[faustf]

hi guys i try to active a wake onlan with last  version of S.O.  but not  work , i activate  a wakeonlan in bios  , and  after i have installed a wakeonlan software in linux  but  when run ethols  return this 

Code:

ethtool enp1s0 Settings for enp1s0: Supported ports: [ TP MII ] Supported link modes:  10baseT/Half 10baseT/Full                         100baseT/Half 100baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes:  10baseT/Half 10baseT/Full                         100baseT/Half 100baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes:  10baseT/Half 10baseT/Full                                     100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: on Cannot get wake-on-lan settings: Operation not permitted Current message level: 0x00000033 (51)       drv probe ifdown ifup Link detected: yes

anyone can help me ?? thankz

[trinidad]

Sorry missed this. LL uses network manager. Use the deb wakeonlan package on your client and set for magic packet sending with nm-connection editor. Perhaps the link below will be of some help to you.

https://www.dbts-analytics.com/pxebtsshshtdn1.html

TC