03-14-2015, 03:04 AM
Icom 207H pgm cable adaptor I made one years ago , there are schematics on DKMODS , the guts of it are in a small box, since then I have added other output cables using junk rca jacks. I would go back and change out put to an RJ45 or a serial 9 pin d connector , I have not tried chirp on the 207H . It works with my W32's and the Chinese UV5Rs, got a pair of those<sigh> but they wont do air band I see that almost every thing is USB now.
I want to use an RTL SDR but, don't know how yet, the part about python P3> made go back and study how to use that.I think I have to add it to my LL2.2 first. I was going to try and use this for a spectrum analyzer, albeit, not for accuracy, there are some old machines <cushman ce50a> I have, that have YIG osc,s in them and I would like to at least be able to hear them , they are above every thing I have for test equipment now. . A friend is bringing me some dead Boafungs to play with. ,,We shall see if they are fixable . Darrell de kb5zxm
I want to use an RTL SDR but, don't know how yet, the part about python P3> made go back and study how to use that.I think I have to add it to my LL2.2 first. I was going to try and use this for a spectrum analyzer, albeit, not for accuracy, there are some old machines <cushman ce50a> I have, that have YIG osc,s in them and I would like to at least be able to hear them , they are above every thing I have for test equipment now. . A friend is bringing me some dead Boafungs to play with. ,,We shall see if they are fixable . Darrell de kb5zxm