Hey there everyone,

Not sure how much information one needs to help me get Valgrind to be fully setup. If necessary, I will post the version of Linux Lite and Code::Blocks currently installed on my computer. HOpefully, what is included will be sufficient.

I am currently using Code::Blocks as my compiler. I have created a simple project by the name of DynIntArray. in this project there are two classes:
DynIntArray & DynVoidArray. Each one has a dynamic array. In order to verify that my project is not leaking memory, I am hoping to use Valgrind. I have already installed it, but I now need to edit the bashrc file so it includes "export VALGRIND_LIB = '/usr/lib/valgrind'. Unfortunately, once I have opened the bashrc file to edit it, I am not sure how to save it. Furthermore, the video I was watching seems to be meant for Ubuntu rather than Linux Lite. How may I open, edit, and save the changes I wish to make to the .bashrc file? Hopefully, with some assistance, I can check to ensure the project is not leaking memory.

Thank you for reading this post, and I very much look forward to reading your responses.

:49:  Linux lite 4.8,

my Lenovo 64bit desktop PC is doing something funny when i start it up first thing in the morning.
it never did this before, started doing it after one of the updates between 9-1-21 and 9-9-21.
when my PC starts up my DVD player would pop out and then go back in, i made a video of it, but yet to upload it , ha ha .

what is causing this ?, it never did this ?. there is no disk in it .

help please.
thank you , hugs.

Hi Everyone,

I have an HP Chromebook 11 G4 Chromebook. Chrome OS is EOL, Followed instructions from Neverware, and updated bios, and now can install pretty much any OS I choose.  I choose Linux Lite, due to it working so well for me in the past. The problem lies where I have no sound. The card comes up as "Dummy"  It is an Intel Card. I try Aplay and says it dont exist. PulseAudio dont do to much either. I will attach information I captured in settings on the hardware I am using, and the messages I get.  To help, I have tried several different versions of Linux, Ubuntu, Debian,Fedora, and of course Linux Lite. The only one that actually gives me sound is Fedora.  But it is so low you have to put the laptop speaker next to your ear to hear it. Sound worked perfectly on regular chrome os.  Spent a lot of time on this, and I actually have three more of these of the same chromebook, I need to do.  I appreciate your help.

Jeff

******Info*******

jeffrey  ~  127  aplay -l**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: chtmax98090 [chtmax98090], device 0: Audio (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: chtmax98090 [chtmax98090], device 1: Deep-Buffer Audio (*) []
  Subdevices: 1/1
  Subdevice #0: subdevice #0

jeffrey  ~  130  aplay -L
surround21
    2.1 Surround output to Front and Subwoofer speakers
surround40
    4.0 Surround output to Front and Rear speakers
surround41
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50
    5.0 Surround output to Front, Center and Rear speakers
surround51
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
null
    Discard all samples (playback) or generate zero samples (capture)
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pulse
    PulseAudio Sound Server
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
default
    Playback/recording through the PulseAudio sound server
hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
hdmi:CARD=PCH,DEV=1
    HDA Intel PCH, HDMI 1
    HDMI Audio Output
dmix:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct sample mixing device
dmix:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Direct sample mixing device
dsnoop:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct sample snooping device
dsnoop:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Direct sample snooping device
hw:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Direct hardware device without any conversions
hw:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Direct hardware device without any conversions
plughw:CARD=PCH,DEV=3
    HDA Intel PCH, HDMI 0
    Hardware device with all software conversions
plughw:CARD=PCH,DEV=7
    HDA Intel PCH, HDMI 1
    Hardware device with all software conversions
usbstream:CARD=PCH
    HDA Intel PCH
    USB Stream Output
sysdefault:CARD=chtmax98090
    chtmax98090,
    Default Audio Device
dmix:CARD=chtmax98090,DEV=0
    chtmax98090,
    Direct sample mixing device
dmix:CARD=chtmax98090,DEV=1
    chtmax98090,
    Direct sample mixing device
dsnoop:CARD=chtmax98090,DEV=0
    chtmax98090,
    Direct sample snooping device
dsnoop:CARD=chtmax98090,DEV=1
    chtmax98090,
    Direct sample snooping device
hw:CARD=chtmax98090,DEV=0
    chtmax98090,
    Direct hardware device without any conversions
hw:CARD=chtmax98090,DEV=1
    chtmax98090,
    Direct hardware device without any conversions
plughw:CARD=chtmax98090,DEV=0
    chtmax98090,
    Hardware device with all software conversions
plughw:CARD=chtmax98090,DEV=1
    chtmax98090,
    Hardware device with all software conversions
usbstream:CARD=chtmax98090
    chtmax98090
    USB Stream Output

Hey gang;
Been a linux user since "old" Redhat 5.2 in 1998 .  I use Linuxlite because I use old hardware (which it runs on), I like XFCE, and I like that its downstream from Debian/Ubuntu.  Your web site, especially your download page is clogged with ads, circular links, and links to junk software.  There is not, that I have found, an obvious download link on the download page to download the latest version (all the links I found seem to lead elsewhere). I finally got the download from the ftp mirror.  Gang, I really like and use this distribution, but are you trying to commit web design suicide??.  To the web site designer, "Glad your here, but please go back to the drawing board, site is really bad / hard to use because of the above".  Have a great day.
geeksw
John 3:16

Just a couple of months ago we lingered in the mid 20's, not sure why we have climbed so high so quickly...but it's nice.

Hello,
I am looking for "Browse C Drive" in Linux Lite 5.6.
It used to be in the Menu.

Regards,

dheo

Hello,
I am looking for "Browse C Drive" in Linux Lite 5.6.
It used to be in the Menu.

Regards,
dheo

I posted this once but didn't see it after a few hours.  So apologies if it appears twice.  I installed Linux Lite 5.6 to a SSD using a newer motherboard system with UEFI and a Ryzen CPU.  I was then able to boot from that SSD fine.  I then moved the SSD to the target system an old Athlon 64b 3500+ PC.  It will not boot to the hard drive. I've also tried a Seagate rotating drive with the same results.  The drives are recognized by the BIOS (non secure) but I only see a cursor on the display.

Running from the DVD I can see that the partitions seem to be correct using Gparted.  I have attached a txt file of the system HW and a link to a screen shot of the Gparted is here:

https://imgur.com/a/3KAnhaN

Hello Everyone:  I installed 5.4 on a Gateway notebook and the keyboard is not the best.  I need a on-screen keyboard but have not been able to find a built-in one in 5.4.  Where can I find one that I can download and install?
Thanks,
Planorez

Hi all!

I've been using Linux Lite for a year without any real issues. After a recent update I'm hitting the login loop (back to login screen after entering the password over and over again) and can't access the system. I've tried some of the fixes that were linked to Ubuntu website in this forum but so far none of them did the trick of allowing me past the login screen. Is anyone here available to provide some troubleshooting help? I'm facing some data loss if I have to reinstall so any help would be greatly appreciated.

Kris