Hi,
If you go to Menu > All and select Language Support
((you may get a prompt about Language not being fully installed, select O.K))
You should get a screen like below:
((not 100% obvious what to do until you get to this scree, then it tells you))
![[Image: MniosCD.png]](http://i.imgur.com/MniosCD.png)
((The instruction can be overlooked)), but...
If you click on, and hold "English (United Kingdom)"
You can "Drag & Drop" it to the top of the list.
Then click on "Apply System-Wide"
"Re-boot", hopefully that should work.
Dave
If you go to Menu > All and select Language Support
((you may get a prompt about Language not being fully installed, select O.K))
You should get a screen like below:
((not 100% obvious what to do until you get to this scree, then it tells you))
((The instruction can be overlooked)), but...
If you click on, and hold "English (United Kingdom)"
You can "Drag & Drop" it to the top of the list.
Then click on "Apply System-Wide"
"Re-boot", hopefully that should work.
Dave
Upgrades WIP 2.6 to 2.8 - (6 X 2.6 to 2.8 completed on: 20/02/16 All O.K )
Linux Lite 3.0 Humming on a ASRock N3070 Mobo ~ btrfs RAID 10 Install on 4 Disks
Computers Early days:
ZX Spectrum(1982) , HP-150 MS-DOS(1983) , Amstrad CPC464(1984) , BBC Micro B+64(1985) , My First PC HP-Vectra(1987)
Linux Lite 3.0 Humming on a ASRock N3070 Mobo ~ btrfs RAID 10 Install on 4 Disks
Computers Early days:
ZX Spectrum(1982) , HP-150 MS-DOS(1983) , Amstrad CPC464(1984) , BBC Micro B+64(1985) , My First PC HP-Vectra(1987)