You are Here:
Linux Lite 6.6 FINAL Released - Support for 22 Languages Added - See Release Announcement Section



Info tool

Author (Read 14957 times)

0 Members and 1 Guest are viewing this topic.

Re: Info tool
« Reply #20 on: November 29, 2014, 03:50:49 AM »
 

sysdrum

  • Saying the wrong things at the right time.
  • Occasional Poster
  • **
  • 83
    Posts
  • Reputation: 12
  • That's personal.
    • View Profile

  • CPU: Intel Core i5-6400

  • MEMORY: 16Gb

  • VIDEO CARD: Nvidia 1050 Ti

This works on both xubuntu and LL 2.0 and 2.2 with Gedit

Code: [Select]
#! /bin/bash
#--------------------------------------------------------------------------------------------------------
# Info tool working with Gedit by Misko_2083 Update Sysdrum
#--------------------------------------------------------------------------------------------------------


#inxi installed?
if [ -z "$(which inxi)"  ]; then


   if zenity --title="Question" --question text="Inxi is not installed, do you want to install it?\nIf you choose No program will exit."
   then
      gksudo "sudo apt-get install inxi -y" | zenity --progress --title="Installing inxi" --text="please wait" --pulsate --auto-close
            if [ "${PIPESTATUS[0]}" -ne "0" ]; then
               zenity --error --title="Error" --text="inxi could not be installed."
               exit
            fi
   
   else
      exit
   fi
fi
#gedit installed?
if [ $(dpkg-query -W -f='${Status}' gedit 2>/dev/null | grep -c "ok installed") -eq 0 ];then


   if zenity --title="Question" --question text="Gedit is not installed, do you want to install it?\nIf you choose No program will exit."
   then
      gksudo "sudo apt-get install gedit -y" | zenity --progress --title="Installing Gedit" --text="please wait" --pulsate --auto-close     
            if [ "${PIPESTATUS[0]}" -ne "0" ]; then
               zenity --error --title="Error" --text="Gedit could not be installed."
               exit
            fi
   else
      exit
   fi
fi


disk_df=(FALSE "Fs disk space info" "df -Th | grep /dev/sd" "View filesystem disk space usage")


FDISK=(FALSE "List Partitions" "sudo fdisk -l" "List out the partition information (password required)")


BLOCKDEV=(FALSE "Display Block Devices" "lsblk" "List out information all block devices")


lspci_info=(FALSE "PCI info" "lspci -vnn" "View PCI devices info")


lspci_graph=(FALSE "Graphics" "lspci -vnn | grep VGA -A 12" "View graphics devices info")


lsusb_info=(FALSE "USB info" "lsusb" "View usb devices info")


CPU=(FALSE "32/64 bit CPU" " " "Find out is this 32 or 64 bit CPU")


CPUZ=(FALSE "Processor info" "lscpu" "Display detailed info on CPU")


OS=(FALSE "32/64 bit OS" "uname -a" "Find out is this 32 or 64 bit OS")


inxi_full=(FALSE "Full info" "inxi -Fxz" "View system info")


inxi_df=(FALSE "Partition info" "inxi -plu" "View partition info")


REPOS=(FALSE "View Repositories" "inxi -r" "View repositories on this sistem")


GRAPHICS=(FALSE "View Graphics" "inxi -Gxx" "View graphics on this sistem")


AUDIO=(FALSE "View Audio" "inxi -A" "View audio on this sistem")


NETWORK=(FALSE "View Network" "inxi -nz" "View network on this sistem")


NETWORKC=(FALSE "Network Configuration" "ifconfig -a" "View network  configuration on this sistem")


OPENGL=(FALSE "View OpenGL configuration" "glxinfo | grep OpenGL" "View OpenGL configuration on this sistem")


LSB=(FALSE "View lsb release" "lsb_release -dic" "View lsb release info")


ic="/usr/share/icons/zenity-llcc.png"
selection=$(zenity --window-icon="$ic" --list --checklist --width=900 --height=700 --column="Select" --column="Name" --column="Command" \
--column="Description" --text="Select the info tool you wish to use, then click the Display button." --title="Info" --ok-label="Display" --cancel-label="Quit" --separator="\n" \
"${disk_df[@]}" \
"${FDISK[@]}" \
"${BLOCKDEV[@]}" \
"${lspci_info[@]}" \
"${lspci_graph[@]}" \
"${lsusb_info[@]}" \
"${CPU[@]}" \
"${CPUZ[@]}" \
"${OS[@]}" \
"${inxi_full[@]}" \
"${inxi_df[@]}" \
"${REPOS[@]}" \
"${GRAPHICS[@]}" \
"${AUDIO[@]}" \
"${NETWORK[@]}" \
"${NETWORKC[@]}" \
"${OPENGL[@]}" \
"${LSB[@]}" )


# If Quit is clicked then exit
if [ "${PIPESTATUS[0]}" -ne "0" ]; then
exit 0
fi


# check if anything is selected
echo $selection | grep '[a-zA-Z0-9]'
if [ "${PIPESTATUS[1]}" -ne "0" ]; then
zenity --info --title='Info' --text='Nothing was selected.'
exit 0
fi


echo $selection | grep "^Fs disk space info" > /dev/null
if [ $? = 0 ];then
   SOME_TEXT="df - View file system disk space usage\nYou can select the mount to open in the file manager"
   SOME_TITLE="df"


   df -h -T| tail -n+2 | while read fs type size used rest target; do
      if [[ $rest ]] ; then
         echo "$fs" "$type" "$size"B "$used"B "$rest"B "${target[@]}" |  grep /dev/sd | # remove "grep /dev/sd |" to show all
         awk '{print $1,"\n",$2,"\n",$3,"\n",$4,"\n",$5,"\n",$6}BEGIN{ s = 7; e = 35; }{for (i=s; i<=e; i++) printf("%s%s", $(i), i<e ? OFS : "\n"); }' #Workaround for disk labels that contain whitespaces(number of characters that can be divided by whitespace =e-s)
      fi
   done | sed -e 's/[ \t]*$//' $1|zenity --list --width=685 --height=350 --title="${SOME_TITLE}" --text="${SOME_TEXT}" --column="Device" --column="Type" --column="Size" --column="Used" --column="Free" --column="%Used" --column="Mount" --print-column="7"| cut -d '|' -f2| tee /tmp/tempdf


   #With radiolist is also an option
   #done | sed -e 's/[ \t]*$//' $1| sed 's!^/dev/sd*!FALSE\n/dev/sd!g' | zenity --list --radiolist --width=685 --height=350 --title="${SOME_TITLE}" --text="${SOME_TEXT}" --column="Select" --column="FS" --column="Type" --column="Size" --column="Used" --column="Free" --column="%Used" --column="Mount" --print-column="8"| cut -d '|' -f2| tee /tmp/tempdf




   if [ -z "$(cat /tmp/tempdf)" ]; then
   exit 0
   fi


   xdg-open "$(cat /tmp/tempdf)"
   rm -f /tmp/tempdf
fi


echo $selection | grep "List Partitions" > /dev/null
if [ $? = 0 ];then
   gksudo --message 'To run this tool your password is required. Enter your password, or press Cancel.' 'sudo fdisk -l' |tee /tmp/lsblkinfo.txt| zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[2]}" -ne "1" ]; then
       gedit /tmp/lsblkinfo.txt; rm /tmp/lsblkinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "Display Block Devices" > /dev/null
if [ $? = 0 ];then
   lsblk | zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      lsblk > /tmp/lsblkinfo.txt; gedit /tmp/lsblkinfo.txt; rm /tmp/lsblkinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "PCI info" > /dev/null
if [ $? = 0 ];then
   lspci -vnn | zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      lspci -nn > /tmp/lspciinfo.txt; gedit /tmp/lspciinfo.txt; rm /tmp/lspciinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "^Graphics$" > /dev/null
if [ $? = 0 ];then
   lspci -vnn | grep VGA -A 12 | zenity --title="Graphics" --text-info --width=800 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[2]}" -ne "1" ]; then
      lspci -vnn | grep VGA -A 12  > /tmp/lspcigraph.txt; gedit /tmp/lspcigraph.txt; rm /tmp/lspcigraph.txt
   else
      exit 0
   fi
fi


echo $selection | grep "USB info" > /dev/null
if [ $? = 0 ];then
   lsusb | zenity --title="USB info" --text-info --width=800 --height=400 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      lsusb > /tmp/lsusbinfo.txt; gedit /tmp/lsusbinfo.txt; rm /tmp/lsusbinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "32/64 bit CPU" > /dev/null
if [ $? = 0 ];then
   if [ "$(egrep -c ' lm ' /proc/cpuinfo)" -lt "1" ]; then
      bus_zen="32"
   else
      bus_zen="64"
   fi
      zenity --title="32/64 bit CPU" --info --text="This is $bus_zen bit CPU"
fi




echo $selection | grep "Processor info" > /dev/null
if [ $? = 0 ];then
   lscpu | zenity --title="Processor info" --text-info --width=850 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      lscpu > /tmp/processorinfo.txt; gedit /tmp//tmp/processorinfo.txt; rm /tmp/processorinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "32/64 bit OS" > /dev/null
if [ $? = 0 ];then
   if [ "$(uname -a | egrep -c 'i386|i486|i586|i686')" -eq "1" ]; then
      os_zen="32"
   else
      os_zen="64"
   fi
      zenity --title="32/64 bit OS" --info --text="This is $os_zen bit OS"
fi


echo $selection | grep "Full info" > /dev/null
if [ $? = 0 ];then
   inxi -Fxz -c 0 | zenity --title="Full info" --text-info --width=850 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -Fxz -c 0 > /tmp/inxifull.txt; gedit /tmp/inxifull.txt; rm /tmp/inxifull.txt
   else
      exit 0
   fi
fi


echo $selection | grep "Partition info" > /dev/null
if [ $? = 0 ];then
   inxi -plu -c 0 | zenity --title="Partition info" --text-info --width=650 --height=400 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -plu -c 0 > /tmp/partitionsinfo.txt; gedit /tmp/partitionsinfo.txt; rm /tmp/partitionsinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "View Repositories" > /dev/null
if [ $? = 0 ];then
   inxi -r -c 0| zenity --title="Repositories" --text-info --width=850 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -r -c 0 > /tmp/repositorieslist.txt; gedit /tmp/repositorieslist.txt; rm /tmp/repositorieslist.txt
   else
      exit 0
   fi   
fi


echo $selection | grep "View Graphics" > /dev/null
if [ $? = 0 ];then
   inxi -Gxx -c 0| zenity --title="Graphics info" --text-info --width=850 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -Gxx -c 0 > /tmp/graphicsinfo.txt; gedit /tmp/graphicsinfo.txt; rm /tmp/graphicsinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "View Audio" > /dev/null
if [ $? = 0 ];then
   inxi -A -c 0| zenity --title="Audio info" --text-info --width=850 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -A -c 0 > /tmp/audioinfo.txt; gedit /tmp/audioinfo.txt; rm /tmp/audioinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "^View Network$" > /dev/null
if [ $? = 0 ];then
   inxi -nz -c 0 | zenity --title="Network info" --text-info --width=850 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -nz -c 0 > /tmp/networkinfo.txt; gedit /tmp/networkinfo.txt; rm /tmp/networkinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "Network Configuration" > /dev/null
if [ $? = 0 ];then
   ifconfig -a | zenity --title="Network info" --text-info --width=850 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      ifconfig -a > /tmp/networkconfinfo.txt; gedit /tmp/networkconfinfo.txt; rm /tmp/networkconfinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "View OpenGL configuration" > /dev/null
if [ $? = 0 ];then
   glxinfo | grep OpenGL| zenity --title="View OpenGL configuration" --text-info --width=850 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[2]}" -ne "1" ]; then
      glxinfo | grep OpenGL > /tmp/openglinfo.txt; gedit /tmp/openglinfo.txt; rm /tmp/openglinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "View lsb release" > /dev/null
if [ $? = 0 ];then
   lsb_release -dic| zenity --title="lsb_release" --text-info --width=850 --height=600 --ok-label="Open in Gedit" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      lsb_release -dic > /tmp/lsbinfo.txt; gedit /tmp/lsbinfo.txt; rm /tmp/lsbinfo.txt
   else
      exit 0
   fi
fi
« Last Edit: November 29, 2014, 05:22:50 AM by sysdrum »
 

Re: Info tool
« Reply #19 on: November 29, 2014, 02:57:46 AM »
 

anon222

  • Muted
  • Gold Level Poster
  • *
  • 688
    Posts
  • Reputation: 192
  • Linux Lite Member
    • View Profile

  • CPU: Dual core Pentium E5700 3GHz

  • MEMORY: 3Gb

  • VIDEO CARD: GeForce GT 430
Hi sysdrum,
You have "fifi" in the last line :) Type enter in the middle to make it work.

I gave up from text editors in the script because I can't make it work with gedit.
Now there is a "Save" button instead of "Open in Leafpad".
Script is more efficient, and now uses checklists.
This way it is possible to select multiple items in the list.

Code: [Select]
#! /bin/bash
#--------------------------------------------------------------------------------------------------------
# Info tool by Misko_2083
#--------------------------------------------------------------------------------------------------------

#inxi installed?
if [ -z "$(which inxi)"  ]; then

if zenity --title="Question" --question text="Inxi is not installed, do you want to install it?\nIf you choose No program will exit."
then
gksudo "sudo apt-get install inxi -y" | zenity --progress --title="Installing inxi" --text="please wait" --pulsate --auto-close
if [ "${PIPESTATUS[0]}" -ne "0" ]; then
zenity --error --title="Error" --text="inxi could not be installed."
exit
fi
else
exit
fi
fi

disk_df=(FALSE "Fs disk space info" "df -Th | grep /dev/sd" "View filesystem disk space usage")

FDISK=(FALSE "List Partition Tables" "sudo fdisk -l" "List out the partition information (password required)")

BLOCKDEV=(FALSE "Display Block Devices" "lsblk" "List out information of all block devices")

PARTED=(FALSE "List Partition Layout" "sudo parted -l" "List partition layout on all block devices")

lspci_info=(FALSE "PCI info" "lspci -vnn" "View PCI devices info")

lspci_graph=(FALSE "Graphics" "lspci -vnn | grep VGA -A 12" "View graphics devices info")

lsusb_info=(FALSE "USB info" "lsusb" "View usb devices info")

CPU=(FALSE "32/64 bit CPU" "egrep -c ' lm ' /proc/cpuinfo" "Find out is this 32 or 64 bit CPU")

CPUZ=(FALSE "Processor info" "lscpu" "Display detailed info on CPU")

OS=(FALSE "32/64 bit OS" "uname -a" "Find out is this 32 or 64 bit OS")

inxi_full=(FALSE "Full info" "inxi -Fxz" "View system info")

inxi_df=(FALSE "Partition info" "inxi -plu" "View partition info")

REPOS=(FALSE "View Repositories" "inxi -r" "View repositories on this sistem")

GRAPHICS=(FALSE "View Graphics" "inxi -Gxx" "View graphics on this sistem")

AUDIO=(FALSE "View Audio" "inxi -A" "View audio on this sistem")

NETWORK=(FALSE "View Network" "inxi -nz" "View network on this sistem")

NETWORKC=(FALSE "Network Configuration" "ifconfig -a" "View network  configuration on this sistem")

OPENGL=(FALSE "View OpenGL configuration" "glxinfo | grep OpenGL" "View OpenGL configuration on this sistem")

LSB=(FALSE "View lsb release" "lsb_release -dic" "View lsb release info")

ic="/usr/share/icons/zenity-llcc.png"
selection=$(zenity --window-icon="$ic" --list --checklist --width=900 --height=700 --column="Select" --column="Name" --column="Command" \
--column="Description" --text="Select the info tool you wish to use, then click the Display button.\nYou can select multiple tools." --title="Info" --ok-label="Display" --cancel-label="Quit" --separator="\n" \
"${disk_df[@]}" \
"${FDISK[@]}" \
"${BLOCKDEV[@]}" \
"${PARTED[@]}" \
"${lspci_info[@]}" \
"${lspci_graph[@]}" \
"${lsusb_info[@]}" \
"${CPU[@]}" \
"${CPUZ[@]}" \
"${OS[@]}" \
"${inxi_full[@]}" \
"${inxi_df[@]}" \
"${REPOS[@]}" \
"${GRAPHICS[@]}" \
"${AUDIO[@]}" \
"${NETWORK[@]}" \
"${NETWORKC[@]}" \
"${OPENGL[@]}" \
"${LSB[@]}" )

# If Quit is clicked then exit
if [ "${PIPESTATUS[0]}" -ne "0" ]; then
exit 0
fi

# check if anything is selected
echo $selection | grep '[a-zA-Z0-9]'
if [ "${PIPESTATUS[1]}" -ne "0" ]; then
zenity --info --title='Info' --text='Nothing was selected.'
exit 0
fi

echo $selection | grep "^Fs disk space info" > /dev/null
if [ $? = 0 ];then
SOME_TEXT="df - View file system disk space usage\nYou can select the mount to open in the file manager"
SOME_TITLE="df"

df -h -T| tail -n+2 | while read fs type size used rest target; do
if [[ $rest ]] ; then
echo "$fs" "$type" "$size"B "$used"B "$rest"B "${target[@]}" |  grep /dev/sd | # remove "grep /dev/sd |" to show all
awk '{print $1,"\n",$2,"\n",$3,"\n",$4,"\n",$5,"\n",$6}BEGIN{ s = 7; e = 35; }{for (i=s; i<=e; i++) printf("%s%s", $(i), i<e ? OFS : "\n"); }' #Workaround for disk labels that contain whitespaces(number of characters that can be divided by whitespace =e-s)
fi
done | sed -e 's/[ \t]*$//' $1|zenity --list --width=685 --height=350 --title="${SOME_TITLE}" --text="${SOME_TEXT}" --column="Device" --column="Type" --column="Size" --column="Used" --column="Free" --column="%Used" --column="Mount" --print-column="7"| cut -d '|' -f2| tee /tmp/tempdf

#With radiolist is also an option
#done | sed -e 's/[ \t]*$//' $1| sed 's!^/dev/sd*!FALSE\n/dev/sd!g' | zenity --list --radiolist --width=685 --height=350 --title="${SOME_TITLE}" --text="${SOME_TEXT}" --column="Select" --column="FS" --column="Type" --column="Size" --column="Used" --column="Free" --column="%Used" --column="Mount" --print-column="8"| cut -d '|' -f2| tee /tmp/tempdf


if [ -z "$(cat /tmp/tempdf)" ]; then
rm -f /tmp/tempdf
exit 0
fi

xdg-open "$(cat /tmp/tempdf)"
rm -f /tmp/tempdf
fi

echo $selection | grep "^List Partition Tables$" > /dev/null
if [ $? = 0 ];then
gksudo --message 'To run this tool your password is required. Enter your password, or press Cancel.' 'sudo fdisk -l' |tee /tmp/fdiskinfo| zenity --title="Partition Tables (sudo fdisk -l)" --text-info --width=800 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/fdiskinfo.txt)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Partition_Tables.txt" --title="Save List of the Partition Tables")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/fdiskinfo
fi

echo $selection | grep "Display Block Devices" > /dev/null
if [ $? = 0 ];then
lsblk  |tee /tmp/lsblkinfo | zenity --title="Block Devices (lsblk)" --text-info --width=800 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/lsblkinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Block_Devices.txt" --title="Save Block Devices info")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/lsblkinfo
fi

echo $selection | grep "^List Partition Layout$" > /dev/null
if [ $? = 0 ];then
gksudo --message 'To run this tool your password is required. Enter your password, or press Cancel.' 'sudo parted -l'|tee /tmp/partedinfo | zenity --title="Partition Layout (sudo parted -l)" --text-info --width=800 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/partedinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Partition_layout.txt" --title="Save Partition Layout info")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/partedinfo
fi

echo $selection | grep "^PCI info$" > /dev/null
if [ $? = 0 ];then
lspci -vnn | tee /tmp/lspciinfo | zenity --title="PCI info (lspci -vnn)" --text-info --width=800 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/lspciinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="PCI_Devices.txt" --title="Save PCI Devices info")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/lspciinfo
fi

echo $selection | grep "^Graphics$" > /dev/null
if [ $? = 0 ];then
lspci -vnn | grep VGA -A 12 | tee /tmp/lspcigraph| zenity --title="Graphics (lspci -vnn | grep VGA -A 12)" --text-info --width=800 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[3]}" -ne "1" ]; then
zNewData=$(cat /tmp/lspcigraph)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Graphics_info.txt" --title="Save Graphics info")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/lspcigraph
fi

echo $selection | grep "USB info" > /dev/null
if [ $? = 0 ];then
lsusb | tee /tmp/lsusbinfo | zenity --title="USB info (lsusb)" --text-info --width=800 --height=400 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/lsusbinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="USB_info.txt" --title="Save USB info")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/lsusbinfo
fi

echo $selection | grep "32/64 bit CPU" > /dev/null
if [ $? = 0 ];then
if [ "$(egrep -c ' lm ' /proc/cpuinfo)" -lt "1" ]; then
bus_zen="32"
else
bus_zen="64"
fi
zenity --title="32/64 bit CPU" --info --text="This is $bus_zen bit CPU"
fi


echo $selection | grep "Processor info" > /dev/null
if [ $? = 0 ];then
lscpu | tee /tmp/processorinfo | zenity --title="Processor info (lscpu)" --text-info --width=850 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/processorinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="CPU_info.txt" --title="Save Processor info")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/processorinfo
fi

echo $selection | grep "32/64 bit OS" > /dev/null
if [ $? = 0 ];then
if [ "$(uname -a | egrep -c 'i386|i486|i586|i686')" -eq "1" ]; then
os_zen="32"
else
os_zen="64"
fi
zenity --title="32/64 bit OS" --info --text="This is $os_zen bit OS"
fi

echo $selection | grep "Full info" > /dev/null
if [ $? = 0 ];then
inxi -Fxz -c 0 | tee /tmp/inxifull | zenity --title="Full info (inxi -Fxz)" --text-info --width=850 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/inxifull)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Full_info.txt" --title="Save Full Computer info")")
echo -n "$zNewData" > "$zSavePath"

fi
rm /tmp/inxifull
fi

echo $selection | grep "Partition info" > /dev/null
if [ $? = 0 ];then
inxi -plu -c 0 | tee /tmp/partitionsinfo| zenity --title="Partition info (inxi -plu)" --text-info --width=650 --height=400 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/partitionsinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Partition_info.txt" --title="Save Partition info")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/partitionsinfo
fi

echo $selection | grep "View Repositories" > /dev/null
if [ $? = 0 ];then
inxi -r -c 0 | tee /tmp/repositorieslist | zenity --title="Repositories (inxi -r)" --text-info --width=850 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/repositorieslist)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Repositories.txt" --title="Save List Of The Repositories")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/repositorieslist
fi

echo $selection | grep "View Graphics" > /dev/null
if [ $? = 0 ];then
inxi -Gxx -c 0 | tee /tmp/graphicsinfo | zenity --title="Graphics info (inxi -Gxx)" --text-info --width=850 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/graphicsinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Graphics_inxi.txt" --title="Save Graphic information (inxi)")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/graphicsinfo
fi

echo $selection | grep "View Audio" > /dev/null
if [ $? = 0 ];then
inxi -A -c 0 | tee /tmp/audioinfo | zenity --title="Audio info (inxi -A)" --text-info --width=850 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/audioinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Audio_info.txt" --title="Save Audio information (inxi)")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/audioinfo
fi

echo $selection | grep "^View Network$" > /dev/null
if [ $? = 0 ];then
inxi -nz -c 0 | tee /tmp/networkinfo | zenity --title="Network info (inxi -nz)" --text-info --width=850 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/networkinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Network_inxi.txt" --title="Save Network information (inxi)")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/networkinfo
fi

echo $selection | grep "Network Configuration$" > /dev/null
if [ $? = 0 ];then
ifconfig -a | tee /tmp/networkconfinfo | zenity --title="Network info (ifconfig -a)" --text-info --width=850 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/networkconfinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Network_conf.txt" --title="Save Network Configuration Info")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/networkconfinfo
fi

echo $selection | grep "View OpenGL configuration" > /dev/null
if [ $? = 0 ];then
glxinfo | grep OpenGL | tee /tmp/openglinfo | zenity --title="View OpenGL configuration (glxinfo | grep OpenGL)" --text-info --width=850 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[3]}" -ne "1" ]; then
zNewData=$(cat /tmp/openglinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="OpenGL_info.txt" --title="Save OpenGL Info")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/openglinfo
fi

echo $selection | grep "View lsb release" > /dev/null
if [ $? = 0 ];then
lsb_release -dic| tee /tmp/lsbinfo | zenity --title="View lsb release (lsb_release -dic)" --text-info --width=850 --height=600 --ok-label="Save" --cancel-label="Close"
if [ "${PIPESTATUS[2]}" -ne "1" ]; then
zNewData=$(cat /tmp/lsbinfo)
zSavePath=$(echo -n "$(zenity --file-selection --save --confirm-overwrite --filename="Network_conf.txt" --title="Save ls_ release Info")")
echo -n "$zNewData" > "$zSavePath"
fi
rm /tmp/lsbinfo
fi
 

Re: Info tool
« Reply #18 on: November 28, 2014, 11:59:00 PM »
 

sysdrum

  • Saying the wrong things at the right time.
  • Occasional Poster
  • **
  • 83
    Posts
  • Reputation: 12
  • That's personal.
    • View Profile

  • CPU: Intel Core i5-6400

  • MEMORY: 16Gb

  • VIDEO CARD: Nvidia 1050 Ti

Updated the code for those that use mousepad. I may try and tweak it to add switch for leafpad or mousepad or if neither are installed to pick one. But for now it will install mousepad if it is not installed.

Code: [Select]
#! /bin/bash
#--------------------------------------------------------------------------------------------------------
# Info tool by Misko_2083 Update Sysdrum
#--------------------------------------------------------------------------------------------------------


#inxi installed?
if [ -z "$(which inxi)"  ]; then


   if zenity --title="Question" --question text="Inxi is not installed, do you want to install it?\nIf you choose No program will exit."
   then
      gksudo "sudo apt-get install inxi -y" | zenity --progress --title="Installing inxi" --text="please wait" --pulsate --auto-close
            if [ "${PIPESTATUS[0]}" -ne "0" ]; then
               zenity --error --title="Error" --text="inxi could not be installed."
               exit
            fi
   
   else
      exit
   fi
fi
#mousepad installed?
if [ $(dpkg-query -W -f='${Status}' mousepad 2>/dev/null | grep -c "ok installed") -eq 0 ];then


   if zenity --title="Question" --question text="Mousepad is not installed, do you want to install it?\nIf you choose No program will exit."
   then
      gksudo "sudo apt-get install mousepad -y" | zenity --progress --title="Installing Mousepad" --text="please wait" --pulsate --auto-close     
            if [ "${PIPESTATUS[0]}" -ne "0" ]; then
               zenity --error --title="Error" --text="Mousepad could not be installed."
               exit
            fi
   else
      exit
   fi
fi


disk_df=(FALSE "Fs disk space info" "df -Th | grep /dev/sd" "View filesystem disk space usage")


FDISK=(FALSE "List Partitions" "sudo fdisk -l" "List out the partition information (password required)")


BLOCKDEV=(FALSE "Display Block Devices" "lsblk" "List out information all block devices")


lspci_info=(FALSE "PCI info" "lspci -vnn" "View PCI devices info")


lspci_graph=(FALSE "Graphics" "lspci -vnn | grep VGA -A 12" "View graphics devices info")


lsusb_info=(FALSE "USB info" "lsusb" "View usb devices info")


CPU=(FALSE "32/64 bit CPU" " " "Find out is this 32 or 64 bit CPU")


CPUZ=(FALSE "Processor info" "lscpu" "Display detailed info on CPU")


OS=(FALSE "32/64 bit OS" "uname -a" "Find out is this 32 or 64 bit OS")


inxi_full=(FALSE "Full info" "inxi -Fxz" "View system info")


inxi_df=(FALSE "Partition info" "inxi -plu" "View partition info")


REPOS=(FALSE "View Repositories" "inxi -r" "View repositories on this sistem")


GRAPHICS=(FALSE "View Graphics" "inxi -Gxx" "View graphics on this sistem")


AUDIO=(FALSE "View Audio" "inxi -A" "View audio on this sistem")


NETWORK=(FALSE "View Network" "inxi -nz" "View network on this sistem")


NETWORKC=(FALSE "Network Configuration" "ifconfig -a" "View network  configuration on this sistem")


OPENGL=(FALSE "View OpenGL configuration" "glxinfo | grep OpenGL" "View OpenGL configuration on this sistem")


LSB=(FALSE "View lsb release" "lsb_release -dic" "View lsb release info")


ic="/usr/share/icons/zenity-llcc.png"
selection=$(zenity --window-icon="$ic" --list --radiolist --width=900 --height=700 --column="Select" --column="Name" --column="Command" \
--column="Description" --text="Select the info tool you wish to use, then click the Display button." --title="Info" --ok-label="Display" --cancel-label="Quit" --separator="\n" \
"${disk_df[@]}" \
"${FDISK[@]}" \
"${BLOCKDEV[@]}" \
"${lspci_info[@]}" \
"${lspci_graph[@]}" \
"${lsusb_info[@]}" \
"${CPU[@]}" \
"${CPUZ[@]}" \
"${OS[@]}" \
"${inxi_full[@]}" \
"${inxi_df[@]}" \
"${REPOS[@]}" \
"${GRAPHICS[@]}" \
"${AUDIO[@]}" \
"${NETWORK[@]}" \
"${NETWORKC[@]}" \
"${OPENGL[@]}" \
"${LSB[@]}" )


# If Quit is clicked then exit
if [ "${PIPESTATUS[0]}" -ne "0" ]; then
exit 0
fi


# check if anything is selected
echo $selection | grep '[a-zA-Z0-9]'
if [ "${PIPESTATUS[1]}" -ne "0" ]; then
zenity --info --title='Info' --text='Nothing was selected.'
exit 0
fi


echo $selection | grep "^Fs disk space info" > /dev/null
if [ $? = 0 ];then
   SOME_TEXT="df - View file system disk space usage\nYou can select the mount to open in the file manager"
   SOME_TITLE="df"


   df -h -T| tail -n+2 | while read fs type size used rest target; do
      if [[ $rest ]] ; then
         echo "$fs" "$type" "$size"B "$used"B "$rest"B "${target[@]}" |  grep /dev/sd | # remove "grep /dev/sd |" to show all
         awk '{print $1,"\n",$2,"\n",$3,"\n",$4,"\n",$5,"\n",$6}BEGIN{ s = 7; e = 35; }{for (i=s; i<=e; i++) printf("%s%s", $(i), i<e ? OFS : "\n"); }' #Workaround for disk labels that contain whitespaces(number of characters that can be divided by whitespace =e-s)
      fi
   done | sed -e 's/[ \t]*$//' $1|zenity --list --width=685 --height=350 --title="${SOME_TITLE}" --text="${SOME_TEXT}" --column="Device" --column="Type" --column="Size" --column="Used" --column="Free" --column="%Used" --column="Mount" --print-column="7"| cut -d '|' -f2| tee /tmp/tempdf


   #With radiolist is also an option
   #done | sed -e 's/[ \t]*$//' $1| sed 's!^/dev/sd*!FALSE\n/dev/sd!g' | zenity --list --radiolist --width=685 --height=350 --title="${SOME_TITLE}" --text="${SOME_TEXT}" --column="Select" --column="FS" --column="Type" --column="Size" --column="Used" --column="Free" --column="%Used" --column="Mount" --print-column="8"| cut -d '|' -f2| tee /tmp/tempdf




   if [ -z "$(cat /tmp/tempdf)" ]; then
   exit 0
   fi


   xdg-open "$(cat /tmp/tempdf)"
   rm -f /tmp/tempdf
fi


echo $selection | grep "List Partitions" > /dev/null
if [ $? = 0 ];then
   gksudo --message 'To run this tool your password is required. Enter your password, or press Cancel.' 'sudo fdisk -l' |tee /tmp/lsblkinfo.txt| zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[2]}" -ne "1" ]; then
       mousepad /tmp/lsblkinfo.txt; rm /tmp/lsblkinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "Display Block Devices" > /dev/null
if [ $? = 0 ];then
   lsblk | zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      lsblk > /tmp/lsblkinfo.txt; mousepad /tmp/lsblkinfo.txt; rm /tmp/lsblkinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "PCI info" > /dev/null
if [ $? = 0 ];then
   lspci -vnn | zenity --title="PCI info" --text-info --width=800 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      lspci -nn > /tmp/lspciinfo.txt; mousepad /tmp/lspciinfo.txt; rm /tmp/lspciinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "^Graphics$" > /dev/null
if [ $? = 0 ];then
   lspci -vnn | grep VGA -A 12 | zenity --title="Graphics" --text-info --width=800 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[2]}" -ne "1" ]; then
      lspci -vnn | grep VGA -A 12  > /tmp/lspcigraph.txt; mousepad /tmp/lspcigraph.txt; rm /tmp/lspcigraph.txt
   else
      exit 0
   fi
fi


echo $selection | grep "USB info" > /dev/null
if [ $? = 0 ];then
   lsusb | zenity --title="USB info" --text-info --width=800 --height=400 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      lsusb > /tmp/lsusbinfo.txt; mousepad /tmp/lsusbinfo.txt; rm /tmp/lsusbinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "32/64 bit CPU" > /dev/null
if [ $? = 0 ];then
   if [ "$(egrep -c ' lm ' /proc/cpuinfo)" -lt "1" ]; then
      bus_zen="32"
   else
      bus_zen="64"
   fi
      zenity --title="32/64 bit CPU" --info --text="This is $bus_zen bit CPU"
fi




echo $selection | grep "Processor info" > /dev/null
if [ $? = 0 ];then
   lscpu | zenity --title="Processor info" --text-info --width=850 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      lscpu > /tmp/processorinfo.txt; mousepad /tmp//tmp/processorinfo.txt; rm /tmp/processorinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "32/64 bit OS" > /dev/null
if [ $? = 0 ];then
   if [ "$(uname -a | egrep -c 'i386|i486|i586|i686')" -eq "1" ]; then
      os_zen="32"
   else
      os_zen="64"
   fi
      zenity --title="32/64 bit OS" --info --text="This is $os_zen bit OS"
fi


echo $selection | grep "Full info" > /dev/null
if [ $? = 0 ];then
   inxi -Fxz -c 0 | zenity --title="Full info" --text-info --width=850 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -Fxz -c 0 > /tmp/inxifull.txt; mousepad /tmp/inxifull.txt; rm /tmp/inxifull.txt
   else
      exit 0
   fi
fi


echo $selection | grep "Partition info" > /dev/null
if [ $? = 0 ];then
   inxi -plu -c 0 | zenity --title="Partition info" --text-info --width=650 --height=400 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -plu -c 0 > /tmp/partitionsinfo.txt; mousepad /tmp/partitionsinfo.txt; rm /tmp/partitionsinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "View Repositories" > /dev/null
if [ $? = 0 ];then
   inxi -r -c 0| zenity --title="Repositories" --text-info --width=850 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -r -c 0 > /tmp/repositorieslist.txt; mousepad /tmp/repositorieslist.txt; rm /tmp/repositorieslist.txt
   else
      exit 0
   fi   
fi


echo $selection | grep "View Graphics" > /dev/null
if [ $? = 0 ];then
   inxi -Gxx -c 0| zenity --title="Graphics info" --text-info --width=850 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -Gxx -c 0 > /tmp/graphicsinfo.txt; mousepad /tmp/graphicsinfo.txt; rm /tmp/graphicsinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "View Audio" > /dev/null
if [ $? = 0 ];then
   inxi -A -c 0| zenity --title="Audio info" --text-info --width=850 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -A -c 0 > /tmp/audioinfo.txt; mousepad /tmp/audioinfo.txt; rm /tmp/audioinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "^View Network$" > /dev/null
if [ $? = 0 ];then
   inxi -nz -c 0 | zenity --title="Network info" --text-info --width=850 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      inxi -nz -c 0 > /tmp/networkinfo.txt; mousepad /tmp/networkinfo.txt; rm /tmp/networkinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "Network Configuration" > /dev/null
if [ $? = 0 ];then
   ifconfig -a | zenity --title="Network info" --text-info --width=850 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      ifconfig -a > /tmp/networkconfinfo.txt; mousepad /tmp/networkconfinfo.txt; rm /tmp/networkconfinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "View OpenGL configuration" > /dev/null
if [ $? = 0 ];then
   glxinfo | grep OpenGL| zenity --title="View OpenGL configuration" --text-info --width=850 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[2]}" -ne "1" ]; then
      glxinfo | grep OpenGL > /tmp/openglinfo.txt; mousepad /tmp/openglinfo.txt; rm /tmp/openglinfo.txt
   else
      exit 0
   fi
fi


echo $selection | grep "View lsb release" > /dev/null
if [ $? = 0 ];then
   lsb_release -dic| zenity --title="lsb_release" --text-info --width=850 --height=600 --ok-label="Open in Mousepad" --cancel-label="Close"
   if [ "${PIPESTATUS[1]}" -ne "1" ]; then
      lsb_release -dic > /tmp/lsbinfo.txt; mousepad /tmp/lsbinfo.txt; rm /tmp/lsbinfo.txt
   else
      exit 0
   fi
fi
« Last Edit: November 29, 2014, 03:36:51 AM by sysdrum »
 

Re: Info tool
« Reply #17 on: November 28, 2014, 11:00:02 PM »
 

Mike

  • Forum Regular
  • ***
  • 212
    Posts
  • Reputation: 26
  • Linux Lite Enthusiast
    • View Profile
Great job misko! I like it.

Based on sysdrum's feedback, could you perhaps utilize the $EDITOR system variable? Unfortunately it wasn't set in LL so I had to do export EDITOR = leafpad. Maybe you could do an if statement to see if leafpad or mousepad is installed. If not then default to nano. Just a thought.
 

Re: Info tool
« Reply #16 on: November 28, 2014, 05:09:50 PM »
 

sysdrum

  • Saying the wrong things at the right time.
  • Occasional Poster
  • **
  • 83
    Posts
  • Reputation: 12
  • That's personal.
    • View Profile

  • CPU: Intel Core i5-6400

  • MEMORY: 16Gb

  • VIDEO CARD: Nvidia 1050 Ti
The only issue I have is in the dependency on Leafpad is there a way you could set it to run a check for dependency when it is run with a notice. I had to edit it to use mousepad as I don't use leafpad.
 

Re: Info tool
« Reply #15 on: November 28, 2014, 04:52:59 PM »
 

TMG1961

  • PayPal Supporter
  • Gold Level Poster
  • *****
  • 591
    Posts
  • Reputation: 90
  • Linux Lite Member
    • View Profile

  • CPU: Intel(R) Core(TM) i3-7020U

  • MEMORY: 8Gb

  • VIDEO CARD: Intel(R) HD Graphics 620

  • Kernel: 5.x
Just do like I did in the 2nd post and then left click it.

Thanks..did that but had no idea how to make it executable. Did google it but didnt understand it at first. Tried several times before i finally got it to work.
Life on earth is expensive but it does include a free trip around the sun.
 

Re: Info tool
« Reply #14 on: November 28, 2014, 12:34:53 PM »
 

rokytnji

  • Friganeer
  • Platinum Level Poster
  • **********
  • 1255
    Posts
  • Reputation: 139
    • View Profile

  • CPU: Intel Core2 Duo U9600

  • MEMORY: 4Gb

  • VIDEO CARD: Intel Mobile 4
Just do like I did in the 2nd post and then left click it.
LL 3.6,2.8
Dell XT2 > Touchscreen Laptop
Dell 755 > Desktop
Acer 150 > Desktop
I am who I am. Your approval is not needed.
 

Re: Info tool
« Reply #13 on: November 28, 2014, 11:55:39 AM »
 

TMG1961

  • PayPal Supporter
  • Gold Level Poster
  • *****
  • 591
    Posts
  • Reputation: 90
  • Linux Lite Member
    • View Profile

  • CPU: Intel(R) Core(TM) i3-7020U

  • MEMORY: 8Gb

  • VIDEO CARD: Intel(R) HD Graphics 620

  • Kernel: 5.x
Question..how do you use this? I havent got a clue what to do with it or even how to get it working.
Could someone explain to me how to use these scripts?
Life on earth is expensive but it does include a free trip around the sun.
 

Re: Info tool
« Reply #12 on: November 28, 2014, 09:23:48 AM »
 

Mike

  • Forum Regular
  • ***
  • 212
    Posts
  • Reputation: 26
  • Linux Lite Enthusiast
    • View Profile
Personally, there is no need to "reinvent the wheel".
Not all wheels are created equal.
 

Re: Info tool
« Reply #11 on: November 15, 2014, 05:30:21 PM »
 

anon222

  • Muted
  • Gold Level Poster
  • *
  • 688
    Posts
  • Reputation: 192
  • Linux Lite Member
    • View Profile

  • CPU: Dual core Pentium E5700 3GHz

  • MEMORY: 3Gb

  • VIDEO CARD: GeForce GT 430
The rest of the buttons worked OK as far as the test went. For full readout. I like
Code: [Select]
inxi -zv7instead of
Code: [Select]
inxi -Fxz
Thank you you Rok
I see, it gives more info
Nice script...works great...nice output and quick...Thanks
You are welcome. :)
Personally, there is no need to "reinvent the wheel".  I just add a few codes and be done with it.  See
:)
It's not about reinventing the wheel, it's about making thing easier.
 

Re: Info tool
« Reply #10 on: November 14, 2014, 10:17:48 PM »
 

shengchieh

  • Forum Regular
  • ***
  • 155
    Posts
  • Reputation: 46
  • Linux Lite Member
    • View Profile
    • Tux's Links
Personally, there is no need to "reinvent the wheel".  I just add a few codes and be done with it.  See

[size=-1]http://www.webupd8.org/2011/07/how-to-get-hardware-information-in.html (How To Get Hardware Information In Linux; 7/27/11)
  http://maketecheasier.com/gather-hardware-information-in-linux/2011/05/12 (http://maketecheasier.com/gather-hardware-information-in-linux/2011/05/12)
  http://www.linux.com/learn/tutorials/620416:discovering-and-monitoring-hardware-in-linux- (Discovering and Monitoring Hardware in Linux; 8/17/12)
  http://www.binarytides.com/inxi-system-information-linux/ (Inxi is an amazing tool to check hardware information on Linux; 1/8/14)
  http://www.zdnet.co.uk/blogs/the-open-source-revolution-10014902/is-your-pc-slowing-down-10018071/ Is your PC slowing down?; 7/20/10)
  http://www.binarytides.com/linux-cpu-information/ (8 commads to check cpu information on Linux; 3/16/14)
  http://www.binarytides.com/linux-commands-hardware-info/ (16 commands to check hardware information on Linux; 4/8/14)
  http://www.itworld.com/virtualization/419480/how-interpret-cpu-load-linux (How to interpret CPU load on Linux; 5/19/14)

Sheng-Chieh
 [/size]
 

Re: Info tool
« Reply #9 on: November 14, 2014, 07:09:04 PM »
 

rbdflyboy

  • Occasional Poster
  • **
  • 84
    Posts
  • Reputation: 11
  • Linux Lite Member
    • View Profile
Nice script...works great...nice output and quick...Thanks


[sudo] password for rick:

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xeb2deb2d

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *          63    85851388    42925663    7  HPFS/NTFS/exFAT
/dev/sda2        85852158   156301311    35224577    5  Extended
/dev/sda5       155258880   156301311      521216   82  Linux swap / Solaris
/dev/sda6        85852160   155258879    34703360   83  Linux

 

Re: Info tool
« Reply #8 on: November 14, 2014, 06:56:38 PM »
 

gold_finger

  • Documentation Writer
  • Platinum Level Poster
  • *****
  • 1094
    Posts
  • Reputation: 325
  • Linux Lite Member
    • View Profile

  • CPU: Intel Core2 Duo E7500 3.0GHz

  • MEMORY: 4Gb

  • VIDEO CARD: Intel 4 Series Integrated Graphics
Great job again misko_2083!

Just tested it out on my system (64-bit LL 2.0) and all categories worked well.

Try Linux Beginner Search Engine for answers to Linux questions.
 

Re: Info tool
« Reply #7 on: November 14, 2014, 04:01:46 PM »
 

rokytnji

  • Friganeer
  • Platinum Level Poster
  • **********
  • 1255
    Posts
  • Reputation: 139
    • View Profile

  • CPU: Intel Core2 Duo U9600

  • MEMORY: 4Gb

  • VIDEO CARD: Intel Mobile 4
Quote
Thank you Rok,  :)
The second button was using wrong text file. That could be it. Try sudo fdisk -l
here is the new script

Brain Fart on my end miscko. The problem is not your button. It is the way I have this partitioned. It slipped my mind I am using gpt instead of msdos in my partition layout.
I forgot.

Code: [Select]
harry@biker1:~$ sudo fdisk -l
[sudo] password for harry:

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


Disk /dev/sda: 121.3 GB, 121332826112 bytes
255 heads, 63 sectors/track, 14751 cylinders, total 236978176 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1   236978175   118489087+  ee  GPT
harry@biker1:~$ sudo parted -l
Model: ATA APPLE SSD SM128 (scsi)
Disk /dev/sda: 121GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system  Name  Flags
 1      1049kB  9438MB  9437MB  ext4
 2      9438MB  121GB   112GB   ext3

Sorry, My Bad again.  ???

LL 3.6,2.8
Dell XT2 > Touchscreen Laptop
Dell 755 > Desktop
Acer 150 > Desktop
I am who I am. Your approval is not needed.
 

Re: Info tool
« Reply #6 on: November 14, 2014, 03:53:08 PM »
 

rokytnji

  • Friganeer
  • Platinum Level Poster
  • **********
  • 1255
    Posts
  • Reputation: 139
    • View Profile

  • CPU: Intel Core2 Duo U9600

  • MEMORY: 4Gb

  • VIDEO CARD: Intel Mobile 4
Another tool we use in our control center for applications like this one. Localizing all things like this in a control center since we use
Window Managers in AntiX instead of Desktop Enviornments.

Well we  have a button in the control center for editing config files. Named "Edit Config Files"
What it does. It asks for your password of course. Then opens geany. In Geany.
/etc/apt/sources.lstiles
/etc/default/grub
/etc/fstab
I can't remember the others right now because I am not on my AntiX computer right now.
But to give you a general idea of our control center.



Pretty spiffy for a non Desktop Enviornment, Debian Based, Fits on a CD distro.
We run a lot of personal scripts in our distro like you are attempting to do.

Problem is. systemd is playing hell with some of those scripts  since the switch to systemd was made.
Which is making it hell trying to get AntiX 14 out the door.
I am also busy helping working out those bugs also.
So I will be stepping out from here from time to time.



LL 3.6,2.8
Dell XT2 > Touchscreen Laptop
Dell 755 > Desktop
Acer 150 > Desktop
I am who I am. Your approval is not needed.
 

 

-->
X Close Ad

Linux Lite 6.6 FINAL Released - Support for 22 Languages Added - See Release Announcement Section