Hardware - Support > Video Cards
Nvivida card not found after upgrade
leegold:
--- Quote from: Valtam on March 23, 2014, 12:38:41 PM ---What video card do you have?
--- End quote ---
onboard is Intel 82845G. But the BIOS gives a choice of "Auto" or "onboard". It is set to "Auto" else this Intel chip will be used (and I do not like the intel chip). With "Auto" if there's another graphics adaptor in a PCI slot the PCI graphic card should be used.
In a PCI slot is Nvidia GeForce FX 5200. This is what I want to use and it seems LL looks but isn't finding it(?)
Jerry:
What video card do you have?
leegold:
--- Quote from: Valtam on March 22, 2014, 10:40:37 PM ---What connection to your monitor are you using, hdmi, vga, dvi etc?
--- End quote ---
the monitor has all those sockets but i use the vga.
the error message is like - nvidia interface not found.
The pc has an onboard video and sometimes that can confuse Linux maybe? But it was working fine till i tried to upgrade the driver via apt-get install
i have the bios set to not use the onboard card which is terrible.
dual boot XP works OK as I mentioned.
A live CD disk LL 1.08 boot with "start LL in safe graphics mode" boots to a usable good looking desktop. but not going F7 and just doing default boot option then the live disk boots to as black/blank screen just like the installed on hard drive LL 1.06.
I've tried reinstalling the driver. Maybe unadvisedly I saw a web page showing "Edge" repository with latest and greatest drivers and more...kernel too and I did that whole thing - no luck though.
Last resort I will wipe and reinstall LL completely if nothing fixes, but not until I try any recommendations first.
Thank you for time.
Jerry:
What connection to your monitor are you using, hdmi, vga, dvi etc?
leegold:
Hi,
I'm going from (my brain’s) memory since I can't really boot LL 1.06 now. I got a new monitor, a Neovo F-419. Dual booting XP and XP works OK with new monitor. When I booted LL the resolution was very low (icons were huge) and it worked but so big it was unusable. I have nvivida card so went into nvivida settings to increase resolutions but got a message within nvivida settings that it could not do that and said I should upgrade driver. I went into Synaptic and saw i was using driver 173 ver. I saw nvidia current as 304 and checked/installed that. LL booted to black/blank screen, I did see a message at some point while booting that nvidia video adapter was "not found".
I then rebooted into recovery mode with most recent I have kernel: 3.2.0. 60 generic-pae . I then tried "Drop to root shell" to maybe reinstall or try another nvidia driver, or something to fix(?). But when I did that it says "Give root password for Maintenance (or type Control-D to Continue):". Password or anything I've tried does not work here, cntrl-D just takes me back to recovery menu.
I'm at a dead end. What can I do?
Thanks.
Navigation
[0] Message Index
[*] Previous page
Go to full version