Hardware - Support > Start up and Shutdown

[SOLVED] Lite hangs at boot I know what it is - USB KVM switch

(1/2) > >>

DLX:
I never got round to fixing this was down to old hardware. I just pulled the UBS KVM out till I got boot screen with bar at bottom of page when bar was half way plug USB back in.

Using different computer now, still 14 years old

Scott:
Hi Dyslexic1,
I've had issues in the past with a KVM switch on Windows equipment. I'll look to see if those issues apply to this problem. Please post the make and model of the KVM switch you're using.  Thanks.
~Scott

DLX:
I got a work round in the end :D I got another old computer D530 HP.
It see the KVM but I can't get sound to work I got a list of bit I got to look at and try before asking.

Had Linux lit on this comuper for a bit of time now don't know how long but seems to be getting slow. If it was a Win box then I know what to do defrag but I did rad there not such thing with Linux.


Thanks

Scott:
Hi Dyslexic1,
Please post the make and model of the KVM switch you're using.  Thanks.

gold_finger:
dayooper,

Is this immediately after a new install?  Or is this a problem that just popped up along the way after working fine for a while?

Are you using a KVM switch like the original poster of this thread?

Do you have any other operating systems on the computer, or is LL the only one?  If you do have another, can you still boot into it?

If you can, boot into installed LL on hard drive.  If not, boot with live CD/USB.  Either way, open a terminal and enter following commands:


--- Code: ---sudo apt-get update
sudo apt-get install inxi
inxi -Fxz
sudo parted -l

--- End code ---
(Last command ends in a lowercase letter "L", not a number 1.)

Copy entire output from last two commands.  Hit the "Insert Code" button on the forum reply interface (top right, 3rd button in), then paste the output within the code box that appears.

Navigation

[0] Message Index

[#] Next page