Linux Lite Forums

Software - Support => Tutorials => Topic started by: Jerry on December 17, 2019, 02:53:37 AM

Title: Lightscribe - How to on Linux Lite
Post by: Jerry on December 17, 2019, 02:53:37 AM

(https://dl1.cbsistatic.com/i/2016/07/18/e5042e16-e9a1-4200-800b-9c4f8195656a/422080b92311017d429a5e2c737b1035/imgingest-4616560661501171126.png)

For those that have LightScribe DVD writers, the following should work.
FYI - this is a combination of many tutorials that I have poured over for hours to get to this point and to make everything work as it should, with a lot of customization.

Code: [Select]

wget https://www.linuxliteos.com/files/lightscribe/4l_1.0-r6_i386.deb
wget https://www.linuxliteos.com/files/lightscribe/lightscribe-1.18.27.10-linux-2.6-intel.deb
wget https://www.linuxliteos.com/files/lightscribe/lightscribeApplications-1.18.15.1-linux-2.6-intel.deb

Code: [Select]

sudo dpkg -i *.deb
sudo apt-get install -f
Now to check if everything went to plan, you should get a readout from:

Code: [Select]

4L-cli enumerate
similar to:

Code: [Select]

Using /etc/lightscribe.rc
Drive path: /dev/sr0
Usable: 1
Full name: hp DVD-RAM GH60L RD01 217
Model: DVD-RAM GH60L   
Manufacturer: hp     
Capabilities: monochrome
Drive inner radius: 21000
Drive outer radius: 58700
Then look in, Menu, Multimedia, Lightscribe Labeler.