your case
export BACKENDS="net mustek mustek_usb genesys"./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/varmakesudo make installsudo bluefish /lib/udev/rules.d/40-libsane.rules #I use bluefish editor
# Canon CanoScan Lide 100 ATTRS{idVendor}==”04a9″, ATTRS{idProduct}==”1904″, ENV{libsane_matched}=”yes”