Linux Lite Forums

General => Security & Bug Fixes => Topic started by: atpersian on September 25, 2017, 04:07:23 AM

Title: [SOLVED]linux 3.6 graphic cart work ubnormally afret standby
Post by: atpersian on September 25, 2017, 04:07:23 AM
Dear ALL
my linuxlite 2.6 display cart get work abnormally after standby .
please help me to solve this. :'( :'( :'( :'( :'( :'(
acer e1-532g
amd radeon r5m240 1g dedicated
4g ram
ssd 250
linux lite 3.6 last daily update.
Title: Re: [SOLVED]linux 3.6 graphic cart work ubnormally afret standby
Post by: gold_finger on October 11, 2017, 08:29:14 AM
Did not see your post until now.  For future reference, a better place to post for help on this would have been in the "Video Cards" section under "Hardware -- Support".  (See this post (https://www.linuxliteos.com/forums/on-topic/posting-in-the-correct-support-section-of-the-forums/msg25274/#msg25274) for more info on what are best sections to use for support questions here on the forum.)


Look to see if there is a proprietary graphics driver available for your video card by going to Menu -> Settings -> Install Drivers.  If you see a driver listed there as available for your AMD video card try installing that.  (Note: it will take the system a few minutes to install it, so be patient and wait until it tells you it is finished.)  You may need to reboot computer after driver install to have it function properly.


Hope that helps.
Title: Re: [SOLVED]linux 3.6 graphic cart work ubnormally afret standby
Post by: atpersian on October 11, 2017, 10:47:05 AM
Dear Brother
thanks for your reply
i check this session and attach that screen-shot .please check that .
i check when my system get lock desktop by password after that i relogin saw wrong view . it look my pc get lock some process stop or hibernate.
if you have any idea to solve this or check which process get down by lock system .
B R 
Title: Re: [SOLVED]linux 3.6 graphic cart work ubnormally afret standby
Post by: trinidad on October 11, 2017, 11:18:48 AM
>Menu>Settings>Settings Manager>Power Manager
 Try setting system sleep mode to suspend, and also check your BIOS S1,2,3 settings. Try the fastest one. It will use more RAM but video should not drop to VGA. Some cards have no pre-boot function drivers at all.

TC
Title: Re: [SOLVED]linux 3.6 graphic cart work ubnormally afret standby
Post by: atpersian on October 11, 2017, 01:17:28 PM
Thanks brother
solve my problem .
B R