Posts: 17
Threads: 6
Joined: Apr 2015
Reputation:
0
I thought I set my keyboard up as UK during the install however certain key presses give the wrong results. Pressing the @ key gives " and vice verse. There may be others that I haven't noticed. How can I reset to the UK keyboard driver?
Thanks.
Dave.
Posts: 1,486
Threads: 96
Joined: Mar 2014
Reputation:
0
Hi,
If you go to
Menu >
All and select
Language Support
((you may get a prompt about Language not being fully installed, select O.K))
You should get a screen like below:
((not 100% obvious what to do until you get to this scree, then it tells you))
![[Image: MniosCD.png]](http://i.imgur.com/MniosCD.png)
((The instruction can be overlooked)), but...
If you click on, and hold "
English (United Kingdom)"
You can "
Drag & Drop" it to the top of the list.
Then click on "
Apply System-Wide"
"
Re-boot", hopefully that should work.
Dave
Upgrades WIP 2.6 to 2.8 - (6 X 2.6 to 2.8 completed on: 20/02/16 All O.K )
Linux Lite 3.0 Humming on a ASRock N3070 Mobo ~ btrfs RAID 10 Install on 4 Disks :)
Computers Early days:
ZX Spectrum(1982) , HP-150 MS-DOS(1983) , Amstrad CPC464(1984) , BBC Micro B+64(1985) , My First PC HP-Vectra(1987)
(This post was last modified: 04-07-2015, 10:34 PM by
Wirezfree.)
Posts: 17
Threads: 6
Joined: Apr 2015
Reputation:
0
Thanks Wirezfree unfortunately that didn't work. However I just had five minutes messing with the language support and keyboard settings and everything now seems ok. :)
Dave.
Posts: 1,486
Threads: 96
Joined: Mar 2014
Reputation:
0
O.K,
At least you have sorted it...
Enjoy LL
Dave
Upgrades WIP 2.6 to 2.8 - (6 X 2.6 to 2.8 completed on: 20/02/16 All O.K )
Linux Lite 3.0 Humming on a ASRock N3070 Mobo ~ btrfs RAID 10 Install on 4 Disks :)
Computers Early days:
ZX Spectrum(1982) , HP-150 MS-DOS(1983) , Amstrad CPC464(1984) , BBC Micro B+64(1985) , My First PC HP-Vectra(1987)
