UEFI Build Test

[firenice03]

Same set up mirroring the previous install. - Kangaroo is UEFI only (no legacy) SecureBoot = Enabled
Dual boot with Win10; LL4.2 installed to external MMC (SD) card.

Again, I created a USB (in Windows) from a separate system via Win32disk and the LL4.2_64bit UEFI ISO.. I booted the USB with secureboot enabled and into the Live Environment.
I checked disks, removed previous LL4.2 partition.

Started the Install from desktop - using the newly created partition.
All options were "default" with the exception of "Something Else" (didn't download updates nor 3rd party) - English locales and skipped the connection to WiFI .
I installed the the boot manager to mmcblk1, the same where LL is installed.

Just as the 1st time. Install was simple, straightforward and quick . The LiveUSB was the same as I used previously (reformatted) seemed to take just a bit longer longer to load.

After Install = Checked for updates 35 where ready, installed and rebooted.
Same outputs..

Code:

uname -r
       4.15.0-38-generic
cat /etc/llver
       Linux Lite 4.2

Haven't removed the VBOX stuff but 1st boot didn't seem out of the norm... Timed at <1 1/2 minutes.

Same error on boot about "failed mem for rom" that blinked up on the splash briefly - doesn't seem to affect..

If you need any output I'll leave as is till the weekend..