You are Here:
Linux Lite 6.6 FINAL Released - Support for 22 Languages Added - See Release Announcement Section



Logon Loop after last update

Author (Read 2615 times)

0 Members and 1 Guest are viewing this topic.

Re: Logon Loop after last update
« Reply #10 on: June 16, 2022, 07:40:11 PM »
 

Von Kirkus

  • New to Forums
  • *
  • 19
    Posts
  • Reputation: 0
    • View Profile

  • CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz

  • MEMORY: 8Gb

  • VIDEO CARD: Toshiba Satellite C55-B (Stock with SSD and 8Gb Upgrade)

  • Kernel: 5.x
My fix was to boot from a LL install USB stick and run Live. Then using the partitioning tool, I was able to shrink a 3rd "38GB" empty partition that I had to "10GB" and then expand the "90GB" Linux bootable partition that had filled to capacity and was bootlooped to a resized "118GB" partition. Then I used the Restore System program to get to a recent timeshift file and run it. Then shutdown, when prompted, removed the install USB, crossed my fingers and rebooted(not sure that helped, but it did reboot  :shrug :49: :027:) Back in LL all my files were still intact, ran a new timeshift file, then installed updates. Back in business. However, the 10GB partition that is now created doesn't have read/write permissions. How do I get that partition available for use if I wanted to put some files in that space? Thanks for all the great help and input. Link to partition info screenshot: https://imgur.com/iKv7hEN.png

Update: Since I had no data in the partition, I used the built in "Disks" program in Lite to remove the partition and then add it back and the program fixed the problem.
« Last Edit: June 17, 2022, 04:52:27 PM by Von Kirkus »
 

Re: Logon Loop after last update
« Reply #9 on: June 15, 2022, 03:42:20 PM »
 

stevef

  • Global Moderator
  • Gold Level Poster
  • *****
  • 777
    Posts
  • Reputation: 143
  • Linux Lite Member
    • View Profile

  • CPU: Intel Core i5-4460

  • MEMORY: 16Gb

  • Kernel: 5.x
Code: [Select]
df -hWill show file system space statistics. Look at the 'Used' and 'Available' numbers on the line with just '/' under 'Mounted on'.

If 'Available' is near zero then you do need to clear some space.
Unless you have a lot of personal data you can safely delete, one way to free some space may be by removing archive files left over from previous updates  by running the following commands.

Code: [Select]
sudo apt-get clean
Code: [Select]
sudo apt-get autoclean
Code: [Select]
sudo apt-get autoremove
Run 'df -h' again check free space and maybe try 'startx' again and see what happens.

If it works you need to check what state the system is in.  You may need to consider the size of the Linux partition.  If disk space is tight, using LiteTweaks to clear the caches regularly can preempt running out of space, but if you also want to save a lot of video data then you might need to change things.
clueless
 

Re: Logon Loop after last update
« Reply #8 on: June 15, 2022, 02:04:37 PM »
 

Von Kirkus

  • New to Forums
  • *
  • 19
    Posts
  • Reputation: 0
    • View Profile

  • CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz

  • MEMORY: 8Gb

  • VIDEO CARD: Toshiba Satellite C55-B (Stock with SSD and 8Gb Upgrade)

  • Kernel: 5.x
https://photos.app.goo.gl/kaQ7jR113XC16Xdc9

ok, this is what I get when I run startx  Will see if I can clean up some space. I added soem video files from a trip I took I was wanting to edit and make a presentation. Hope I haven't lost those.
 

Re: Logon Loop after last update
« Reply #7 on: June 15, 2022, 11:33:35 AM »
 

camarks

  • New to Forums
  • *
  • 1
    Posts
  • Reputation: 0
  • Linux Lite Member
    • View Profile

  • CPU: Intel(R) Celeron(R) CPU N3450

  • MEMORY: 8Gb

  • Kernel: 5.x
Your disk usage is at 100%. The update filled your drive and startup can't complete, thus the loop. Use the tools in the boot menu to free up some space. I've had to do it and it is annoying. I'm on here today to try to figure out why a "Lite" install has used all of my disk and what to do about it.
« Last Edit: June 15, 2022, 05:01:17 PM by camarks »
 

Re: Logon Loop after last update
« Reply #6 on: June 15, 2022, 11:17:36 AM »
 

Von Kirkus

  • New to Forums
  • *
  • 19
    Posts
  • Reputation: 0
    • View Profile

  • CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz

  • MEMORY: 8Gb

  • VIDEO CARD: Toshiba Satellite C55-B (Stock with SSD and 8Gb Upgrade)

  • Kernel: 5.x
Well, the goofyness, other than myself  :022: is that it took multiple attempts with the password to finally get the terminal window to run? Keyboard works flawless in Windows when I boot over to that OS. This SSD I'm afraid has become corrupted some how in a critical area. I haven't had time to troubleshoot the last few days. I have printed off your commands and will give it a whirl and let you know what I find. Thanks for all your help!
 

Re: Logon Loop after last update
« Reply #5 on: June 10, 2022, 05:29:23 PM »
 

stevef

  • Global Moderator
  • Gold Level Poster
  • *****
  • 777
    Posts
  • Reputation: 143
  • Linux Lite Member
    • View Profile

  • CPU: Intel Core i5-4460

  • MEMORY: 16Gb

  • Kernel: 5.x
I don't understand what is goofy.  That looks like you've logged on to the computer terminal as expected which is the starting point for fixing it.
There are a few ways forward.

Assuming you have some timeshift snapshots available and you didn't change anything significant in the timeshift set up you can simply restore your system to an earlier point.  This should get you a working system.  But it is possible you'll be in the same position again if it is the upgrade that caused the problem and we will need to try something different in that case.  If you do want to try just restoring the system to an earlier point skip to timeshift instructions below.

It might be worth trying a couple of diagnostic things now before restoring.  If these don't work, you can get back to the terminal as you've just done.

Firstly just try the command
Code: [Select]
startxThis will try to start the GUI on the computer.  This may just work but if it doesn't, record any error messages it generates.

Secondly check the log of the update which you think caused the problem.  Run the commands

Code: [Select]
cd /var
Code: [Select]
cd log
Code: [Select]
ls -l | grep llupdate
It should look someting like this
Quote
 stephen ~>cd /var
 stephen /var>cd log
 stephen /var/log>ls -l | grep llupdate
-rw-r--r--  1 root   root                404 Jun 10 05:14 llupdates.log
 stephen /var/log>

The 'ls' command should list the last update log file name.  If the file's date and time matches the time of your update when it all went wrong, then the command
Code: [Select]
cat llupdates.log | morewill show what the update was trying to do.  This may help in finding the cause.

I'm sure there'll be more to try, but it's getting late here and a lot depends on what you find if you run the commands above..


Timeshift Instructions

1) Make sure the timeshift archive is available - ie if you snapshot to a USB disk plug it in.
2) List available snapshots with
Code: [Select]
sudo timeshift --listThis should show you available snapshots with the date and time they were made. 
3) If you are happy with one of them enter
Code: [Select]
sudo timeshift --restoreThis should list the available snapshots again and ask you which one to restore.  Follow the prompts accepting the defaults and recommendations.




clueless
 

Re: Logon Loop after last update
« Reply #4 on: June 10, 2022, 02:38:25 PM »
 

Von Kirkus

  • New to Forums
  • *
  • 19
    Posts
  • Reputation: 0
    • View Profile

  • CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz

  • MEMORY: 8Gb

  • VIDEO CARD: Toshiba Satellite C55-B (Stock with SSD and 8Gb Upgrade)

  • Kernel: 5.x
Something is goofy. After several attempts I can get to the terminal in photo. Keyboard works fine in Windows. What do you suggest I try from here? Any help appreciated.

https://photos.app.goo.gl/UQpR4mdeSB9uXNyc8
 

Re: Logon Loop after last update
« Reply #3 on: June 10, 2022, 01:11:02 PM »
 

Von Kirkus

  • New to Forums
  • *
  • 19
    Posts
  • Reputation: 0
    • View Profile

  • CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz

  • MEMORY: 8Gb

  • VIDEO CARD: Toshiba Satellite C55-B (Stock with SSD and 8Gb Upgrade)

  • Kernel: 5.x
Quote from: stevef link=topic=8747.msg58519.1654849722
There was a recent new kernel for LL 5.x.  Do you recall if the update required a reboot ?

Instead of using the normal logon, press Alt Ctrl and F2 to get to a terminal logon.  Use your normal credentials to log on.  If this works, we can try to work out what to do next.

Do you have any recent timeshift snapshots ?
I don't think it did require a reboot, I should have some timeshifts if I can get logged in. Will try the terminal logon and update. Thanks for the info.
 

Re: Logon Loop after last update
« Reply #2 on: June 10, 2022, 04:28:42 AM »
 

stevef

  • Global Moderator
  • Gold Level Poster
  • *****
  • 777
    Posts
  • Reputation: 143
  • Linux Lite Member
    • View Profile

  • CPU: Intel Core i5-4460

  • MEMORY: 16Gb

  • Kernel: 5.x
There was a recent new kernel for LL 5.x.  Do you recall if the update required a reboot ?

Instead of using the normal logon, press Alt Ctrl and F2 to get to a terminal logon.  Use your normal credentials to log on.  If this works, we can try to work out what to do next.

Do you have any recent timeshift snapshots ?
clueless
 

Logon Loop after last update
« Reply #1 on: June 09, 2022, 03:59:44 PM »
 

Von Kirkus

  • New to Forums
  • *
  • 19
    Posts
  • Reputation: 0
    • View Profile

  • CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz

  • MEMORY: 8Gb

  • VIDEO CARD: Toshiba Satellite C55-B (Stock with SSD and 8Gb Upgrade)

  • Kernel: 5.x
When I enter my password, (the correct one) at the logon screen, the Toshiba splash screen appears and then just loops back to the logon screen  :banghead I've tried rebooting into recovery mode and so forth, but it's not fixing it. How can I get this reconfigured?
 

 

-->
X Close Ad

Linux Lite 6.6 FINAL Released - Support for 22 Languages Added - See Release Announcement Section