When running Vivaldi in my recently installed Linux Lite operating system, the right side is clipped.
I can get it back on the screen if I reset the scale in the panel on the right hand side next to the time indication, but I have to reduce it to 60% or less. Then the text is vanishingly small.
Is it the operating system or the browser?
What need I do to set this correctly please?
Jim.
I have a new Realtek 88x2bu WiFi dongle and I'm trying to install it in Linux Lite.
It installs the equivalent drivers : rtl8812AU_8821AU_linux drivers according to information received.
Terminal results:
[sudo] password for jim:
Hit:1 http://repo.linuxliteos.com/linuxlite fluorite InRelease
Get:2 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Hit:3 http://archive.canonical.com/ubuntu jammy InRelease
Hit:4 https://dl.google.com/linux/chrome/deb stable InRelease
Hit:5 http://us.archive.ubuntu.com/ubuntu jammy InRelease
Ign:6 https://repo.vivaldi.com/stable/deb stable InRelease
Get:7 http://us.archive.ubuntu.com/ubuntu jammy-updates InRelease [114 kB]
Hit:8 https://repo.vivaldi.com/stable/deb stable Release
Get:10 http://us.archive.ubuntu.com/ubuntu jammy-backports InRelease [99.8 kB]
Fetched 324 kB in 6s (52.5 kB/s)
Reading package lists... Done
jim ~ sudo apt-get install linux-headers-generic build-essential git
git clone https://github.com/abperiasamy/rtl8812AU_8821AU_linux.git
cd rtl8812AU_8821AU_linux
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
build-essential is already the newest version (12.9ubuntu3).
git is already the newest version (1:2.34.1-1ubuntu1.4).
linux-headers-generic is already the newest version (5.15.0.46.46).
0 to upgrade, 0 to newly install, 0 to remove and 2 not to upgrade.
fatal: destination path 'rtl8812AU_8821AU_linux' already exists and is not an empty directory.
jim master ~ rtl8812AU_8821AU_linux However, when I go to remove prior to re-installing, this is the result:
Welcome to Linux Lite 6.0 jim
Friday 26 August 2022, 18:48:59
Memory Usage: 980/3671MB (26.70%)
Disk Usage: 12/457GB (3%)
Support - https://www.linuxliteos.com/forums/ (Right click, Open Link)
jim ~ sudo apt install linux-generic
[sudo] password for jim:
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
linux-generic is already the newest version (5.15.0.46.46).
0 to upgrade, 0 to newly install, 0 to remove and 2 not to upgrade.
jim ~ sudo rmmod rtl8812au
rmmod: ERROR: Module rtl8812au is not currently loaded
jim ~ 1 How to I fix the "not currently loaded" problem?
My computer:
jim ~ sudo lshw -short
H/W path Device Class Description
===========================================================
system Studio One 1909
/0 bus 0VWC5F
/0/0 memory 64KiB BIOS
/0/4 processor Intel(R) Core(TM)2 Duo CPU E
/0/4/5 memory 64KiB L1 cache
/0/4/6 memory 3MiB L2 cache
/0/1e memory 4GiB System Memory
/0/1e/0 memory 2GiB DIMM SDRAM Synchronous 800
/0/1e/1 memory 2GiB DIMM SDRAM Synchronous 800
/0/100 bridge MCP79 Host Bridge
/0/100/0.1 memory RAM memory
/0/100/3 bridge MCP79 LPC Bridge
/0/100/3/0 system PnP device PNP0c02
/0/100/3/1 system PnP device PNP0b00
/0/100/3/2 system PnP device PNP0c02
/0/100/3/3 system PnP device PNP0c02
/0/100/3/4 system PnP device PNP0c02
/0/100/3/5 system PnP device PNP0c01
/0/100/3.1 memory RAM memory
/0/100/3.2 bus MCP79 SMBus
/0/100/3.3 memory RAM memory
/0/100/3.4 memory RAM memory
/0/100/3.5 processor MCP79 Co-processor
/0/100/4 bus MCP79 OHCI USB 1.1 Controller
/0/100/4/1 usb3 bus OHCI PCI host controller
/0/100/4/1/4 input9 input Dell Dell USB Keyboard
/0/100/4/1/5 input Touchscreen
/0/100/4.1 bus MCP79 EHCI USB 2.0 Controller
/0/100/4.1/1 usb1 bus EHCI Host Controller
/0/100/4.1/1/2 scsi6 storage USB Reader
/0/100/4.1/1/2/0.0.0 /dev/sdb disk STORAGE DEVICE
/0/100/4.1/1/2/0.0.0/0 /dev/sdb disk
/0/100/4.1/1/6 input11 multimedia OEM Camera
/0/100/6 bus MCP79 OHCI USB 1.1 Controller
/0/100/6/1 usb4 bus OHCI PCI host controller
/0/100/6/1/2 input5 input Logitech 2.4GHz Cordless Desktop
/0/100/6/1/3 input10 input PixArt HP USB Optical Mouse
/0/100/6.1 bus MCP79 EHCI USB 2.0 Controller
/0/100/6.1/1 usb2 bus EHCI Host Controller
/0/100/6.1/1/4 generic USB3.0 802.11ac 1200M Adapter
/0/100/8 card0 multimedia MCP79 High Definition Audio
/0/100/8/0 input12 input HDA NVidia Mic
/0/100/8/1 input13 input HDA NVidia Line Out
/0/100/8/2 input14 input HDA NVidia Front Headphone
/0/100/9 bridge MCP79 PCI Bridge
/0/100/b scsi0 storage MCP79 AHCI Controller
/0/100/b/0 /dev/sda disk 500GB ST500DM002-1ER14
/0/100/b/0/1 /dev/sda1 volume 1023KiB BIOS Boot partition
/0/100/b/0/2 volume 512MiB Windows FAT volume
/0/100/b/0/3 /dev/sda3 volume 465GiB EXT4 volume
/0/100/b/1 /dev/cdrom disk DVD+-RW GA11N
/0/100/c bridge MCP79 PCI Express Bridge
/0/100/10 bridge MCP79 PCI Express Bridge
/0/100/10/0 /dev/fb0 display C79 [GeForce 9200]
/0/100/15 bridge MCP79 PCI Express Bridge
/0/100/16 bridge MCP79 PCI Express Bridge
/0/100/17 bridge MCP79 PCI Express Bridge
/0/100/17/0 enp6s0 network NetLink BCM5906M Fast Ethernet P
/0/100/18 bridge MCP79 PCI Express Bridge
/1 input0 input Power Button
/2 input1 input Power Button
jim ~ Jim
I tried to fetch the required updates for my newly installed Linux Lite operating system.
It resulted in this message:
===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.linuxliteos.com/forums/ and paste the log below into a new or existing thread for assistance.
============ Log ===========
Reading package lists...
E: Could not get lock /var/lib/apt/lists/lock. It is held by process 1460 (packagekitd)
E: Unable to lock directory /var/lib/apt/lists/
What should I do about this please?
Jim.
Howdy folks,
I asked this question a few months ago when I downloaded the new Thunderbird mail and installed it on the W7 side. Does anyone know when the 102.01 series will be available for update on Linux Lite? On the Ubuntu website it is available as a snap or flatpack, also states it is available for download from the Thunderbird site as well. There are many security updates on the newest version as well as UI improvements so I ask again does anyone know when the update will trickle down to Linux Lite?
Hello everyone,
I'm new to linux.
I changed ma operating system to linux about one month ago.
Today I wanted to fetch the newest updates.
But all I got were the following error messages.
Would be happy if someone could help me.
thx
============ Log ===========
OK:1 http://packages.microsoft.com/repos/code stable InRelease
OK:2 https://dl.google.com/linux/chrome/deb stable InRelease
Ign:3 https://ppa.launchpadcontent.net/oguzhan...cer/ubuntu jammy InRelease
OK:4 http://us.archive.ubuntu.com/ubuntu jammy InRelease
OK:5 http://archive.canonical.com/ubuntu jammy InRelease
Holen:6 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Fehl:7 https://ppa.launchpadcontent.net/oguzhan...cer/ubuntu jammy Release
404 Not Found [IP: 2620:2d:4000:1::3e 443]
Holen:8 http://us.archive.ubuntu.com/ubuntu jammy-updates InRelease [114 kB]
OK:9 http://repo.linuxliteos.com/linuxlite fluorite InRelease
Holen:10 http://us.archive.ubuntu.com/ubuntu jammy-backports InRelease [99,8 kB]
Paketlisten werden gelesen…
E: Das Depot »https://ppa.launchpadcontent.net/oguzhaninan/stacer/ubuntu jammy Release« enthält keine Release-Datei.
Hi, my own Linux Lite 6.0 desktop looks as it should (top image below). I created an account for my son, log into his account, and...the desktop looks entirely different (bottom image):
https://imgur.com/a/xdLxQUr
How can I change this to look like the default one (like mine)?
Thanks/Evert
Hi all,
The HP Laser MFP 135w printer/scanner appears to be tricky to get to work under Linux since it is not supported by HPLIP, despite being manufactured by HP (well, who knows really). After some googling and trying I managed to get it to work and it is actually pretty straightforward. I thought I'd share my experience, maybe this is useful for others with the same or similar models. I am running Linux Lite 6.0.
1) download the printer driver from here: https://support.hp.com/us-en/drivers/sel...l/24494382. Initially the page may state that 'We were unable to find drivers for your product.' Click on 'Choose a different OS', select 'Linux' as operating system, and 'Ubuntu' as version. You can then download the driver.
2) extract the driver archive in a temporary folder. This gives a folder named 'uld' with several subfolders and 6 shell scripts.
3) as root (sudo) run the install-printer.sh script and then the install-scanner.sh script (default options throughtout)
4) from the Lite menu open the 'Configure Printers' app and select 'Add' to add a new printer
5) after a few seconds your printer should show up automatically under the Network printer list (make sure the printer is turned on). I selected the top entry that said:
HP Laser MFP 131 133 135-138 (192.168.86.28)
6) Click forward and let the program search for drivers - it will not find any
7) Under 'Choose Driver' select 'Provide PPD file'
8| Browse to /usr/share/ppd/uld-hp and open the file HP_Laser_MFP_13x_Series.ppd (this file was created when installing the drivers under step 3)
9) Click Forward, and rename your printer if necessary
10) Print a test page
The Document Scanner program that comes default with Linux Lite 6.0 worked out of the box after this. It may take a few seconds for your compouter to find the scanner on your network.
Good luck/Evert
I installed LL 6.0 on an old machine via DVD. Apparently this mobo uses UEFI which I haven't used before.
After the install was done, booting the machine doesn't automatically start LL. It just stops with a blinking cursor. No other OS on the machine.
If I press F11 at boot for the boot menu, it doesn't show the grub menu I am used to but there is an option to boot Ubuntu. If I select this, then LL will boot ok.
So my questions are why doesn't LL start automatically and how can I get the grub menu to display automatically at boot with this UEFI stuff?
I want to run a small Windows application in my little mini laptop. I have Linux Lite 3.8 installed.
How do I install Wine in this operating system?
Or first of all, is it possible?
Jim.
I'm running the latest LL OS always updated. Dell laptop has been running this OSs for several years now no real issues.
Today I booted the lap top up and noted that the home page is displaying some abnormal operations I'm not doing/requesting.
1. The mouse is jumping all over the screen or disappears all together.
2. The Battery Power Manager keeps showing up several times in a minute showing battery run times from normal to 6 moths run time.
3. A pop-up menu as if I clicked the home screen keeps popping up and going away by itself
4. Work spaces will cycle back and forth between each other.
5. If I go to the main lower left menu and try to open it it will not open. if it does open after several minutes of trying and I go to shut down,the laptop will not shut down instantly.It will take several minutes to recognize the command and then shut down.
6. The BIOS screens mouse is also abnormal in operation. It jumps all over the screen or goes away all together. I cannot get to the system info to post the version of LL.
I'm not sure if this is a LL software clinch or my laptop mouse pad has died? It was working normally last night and now no matter if I shut down and pull the battery for several minutes, the same problem is present.
I am not a computer expert by any means,but would like help with this problem please.