You are Here:
Download Linux Lite 5.6 Final today - See Release Announcements



X Close Ad
X Close Ad
[ SOLVED ] libasound2 not working after update

Author (Read 2513 times)

0 Members and 5 Guests are viewing this topic.

libasound2 not working after update
« on: May 06, 2021, 03:28:46 PM »
 

j8a

  • New to Forums
  • *
  • 34
    Posts
  • Country: ar
  • Reputation: 3
  • Linux Lite Member

  • Linux Lite: 5.4 64bit

  • CPU: AMD FX-8320E Buldozer

  • MEMORY: 8Gb

  • VIDEO CARD: NVIDIA C61 [GeForce 7025 / nForce 630a]

  • Kernel: 5.x
Hi,
Today I did an update, Thunderbird was updated.
Then, I realize that the sound is lost, the volume control pops up frequently, whether I check the configuration in the Manual and run alsamixer I have no idea what is happening.
I upload the report of my system in order to recieve any help.
I could see the sound in the audio control panel and also while I run a test in the terminal with the command:
speaker-test -c 2


Regards
Last Edit: June 07, 2021, 11:00:55 AM by j8a
 


Re: libasound2 not working after update
« Reply #1 on: May 07, 2021, 09:25:46 AM »
 

j8a

  • New to Forums
  • *
  • 34
    Posts
  • Country: ar
  • Reputation: 3
  • Linux Lite Member

  • Linux Lite: 5.4 64bit

  • CPU: AMD FX-8320E Buldozer

  • MEMORY: 8Gb

  • VIDEO CARD: NVIDIA C61 [GeForce 7025 / nForce 630a]

  • Kernel: 5.x
I recieved the updates attached today.
I did try to listen mp3 files with vlc, but I have no success.
I also check the audio on the speakers with another pc, I can hear videos and audio without problems.

I booted on a different kernel BTW, but nothing happened.

That's all for today, regards.
 

Re: libasound2 not working after update
« Reply #2 on: May 07, 2021, 11:30:18 AM »
 

j8a

  • New to Forums
  • *
  • 34
    Posts
  • Country: ar
  • Reputation: 3
  • Linux Lite Member

  • Linux Lite: 5.4 64bit

  • CPU: AMD FX-8320E Buldozer

  • MEMORY: 8Gb

  • VIDEO CARD: NVIDIA C61 [GeForce 7025 / nForce 630a]

  • Kernel: 5.x
I also tried to boot on live LL 5.0 and the same problem continues.

Then, under LL 5.4 I run journalctl -f and the following message appeared:

jochoa-pc pulseaudio[2275]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply.
Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply,
the reply timeout expired, or the network connection was broken.jochoa-pc pulseaudio[2275]: GetManagedObjects()
failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply,
the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

I could not saw any messages running journalctl -f whether I tried to play either a mp3 music track or a Youtube video.

I also run lsmod | grep video and lsmod | grep audio and the terminal outputs where the following:

lsmod | grep audio
ledtrig_audio          16384  2 snd_hda_codec_generic,snd_hda_codec_realtek

lsmod | grep video
video                  49152  1 nouveau

Hope this help, regards.
 

Re: libasound2 not working after update
« Reply #3 on: May 10, 2021, 08:04:20 AM »
 

TheDead

  • Gold Level Poster
  • *******
  • 913
    Posts
  • Country: ca
  • Reputation: 79
  • Linux Lite Worshipper
    • My OpenDesktop Projects

  • Linux Lite: 4.8 64bit

  • CPU: HAL9000

  • MEMORY: 2Gb

  • VIDEO CARD: Quantum State VR v.3

  • Kernel: 4.x
Hi!
Could be old news since I used this in 4.x, but...
If you have your monitor in HDMI, it could be that the output tries to go there, check in the audio outputs that the right one is selected.
You could also try this... when everything is closed, open a terminal and do : sudo pulseaudio -k (or --k, can't remember) to "kill" the audio outputs, running an application after should restart this process automatically.
- TheDead (TheUxNo0b)

If my blabbering was helpful, please click my [Thank] link.
 

Re: libasound2 not working after update
« Reply #4 on: May 10, 2021, 09:38:02 AM »
 

j8a

  • New to Forums
  • *
  • 34
    Posts
  • Country: ar
  • Reputation: 3
  • Linux Lite Member

  • Linux Lite: 5.4 64bit

  • CPU: AMD FX-8320E Buldozer

  • MEMORY: 8Gb

  • VIDEO CARD: NVIDIA C61 [GeForce 7025 / nForce 630a]

  • Kernel: 5.x
Hi @TheDead ,
Thank you for your answer.

I tried sudo pulseaudio -k and the following message apperared.
 [pulseaudio] main.c: The daemon could not be stopped. The process does not exists.

I also tried,
systemctl status pulseaudio-enable-autospawn.service
● pulseaudio-enable-autospawn.service
     Loaded: masked (Reason: Unit pulseaudio-enable-autospawn.service is masked>
     Active: inactive (dead)

At last I run,
journalctl -f -t pulseaudio and the following message appeared:
may 10 09:23:23 jochoa-pc pulseaudio[2251]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

I have PolicyKit Authentication Agent enable in the Session and Startup section under autostart commands, while the system is booting.
I also the following autostart commands in this panel.
System Sound Pulse Audio
Login Sound (which I can not hear anymore)



Regards
Last Edit: May 10, 2021, 10:03:18 AM by j8a
 

Re: libasound2 not working after update
« Reply #5 on: May 10, 2021, 10:08:43 AM »
 

j8a

  • New to Forums
  • *
  • 34
    Posts
  • Country: ar
  • Reputation: 3
  • Linux Lite Member

  • Linux Lite: 5.4 64bit

  • CPU: AMD FX-8320E Buldozer

  • MEMORY: 8Gb

  • VIDEO CARD: NVIDIA C61 [GeForce 7025 / nForce 630a]

  • Kernel: 5.x
Hi, @TheDead, you were right about the external monitor, you made me tought that there is something missing on my BIOS configuration and at last I remember what is it.
I am ashamed because I ckeck the BIOS settings and i have the video and sound card in PCI instead of on board, because I tried to install another video card unsuccessfully and forgot to change this setting.

Although the change was fine and the output of
sudo pulseaudio --kill whas done, the problem persist with the audio.

This is the output of the the following terminal command:
pulseaudio --dump-conf
### Leyendo desde el archivo de confioguración: /etc/pulse/daemon.conf ###
daemonize = no
fail = yes
high-priority = yes
nice-level = -11
realtime-scheduling = yes
realtime-priority = 5
allow-module-loading = yes
allow-exit = yes
use-pid-file = yes
system-instance = no
local-server-type = user
cpu-limit = no
enable-shm = yes
flat-volumes = no
rescue-streams = yes
lock-memory = no
exit-idle-time = 20
scache-idle-time = 20
dl-search-path = /usr/lib/pulse-13.99.1/modules
default-script-file = /etc/pulse/default.pa
load-default-script-file = yes
log-target =
log-level = notice
resample-method = auto
avoid-resampling = no
enable-remixing = yes
remixing-use-all-sink-channels = yes
remixing-produce-lfe = no
remixing-consume-lfe = no
lfe-crossover-freq = 0
default-sample-format = s16le
default-sample-rate = 44100
alternate-sample-rate = 48000
default-sample-channels = 2
default-channel-map = front-left,front-right
default-fragments = 4
default-fragment-size-msec = 25
enable-deferred-volume = yes
deferred-volume-safety-margin-usec = 1
deferred-volume-extra-delay-usec = 0
shm-size-bytes = 0
log-meta = no
log-time = no
log-backtrace = 0
rlimit-fsize = -1
rlimit-data = -1
rlimit-stack = -1
rlimit-core = -1
rlimit-rss = -1
rlimit-as = -1
rlimit-nproc = -1
rlimit-nofile = 256
rlimit-memlock = -1
rlimit-locks = -1
rlimit-sigpending = -1
rlimit-msgqueue = -1
rlimit-nice = 31
rlimit-rtprio = 9
rlimit-rttime = 200000

The other output I posted above are valid.

I could add the output of the comand lspci -v
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
   Subsystem: ASRock Incorporation MCP61 High Definition Audio
   Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21, NUMA node 0
   Memory at efdf8000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: snd_hda_intel
   Kernel modules: snd_hda_intel

Regards,
Last Edit: May 10, 2021, 10:20:07 AM by j8a
 

Re: libasound2 not working after update
« Reply #6 on: May 14, 2021, 11:46:51 AM »
 

j8a

  • New to Forums
  • *
  • 34
    Posts
  • Country: ar
  • Reputation: 3
  • Linux Lite Member

  • Linux Lite: 5.4 64bit

  • CPU: AMD FX-8320E Buldozer

  • MEMORY: 8Gb

  • VIDEO CARD: NVIDIA C61 [GeForce 7025 / nForce 630a]

  • Kernel: 5.x
Hi,
I found the issue for my audio card, after a couple of weeks the libasound2 package was updated and since the I lost the output sound.

I tried to downgrade the package but I recieve a message that I have broken dependencies unmet.

Afterwards, I installed libasound2-dev and run a program suggested by the website https://www.freedesktop.org/wiki/Software/PulseAudio/Backends/ALSA/BrokenDrivers/

I followed the instructions and send the report. I tried my best.

Regards
 

Re: libasound2 not working after update
« Reply #7 on: May 14, 2021, 07:22:46 PM »
 

Moltke

  • Platinum Level Poster
  • **********
  • 1033
    Posts
  • Country: ve
  • Reputation: 120
  • Linux Lite Member

  • Linux Lite: 5.0 64bit

  • CPU: amd athlon 64 x2

  • MEMORY: 4Gb

  • VIDEO CARD: amd radeon hd 6750

  • Kernel: 5.x
Hi @TheDead ,
Thank you for your answer.

I tried sudo pulseaudio -k and the following message apperared.
 [pulseaudio] main.c: The daemon could not be stopped. The process does not exists.

There's no need to run this command with sudo
Code: [Select]
pulseaudio -k and then
Code: [Select]
pulseaudio --start will do just fine, pulseaudio is a user's service not a system's one, thus it can be managed by your user without sudo.

Quote
I also tried,
systemctl status pulseaudio-enable-autospawn.service
● pulseaudio-enable-autospawn.service
     Loaded: masked (Reason: Unit pulseaudio-enable-autospawn.service is masked>
     Active: inactive (dead)

Here, you're just asking systemd for the status of the service, and it has no effect on it, in short, it is an informative command to query whether a service is enabled, disabled, running, active, loaded, dead, inactive, but it doesn't change its status or solve anything. BTW, that service is masked for a reason, meaning it is disabled by default, and you should leave it as is. What you probably want to do here is
Code: [Select]
systemctl --user restart pulseaudio.service Read man systemctl and here https://wiki.archlinux.org/title/Systemctl

Quote
At last I run,
journalctl -f -t pulseaudio and the following message appeared:
may 10 09:23:23 jochoa-pc pulseaudio[2251]: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.


Regards

This one should be run either as root or with sudo
Code: [Select]
sudo journalctl -f -t pulseaudio since the dir where it gets the input /var/log it's owned by root, otherwise you get that error.  Read here https://wiki.archlinux.org/title/Systemd/Journal

What's the output of
Code: [Select]
pactl info this should tell you whether pulseaudio is running or not.
Without each others help there ain't no hope for us :)
Need a translation service? https://www.deepl.com/es/translator
 

Re: libasound2 not working after update
« Reply #8 on: May 15, 2021, 11:20:59 AM »
 

j8a

  • New to Forums
  • *
  • 34
    Posts
  • Country: ar
  • Reputation: 3
  • Linux Lite Member

  • Linux Lite: 5.4 64bit

  • CPU: AMD FX-8320E Buldozer

  • MEMORY: 8Gb

  • VIDEO CARD: NVIDIA C61 [GeForce 7025 / nForce 630a]

  • Kernel: 5.x
Hi @Moltke ,
Thank you for answer my question.
The problem is described in the following post:
https://wiki.archlinux.org/title/PulseAudio/Troubleshooting#Pulse_overwrites_ALSA_settings

Daemon is already running.
Pulseaudio maybe started by multiple times.
I checked the files but I have no idea on what I have to change in order to solve the problem.
I wish whether you could help me to fix the problem.

Regards,
 

Re: libasound2 not working after update
« Reply #9 on: May 15, 2021, 01:00:58 PM »
 

Moltke

  • Platinum Level Poster
  • **********
  • 1033
    Posts
  • Country: ve
  • Reputation: 120
  • Linux Lite Member

  • Linux Lite: 5.0 64bit

  • CPU: amd athlon 64 x2

  • MEMORY: 4Gb

  • VIDEO CARD: amd radeon hd 6750

  • Kernel: 5.x
Hi @Moltke ,
Thank you for answer my question.
The problem is described in the following post:
https://wiki.archlinux.org/title/PulseAudio/Troubleshooting#Pulse_overwrites_ALSA_settings

Daemon is already running.
Pulseaudio maybe started by multiple times.
I checked the files but I have no idea on what I have to change in order to solve the problem.
I wish whether you could help me to fix the problem.

Regards,

What's the output of
Code: [Select]
pactl info run that in a terminal and copy/paste the output here.
Without each others help there ain't no hope for us :)
Need a translation service? https://www.deepl.com/es/translator
 

Re: libasound2 not working after update
« Reply #10 on: May 17, 2021, 09:53:42 AM »
 

j8a

  • New to Forums
  • *
  • 34
    Posts
  • Country: ar
  • Reputation: 3
  • Linux Lite Member

  • Linux Lite: 5.4 64bit

  • CPU: AMD FX-8320E Buldozer

  • MEMORY: 8Gb

  • VIDEO CARD: NVIDIA C61 [GeForce 7025 / nForce 630a]

  • Kernel: 5.x
Hi @Moltke ,
I will try these in a few days, we have experienced a covid case at work and I can not go to the office right now.
I will contact you as soon as I can go back to work, I hope it will be soon. Fortunately, I am all right and so my colleagues.

Regards
 

Re: libasound2 not working after update
« Reply #11 on: May 17, 2021, 12:23:36 PM »
 

Moltke

  • Platinum Level Poster
  • **********
  • 1033
    Posts
  • Country: ve
  • Reputation: 120
  • Linux Lite Member

  • Linux Lite: 5.0 64bit

  • CPU: amd athlon 64 x2

  • MEMORY: 4Gb

  • VIDEO CARD: amd radeon hd 6750

  • Kernel: 5.x
Hi @Moltke ,
I will try these in a few days, we have experienced a covid case at work and I can not go to the office right now.
I will contact you as soon as I can go back to work, I hope it will be soon. Fortunately, I am all right and so my colleagues.

Regards

Sure, no problem. Glad you're Ok, take care. By the way, I see you're from Argentina? You can also post in the Spanish sub-forum https://www.linuxliteos.com/forums/spanish/
Without each others help there ain't no hope for us :)
Need a translation service? https://www.deepl.com/es/translator
 

Re: libasound2 not working after update
« Reply #12 on: May 26, 2021, 08:41:09 AM »
 

j8a

  • New to Forums
  • *
  • 34
    Posts
  • Country: ar
  • Reputation: 3
  • Linux Lite Member

  • Linux Lite: 5.4 64bit

  • CPU: AMD FX-8320E Buldozer

  • MEMORY: 8Gb

  • VIDEO CARD: NVIDIA C61 [GeForce 7025 / nForce 630a]

  • Kernel: 5.x
Hi, @Moltke ,
The ouptput of the pactl info command is the following_

pactl info
Error en la conexión: Conexión negada
pa_context_connect() falló: Conexión negada

I include also, the output of these other terminal commands, which could help
ournalctl --user -xe | grep pulseaudio.service
may 14 13:34:04 jochoa-pc systemd[2234]: pulseaudio.service: Succeeded.
may 14 14:28:51 jochoa-pc systemd[2260]: pulseaudio.service: Succeeded.
may 14 15:49:50 jochoa-pc systemd[2864]: pulseaudio.service: Succeeded.
may 14 16:25:35 jochoa-pc systemd[1024]: pulseaudio.service: Succeeded.
may 26 09:33:39 jochoa-pc systemd[2070]: pulseaudio.service: Succeeded.
may 26 09:33:44 jochoa-pc systemd[2070]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
may 26 09:33:44 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.
may 26 09:33:44 jochoa-pc systemd[2070]: pulseaudio.service: Scheduled restart job, restart counter is at 1.
may 26 09:33:44 jochoa-pc systemd[2070]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
may 26 09:33:44 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.
may 26 09:33:44 jochoa-pc systemd[2070]: pulseaudio.service: Scheduled restart job, restart counter is at 2.
may 26 09:33:44 jochoa-pc systemd[2070]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
may 26 09:33:44 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.
may 26 09:33:45 jochoa-pc systemd[2070]: pulseaudio.service: Scheduled restart job, restart counter is at 3.
may 26 09:33:45 jochoa-pc systemd[2070]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
may 26 09:33:45 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.
may 26 09:33:45 jochoa-pc systemd[2070]: pulseaudio.service: Scheduled restart job, restart counter is at 4.
may 26 09:33:45 jochoa-pc systemd[2070]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
may 26 09:33:45 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.
may 26 09:33:45 jochoa-pc systemd[2070]: pulseaudio.service: Scheduled restart job, restart counter is at 5.
may 26 09:33:45 jochoa-pc systemd[2070]: pulseaudio.service: Start request repeated too quickly.
may 26 09:33:45 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.
may 26 09:34:20 jochoa-pc systemd[2070]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
may 26 09:34:20 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.
may 26 09:34:20 jochoa-pc systemd[2070]: pulseaudio.service: Scheduled restart job, restart counter is at 1.
may 26 09:34:20 jochoa-pc systemd[2070]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
may 26 09:34:20 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.
may 26 09:34:20 jochoa-pc systemd[2070]: pulseaudio.service: Scheduled restart job, restart counter is at 2.
may 26 09:34:20 jochoa-pc systemd[2070]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
may 26 09:34:20 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.
may 26 09:34:21 jochoa-pc systemd[2070]: pulseaudio.service: Scheduled restart job, restart counter is at 3.
may 26 09:34:21 jochoa-pc systemd[2070]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
may 26 09:34:21 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.
may 26 09:34:21 jochoa-pc systemd[2070]: pulseaudio.service: Scheduled restart job, restart counter is at 4.
may 26 09:34:21 jochoa-pc systemd[2070]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
may 26 09:34:21 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.
may 26 09:34:21 jochoa-pc systemd[2070]: pulseaudio.service: Scheduled restart job, restart counter is at 5.
may 26 09:34:21 jochoa-pc systemd[2070]: pulseaudio.service: Start request repeated too quickly.
may 26 09:34:21 jochoa-pc systemd[2070]: pulseaudio.service: Failed with result 'exit-code'.

And,

() falló: Conexión negada
 jochoa  ~  1  pulseaudio -vvv
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operación no permitida
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operación no permitida
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 13.99.1
D: [pulseaudio] main.c: Compilation host: x86_64-pc-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -g -O2 -fdebug-prefix-map=/build/pulseaudio-iKJeff/pulseaudio-13.99.1=. -fstack-protector-strong -Wformat -Werror=format-security -Wall -W -Wextra -pipe -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
D: [pulseaudio] main.c: Running on host: Linux x86_64 5.4.0-73-generic #82-Ubuntu SMP Wed Apr 14 17:39:42 UTC 2021
D: [pulseaudio] main.c: Found 8 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Running from build tree: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is 55b959beaf3c4e8c885de71ed85401c1.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/jochoa/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-13.99.1/modules.
I: [pulseaudio] main.c: Running in system mode: no
E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: Ha fallado pa_pid_file_create().

I have ~.asoundrc as this
cat .asoundrc
pcm.!default {
        type hw
        card 0
}

ctl.!default {
        type hw           
        card 0
}

At last, when I tried to enable autosparm.service the answer is:
systemctl enable pulseaudio-enable-autospawn.service
Synchronizing state of pulseaudio-enable-autospawn.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install enable pulseaudio-enable-autospawn
Failed to enable unit: Unit file /lib/systemd/system/pulseaudio-enable-autospawn.service is masked.


Where could be any problem?

Regards
Last Edit: May 26, 2021, 09:09:35 AM by j8a
 

Re: libasound2 not working after update
« Reply #13 on: May 26, 2021, 09:10:22 AM »
 

TheDead

  • Gold Level Poster
  • *******
  • 913
    Posts
  • Country: ca
  • Reputation: 79
  • Linux Lite Worshipper
    • My OpenDesktop Projects

  • Linux Lite: 4.8 64bit

  • CPU: HAL9000

  • MEMORY: 2Gb

  • VIDEO CARD: Quantum State VR v.3

  • Kernel: 4.x
Saw thread was marked solved and was curious... but it's not :-S

Got two ideas :
1. Try to install the Hardware Enablement pack.
2. Turning off the audio card in BIOS, booting once, then turning back on and rebooting. Pretty sure this procedure would be useless but... trying stuff in Linux ;)
- TheDead (TheUxNo0b)

If my blabbering was helpful, please click my [Thank] link.
 

Re: libasound2 not working after update
« Reply #14 on: May 26, 2021, 09:54:17 AM »
 

j8a

  • New to Forums
  • *
  • 34
    Posts
  • Country: ar
  • Reputation: 3
  • Linux Lite Member

  • Linux Lite: 5.4 64bit

  • CPU: AMD FX-8320E Buldozer

  • MEMORY: 8Gb

  • VIDEO CARD: NVIDIA C61 [GeForce 7025 / nForce 630a]

  • Kernel: 5.x
Hi @TheDead,
I unmark the post now, I though it will have no responses but @Moltke asked me a question about this and now you too.
I installed HWE support and the output from the terminal command line is the following:

hwe-support-status --verbose
Your Hardware Enablement Stack (HWE) is supported until abril 2025

I rebooted and disabled the sound from the BIOS. Afterwards, I reboot and enabled it.
In both cases the sound is still missing, the output I wrote are the same.  It is a weird problem.
 
The only thing is changed is that now, the output of pactl info is the following.

pactl info
Cadena de servidor: /run/user/1000/pulse/native
Versión de protocolo de biblioteca: 33
Versión de protocolo de servidor: 33
Es local: sí
Índice de cliente: 33
Tamaño de grupo: 65472
Nombre de usuario: jochoa
Nombre del equipo: jochoa-pc
Nombre del servidor: pulseaudio
Versión del servidor: 13.99.1
Especificación de muestra por defecto: s16le 2ch 44100Hz
Mapa de canal por defecto: front-left,front-right
Destino por defecto: alsa_output.pci-0000_00_05.0.analog-stereo
Fuente por defecto: alsa_input.usb-KYE_Systems_Corp._FaceCam_VGA-02.mono-fallback
Cookie: 4084:51ac


Regards,
Last Edit: May 26, 2021, 10:18:26 AM by j8a
 


Tags: sound 
 

X Close Ad
X Close Ad

Download Linux Lite 5.6 Final today - See Release Announcements