Linux Lite Forums

hi guys i try to active a wake onlan with last version of S.O. but not work , i activate a wakeonlan in bios , and after i have installed a wakeonlan software in linux but when run ethols return this

Code:
ethtool enp1s0
Settings for enp1s0:
	Supported ports: [ TP MII ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	Supported pause frame use: Symmetric Receive-only
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	Advertised pause frame use: Symmetric Receive-only
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Link partner advertised link modes:  10baseT/Half 10baseT/Full 
	                                     100baseT/Half 100baseT/Full 
	Link partner advertised pause frame use: Symmetric Receive-only
	Link partner advertised auto-negotiation: Yes
	Link partner advertised FEC modes: Not reported
	Speed: 100Mb/s
	Duplex: Full
	Port: MII
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
Cannot get wake-on-lan settings: Operation not permitted
	Current message level: 0x00000033 (51)
			       drv probe ifdown ifup
	Link detected: yes

anyone can help me ?? thankz

Sorry missed this. LL uses network manager. Use the deb wakeonlan package on your client and set for magic packet sending with nm-connection editor. Perhaps the link below will be of some help to you.

https://www.dbts-analytics.com/pxebtsshshtdn1.html

TC

faustf

trinidad