09-10-2021, 10:16 PM 
		
	
	
		I posted this once but didn't see it after a few hours.  So apologies if it appears twice.  I installed Linux Lite 5.6 to a SSD using a newer motherboard system with UEFI and a Ryzen CPU.  I was then able to boot from that SSD fine.  I then moved the SSD to the target system an old Athlon 64b 3500+ PC.  It will not boot to the hard drive. I've also tried a Seagate rotating drive with the same results.  The drives are recognized by the BIOS (non secure) but I only see a cursor on the display.
Running from the DVD I can see that the partitions seem to be correct using Gparted. I have attached a txt file of the system HW and a link to a screen shot of the Gparted is here:
https://imgur.com/a/3KAnhaN
	
	
	
	
Running from the DVD I can see that the partitions seem to be correct using Gparted. I have attached a txt file of the system HW and a link to a screen shot of the Gparted is here:
https://imgur.com/a/3KAnhaN

 
 

