07-23-2019, 09:57 PM
(This post was last modified: 12-02-2019, 01:58 AM by firenice03.)
Ok i have place at this old p4 optiplex 745 a agp video card
it shows fine with windows. BUT with linux lite 3.8 32bits it shows 256 but the card is 512
here is some info *-display
description: VGA compatible controller
product: Cedar [Radeon HD 5000/6000/7350/8350 Series]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:27 memory:d0000000-dfffffff memory:fe9e0000-fe9fffff ioport:dc00(size=256) memory:fea00000-fea1ffff
Is there any work around to make it to what it is?? Or do i need a better one.arxontas
it shows fine with windows. BUT with linux lite 3.8 32bits it shows 256 but the card is 512
here is some info *-display
description: VGA compatible controller
product: Cedar [Radeon HD 5000/6000/7350/8350 Series]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:27 memory:d0000000-dfffffff memory:fe9e0000-fe9fffff ioport:dc00(size=256) memory:fea00000-fea1ffff
Is there any work around to make it to what it is?? Or do i need a better one.arxontas