Linux Lite Forums
Hardware - Support => Start up and Shutdown => Topic started by: OptiPlex on November 06, 2022, 10:07:06 AM
-
Hello Friends,
please check my initial updated post. The system wont boot because of plymouth service. Can i somehow work around it? only thing that helps is shutdown by pressing power button and trying to start it again until system boots.
(https://i.ibb.co/d0jS5zn/IMG-20221106-155057627-HDR.jpg) (https://ibb.co/d0jS5zn)
-
https://wiki.ubuntu.com/Plymouth
Remove "quiet splash" from /etc/default/grub. Update grub, shutdown and boot. If boot pauses you may be prompted to hit space bar or any key to continue. Should work if plymouth is the problem. "nomodeset" should not be neccessary. Look at the other options in Plymouth as you may want fsck progress messages displayed.
TC
-
This needs to be split into 2 separate topics.
-
Hello friends, quiet splash removed. Now i see a wall of text. Did 6 reboots and all of them went to the graphic desktop environent. It may take few more attempts before problém appears again (if).
Just to clarify both nomodeset and plymouthd are part of the same problem. Just different approaches based off recommendations.
-
Here is the error: computer have not booted (https://i.ibb.co/ZgJkFHJ/IMG-20221109-WA0000.jpg) (https://ibb.co/ZgJkFHJ)
-
Here is the error: computer have not booted [...]
Hi! :)
Check the first line in the image:
It says "Failed to start casper-md5check Verify Live ISO checksums."
That means:
1. Either you are using an optical media (CD/DVD) which is faulty (writing errors) OR
2. The ISO file you downloaded, got somehow damaged (interrupted download, or whatever).
3. The USB medium you used, has bad sectors and the result of writing the image, is corrupted.
Two options here:
1. Redownload the ISO file;
2. Re-write the boot media (CD/DVD, USB Stick).
After that, reboot the system using the new media, to see what happens.
Choose the Live version, then install from within the Live Linux Lite.
3. For safer writing, use Gnome Disks to check the USB. Perform a benchmark and see what writing speed you get.
If the medium is damaged, the benchmark might fail at some point.
Good luck! :)
-
I think the message about casper-md5check failing to start can safely be ignored. It is not relevant once the software has been installed.
Does the job to raise the network complete or fail if you leave it long enough ?
-
Does the job to raise the network complete or fail if you leave it long enough ?
I have never bothered to wait more than 5 minutes. Just powered down the computer as we have very limited time we can spend on a computer. So we powered down and on again until we reached desktop environment.
If it makes any difference, could we follow a logical route a) computer boots up after 10 minutes - proposed fix,
b) computer stays on that screen until powered down.
I have a PCE Asus WiFi Card.
-
It looks to me like the computer may be waiting for DHCP to allocate network setting.
The default DHCP timeout is 300 seconds which is an odd value. If DHCP is going to work it should complete quickly. If DHCP can't complete then waiting 300 seconds doesn't really add any value.
Depending on your set up, there are things to try to eliminate DHCP as being a cause.
1) Investigate DHCP operation - this would be my preference but will require time and effort in diagnostics like checking logs, changing the default settings, checking your wifi adaptor etc. If you have limited time to spend, this may not suit you.
2) If it is in a fixed environment, give the machine a fixed network setting to eliminate DHCP as being the cause.
Sorry, I don't understand what you mean by your a) and b) routes.
-
fellow lite users,
i have tried DHCP perma setting to no avail.
today I have applied following patches to grub: returned back to nomodeset, disabled plymouth and in terminal disabled wait for networking services service.
did about a dozen of starts and all of them went to desktop environment just fine, so fingers crossed.