(10-04-2020, 12:57 PM)penglix link Wrote: Hello,
I have the same problem. However, I don't understand your solution. Can you help me?
Thank you!
[member=37195]penglix[/member]
Know that this solution is for....
Intel i915 onboard chip
The OP suggests creating a file named
20-intel.conf in the directory
/usr/share/X11/xorg.conf.d
If you were to do this from the terminal; you could vi a new file, most likely needing sudo to do so...
Code:
sudo vi /usr/share/X11/xorg.conf.d/20-intel.conf
then insert (press i ) and paste (right click) the following into that screen...
Code:
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
Option "TearFree" "true"
Option "DRI" "3"
EndSection
then press... ESC followed by :wq the :wq will write the file -- the :wq will display at the lower left corner - if in line with the text you need to delete the :wq and ESC prior..
then as instructed ... reboot..
Again, this is for the i915 chip - the instruction may not work for you if not the same, though it may or it may not display all..
* I would create a backup as a safety line...
And know how to access the TTY if you boot to blank screen then it'll be command lines to undo...