I've been playing around with LL as a virtual machine guest for a year or so now and it occurred to me that I've never lookied into optimizing it for running in that environment (beyond installing the QEMU guest agent, with which I've had limited success).
While I'm interested in any optimization suggestions, in my case I'm using QEMU KVM (on and Unraid server) and accessing it via RDP (usually over the internet) mostly for email (Thunderbird) and web browser use (Chrome / Firefox). Due to host hardware limitations my VM is currently only allocated 3G of memory. :-(
If anybody has any suggestions on optimization settings for the VM or remote access, I'd love to hear them!
Thanks!
Ok i have place at this old p4 optiplex 745 a agp video card
it shows fine with windows. BUT with linux lite 3.8 32bits it shows 256 but the card is 512
here is some info *-display
description: VGA compatible controller
product: Cedar [Radeon HD 5000/6000/7350/8350 Series]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:27 memory:d0000000-dfffffff memory:fe9e0000-fe9fffff ioport:dc00(size=256) memory:fea00000-fea1ffff
Is there any work around to make it to what it is?? Or do i need a better one.arxontas
If there was to be one default game installed on Linux Lite, just as the distro comes, what would it be, from among those available, to be understood?
Do you think Linux Lite should have any game installed by default at all?
Hey [member=2]Jerry[/member], I found THIS page telling how to switch Ubuntu mode of operation into performance orientated, changing from the apparently default powersaving one. I think the program listed at the end - the 'indicator-cpufreq' - could come as default install on the distro, if fully compatible, to help people choose the performance mode more easily. If that makes better sense and does work, that is.
Hello. I had installed LL on my sister's old Vaio. When trying to boot up, it seems stuck in a loop.
It will show the feather, check speakers, then the screen goes blank.
digging deeper, here's where it's getting stuck
....
[<c17c55dc>] sysenter_past_esp+0x3d/0x61
Code: ff ff 64 a1 00 a6 c8 c1 89 45 f0 89 7d d8 a1 a4 52 c8 c1 c7 45 dc 0a 00 00 00 89 45 e0 64 c7 05 00 a6 c8 c1 00 00 00 00 fb 90 <8d> 74 26 00 ba ff ff ff ff bf 00 92 ae c1 0f bc 45 f0 0f 44 c2
(I hope I typed those right)
I was running 4.4.0-102
with dual boot into windows XP
Thanks!
I was using Brave on this Dell before, now I just get a small blank window for a second then nothing. I did "Restore files [from another LL running Brave] to original locations", so that might have something to do with it...?
https://srvfail.com/brave-browser-fails-...d-profile/ suggests a locked profile. I am not familiar with the command lines referred to but I did try /var/log/messages but permission denied.
https://github.com/brave/browser-laptop/issues/11829 one poster suggests rm /home/$USER/.config/brave/SingletonLock - I tried this, changing user to my own, but "no such file"
I tried removals, complete removals, re-installs of brave and brave keyring, no luck. Brave does show in menu/internet.
I know ad-free brave is not encouraged here, but I do donate to LL.
If I knew where the brave profile is on LL, I wonder could I replace it with the one from my other LL 4.x computer, or is it more complicated than that?
I could re-install LL 4 then Restore files, though that might also restore the problem. Anyway I'd prefer not to re-install.
hello there i use a laptop dv6000 pavilio from hp and i run linux lite 4.4 and i can not conect my speaker via bluetooth other speakers conecting successfully (jbl go) and the speaker (jbl flip 3) workd well via other device (smart phone nokia 3.1 and lumia 650)
The laptop ask for some pin for me to conect but i dont have any pin ...
any ideas
(sorry for my English )
I recently tried to update my printer files, which didn't work and now the update keeps looking for these and comes up with an error. How can I get my update to forget about printer files and work normally again please. Copy of error log below
============ Log ===========
Hit:1 http://archive.canonical.com xenial InRelease
Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [109 kB]
Ign:3 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial InRelease
Hit:4 http://ppa.launchpad.net/nemh/systemback/ubuntu xenial InRelease
Hit:5 http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu xenial InRelease
Hit:6 http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu xenial InRelease
Hit:7 http://us.archive.ubuntu.com/ubuntu xenial InRelease
Ign:8 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial Release
Ign:9 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main amd64 Packages
Get:10 http://us.archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB]
Ign:11 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main i386 Packages
Ign:12 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main all Packages
Ign:13 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en_US
Ign:14 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en
Ign:9 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main amd64 Packages
Ign:11 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main i386 Packages
Ign:12 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main all Packages
Ign:13 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en_US
Ign:14 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en
Ign:9 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main amd64 Packages
Get:15 http://us.archive.ubuntu.com/ubuntu xenial-backports InRelease [107 kB]
Ign:11 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main i386 Packages
Ign:12 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main all Packages
Ign:13 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en_US
Ign:14 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en
Ign:9 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main amd64 Packages
Get:16 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages [990 kB]
Ign:11 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main i386 Packages
Ign:12 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main all Packages
Ign:13 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en_US
Ign:14 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en
Ign:9 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main amd64 Packages
Ign:11 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main i386 Packages
Ign:12 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main all Packages
Ign:13 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en_US
Ign:14 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en
Err:9 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main amd64 Packages
404 Not Found
Get:17 http://us.archive.ubuntu.com/ubuntu xenial-updates/main i386 Packages [841 kB]
Ign:11 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main i386 Packages
Ign:12 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main all Packages
Get:18 http://us.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 Packages [756 kB]
Ign:13 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en_US
Get:19 http://us.archive.ubuntu.com/ubuntu xenial-updates/universe i386 Packages [691 kB]
Ign:14 http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial/main Translation-en
Hit:20 http://repo.linuxliteos.com/linuxlite citrine InRelease
Fetched 3,602 kB in 2s (1,658 kB/s)
Reading package lists...
W: The repository 'http://ppa.launchpad.net/hplip-isv/ppa/ubuntu xenial Release' does not have a Release file.
E: Failed to fetch http://ppa.launchpad.net/hplip-isv/ppa/u...4/Packages 404 Not Found
E: Some index files failed to download. They have been ignored, or old ones used instead.
I was just thinking, that when the Win7 end-of-life comes in January 2020, this may be followed by a flood of used laptops for sale, as many are unlikely to be upgradeable to Win10. Hopefully, this will mean rich pickings for those in search of a good deal for an inexpensive laptop for a Linux Lite setup ... 8)
Hello,
I have the strangest of problems.
I'm installing Linux Lite on my mother's old laptop: I've burned the 3.8 ISO on a DVD (for the machine doesn't accept USB boot, and it's 32bit) and runned the OS from the DVD: flawless WiFi out-of-the-box.
Partitioning, formatting and installing the OS on the HD brings me a grayed out "Wi-Fi Networks" and "Wi-Fi is disabled by hardware switch" flyout menu. Now, it is true that the HP Compaq Presario CQ60 has a physical button that switches on/off the WiFi, but:
- Pushing the button has no effect – it is always retro-illuminated, which should mean it's on
- It was retro-illuminated by default when the Linux was running from the DVD anyway
I am a bit puzzled.
In case it helps, I've run inxi -Nn and the result is a Realtek RTL8101/2/6E for Ethernet, and Qualcomm Atheros AR242x / AR542x for the wifi; driver: ath5k; IF: wlp3s0; state: down.
The output of sudo rfkill list is:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
1: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: yes
So, to my newbie eyes, the OS fails to understand that the Wifi is already switched on... maybe? And why hadn't had any problem when running from DVD?
Thanks in advance for any guidance you can provide – please remember that I have zero experience with this stuff

Davide

