You are Here:
Linux Lite 6.6 FINAL Released - Support for 22 Languages Added - See Release Announcement Section



Recent Posts

Pages: 1 ... 8 9 [10]
91
Installing Software / Re: Brave
« Last post by Şerban S. on March 04, 2024, 12:22:53 PM »
Hi!

Try this:

https://deb.pkgs.org/packages/brave-amd64/brave-browser_1.57.47_amd64.deb.html

After downloading the .deb package, use the gdebi-gtk to install.

Good luck!
92
Other / Re: Keyboard freeze
« Last post by Şerban S. on March 04, 2024, 11:28:10 AM »
Hi!

I've been looking at the lines listed. I also had trouble (different causes, similar behaviour) related to some devices.
In my experience, the problem comes from your USB Controller. Namely, a certain device that is attached through the USB Hub you are using.
Watch closely the following lines.

Here's the latest log. I don't see anything. Let me know if you get any clue:

Mar 01 08:16:18 MYPC01 kernel: ACPI: bus type USB registered

[...]
Mar 01 08:16:18 MYPC01 kernel: usb 2-1: new high-speed USB device number 2 using ehci-pci
[...]
Mar 01 08:16:18 MYPC01 kernel: usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
Mar 01 08:16:18 MYPC01 kernel: usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 01 08:16:18 MYPC01 kernel: hub 2-1:1.0: USB hub found
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: new full-speed USB device number 3 using ehci-pci
[...]
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32

[...]



Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32
[...]Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: new full-speed USB device number 4 using ehci-pci
[...]Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32.]Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32
[...]Mar 01 08:16:18 MYPC01 kernel: usb 2-1-port2: attempt power cycle
[...]Mar 01 08:16:18 MYPC01 kernel: input: Metadot - Das Keyboard Das Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/0003:24F0:0140.0003/input/input8
Mar 01 08:16:18 MYPC01 kernel: logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2.2/input0
Mar 01 08:16:18 MYPC01 kernel: hid-generic 0003:24F0:0140.0003: input,hidraw2: USB HID v1.10 Keyboard [Metadot - Das Keyboard Das Keyboard] on usb-0000:00:1d.0-1.2.4/input0
[...]


You can notice the number of errors on the attempts to access a device. I assume it is a storage media.
The polling USB routine attempts to reconfigure the bus but fails everytime.
Unfortunately, it is extremely difficult to figure out what really happens.
To make the long story short:
1. Remove any USB device attached to the system.
2. Plug in the USB devices one by one, in this exact order: USB Keyboard.
3. Start the computer.
4. Plug in the next USB devices, one by one: USB Hub; USB Mouse; USB Audio interface (if any); USB Printer. The last ones: USB Storage media.
5. At each step, write down on a paper IF something unexpected happens.

Please also do the following from the CLI:

Code: [Select]
sudo inxi -c 0 -ACdGMNSz

Post here the contents of the report.

Do also

Code: [Select]
sudo lsusb
Add the result to the post.


A little bit of digging, proves I got the trouble figured out correctly:

https://askubuntu.com/questions/1431627/ubuntu-22-04-fails-to-resume-with-error-device-descriptor-read-64-error-71

https://bbs.archlinux.org/viewtopic.php?id=253704

Tell us what changed, if any change occured. Good luck!
93
Practical Explanation ( For Example ) :- `1st of all can you tell me every single seconds detail from that time when you born ?? ( i need every seconds detail ?? that what- what you have thought and done on every single second )

can you tell me every single detail of your `1 cheapest Minute Or your whole hour, day, week, month, year or your whole life ??

if you are not able to tell me about this life then what proof do you have that you didn't forget your past ? and that you will not forget this present life in the future ?

that is Fact that Supreme Lord Krishna exists but we posses no such intelligence to understand him.
there is also next life. and i already proved you that no scientist, no politician, no so-called intelligent man in this world is able to understand this Truth. cuz they are imagining. and you cannot imagine what is god, who is god, what is after life etc.
_______
for example :Your father existed before your birth. you cannot say that before your birth your father don,t exists.

So you have to ask from mother, "Who is my father?" And if she says, "This gentleman is your father," then it is all right. It is easy.
Otherwise, if you makes research, "Who is my father?" go on searching for life; you'll never find your father.

( now maybe...maybe you will say that i will search my father from D.N.A, or i will prove it by photo's, or many other thing's which i will get from my mother and prove it that who is my Real father.{ So you have to believe the authority. who is that authority ? she is your mother. you cannot claim of any photo's, D.N.A or many other things without authority ( or ur mother ).

if you will show D.N.A, photo's, and many other proofs from other women then your mother. then what is use of those proofs ??} )

same you have to follow real authority. "Whatever You have spoken, I accept it," Then there is no difficulty. And You are accepted by Devala, Narada, Vyasa, and You are speaking Yourself, and later on, all the acaryas have accepted. Then I'll follow.
I'll have to follow great personalities. The same reason mother says, this gentleman is my father. That's all. Finish business. Where is the necessity of making research? All authorities accept Krsna, the Supreme Personality of Godhead. You accept it; then your searching after God is finished.

Why should you waste your time?
_______
all that is you need is to hear from authority ( same like mother ). and i heard this truth from authority " Srila Prabhupada " he is my spiritual master.
im not talking these all things from my own.
___________

in this world no `1 can be Peace full. this is all along Fact.

cuz we all are suffering in this world 4 Problems which are Disease, Old age, Death, and Birth after Birth.

tell me are you really happy ?? you can,t be happy if you will ignore these 4 main problem. then still you will be Forced by Nature.
___________________

if you really want to be happy then follow these 6 Things which are No illicit s.ex, No g.ambling, No d.rugs ( No tea & coffee ), No meat-eating ( No onion & garlic's )

5th thing is whatever you eat `1st offer it to Supreme Lord Krishna. ( if you know it what is Guru parama-para then offer them food not direct Supreme Lord Krishna )

and 6th " Main Thing " is you have to Chant " hare krishna hare krishna krishna krishna hare hare hare rama hare rama rama rama hare hare ".
_______________________________
If your not able to follow these 4 things no illicit s.ex, no g.ambling, no d.rugs, no meat-eating then don,t worry but chanting of this holy name ( Hare Krishna Maha-Mantra ) is very-very and very important.

Chant " hare krishna hare krishna krishna krishna hare hare hare rama hare rama rama rama hare hare " and be happy.

if you still don,t believe on me then chant any other name for 5 Min's and chant this holy name for 5 Min's and you will see effect. i promise you it works And chanting at least 16 rounds ( each round of 108 beads ) of the Hare Krishna maha-mantra daily.
____________
Here is no Question of Holy Books quotes, Personal Experiences, Faith or Belief. i accept that Sometimes Faith is also Blind. Here is already Practical explanation which already proved that every`1 else in this world is nothing more then Busy Foolish and totally idiot.
_________________________
Source(s):
every `1 is already Blind in this world and if you will follow another Blind then you both will fall in hole. so try to follow that person who have Spiritual Eyes who can Guide you on Actual Right Path. ( my Authority & Guide is my Spiritual Master " Srila Prabhupada " )
_____________
if you want to see Actual Purpose of human life then see this link : ( triple w ( d . o . t ) asitis ( d . o . t ) c . o . m  {Bookmark it })
read it complete. ( i promise only readers of this book that they { he/she } will get every single answer which they want to know about why im in this material world, who im, what will happen after this life, what is best thing which will make Human Life Perfect, and what is perfection of Human Life. ) purpose of human life is not to live like animal cuz every`1 at present time doing 4 thing which are sleeping, eating, s.ex & fear. purpose of human life is to become freed from Birth after birth, Old Age, Disease, and Death.
94
Updates / Re: Update errors - LinuxCNC NO_PUBKEY
« Last post by stevef on March 02, 2024, 12:59:18 AM »
Quote
Never actually installed. I tried from a uspace.deb file.  I get an unmet dependencies error and installation stops.
It might help solving the problem if we know what instructions you were trying to follow.

It looks like something has added LinuxCNC as a source of software updates to your system which has broken the update process.
Click 'Menu' then begin typing 'Software' into the search box.
When you see 'Software & Updates' click on it.

On the window that opens, select the tabs in turn looking for something about LinuxCNC.  It may be in the 'Other Software' tab.
If you find LinuxCNC is checked, uncheck any references to it, then close the window, restart and try updates again.
95
Updates / Re: Update errors - LinuxCNC NO_PUBKEY
« Last post by n_spect_r on March 01, 2024, 06:11:17 PM »
Never actually installed. I tried from a uspace.deb file.  I get an unmet dependencies error and installation stops.
96
Other / Re: Keyboard freeze
« Last post by stevef on March 01, 2024, 10:48:17 AM »
Can you provide some context about this log extract ?
For example, what time was the 'freeze' that this log covers ?
What actions were taken to unfreeze and at what time were those actions done ?

Are your keyboard and mouse connected by USB ?

Edit - to correct typing
97
Other / Re: Keyboard freeze
« Last post by commodore2 on March 01, 2024, 06:39:43 AM »
Here's the latest log. I don't see anything. Let me know if you get any clue:

Mar 01 08:16:18 MYPC01 kernel: ACPI: bus type USB registered
Mar 01 08:16:18 MYPC01 kernel: usbcore: registered new interface driver usbfs
Mar 01 08:16:18 MYPC01 kernel: usbcore: registered new interface driver hub
Mar 01 08:16:18 MYPC01 kernel: usbcore: registered new device driver usb
Mar 01 08:16:18 MYPC01 kernel: pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x790 took 20895 usecs
Mar 01 08:16:18 MYPC01 kernel: pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x790 took 23380 usecs
Mar 01 08:16:18 MYPC01 kernel: ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
Mar 01 08:16:18 MYPC01 kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Mar 01 08:16:18 MYPC01 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
Mar 01 08:16:18 MYPC01 kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 01 08:16:18 MYPC01 kernel: usb usb1: Product: EHCI Host Controller
Mar 01 08:16:18 MYPC01 kernel: usb usb1: Manufacturer: Linux 6.6.0 ehci_hcd
Mar 01 08:16:18 MYPC01 kernel: usb usb1: SerialNumber: 0000:00:1d.0
Mar 01 08:16:18 MYPC01 kernel: hub 1-0:1.0: USB hub found
Mar 01 08:16:18 MYPC01 kernel: ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2
Mar 01 08:16:18 MYPC01 kernel: ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Mar 01 08:16:18 MYPC01 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
Mar 01 08:16:18 MYPC01 kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 01 08:16:18 MYPC01 kernel: usb usb2: Product: EHCI Host Controller
Mar 01 08:16:18 MYPC01 kernel: usb usb2: Manufacturer: Linux 6.6.0 ehci_hcd
Mar 01 08:16:18 MYPC01 kernel: usb usb2: SerialNumber: 0000:00:1a.0
Mar 01 08:16:18 MYPC01 kernel: hub 2-0:1.0: USB hub found
Mar 01 08:16:18 MYPC01 kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: usb 2-1: new high-speed USB device number 2 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
Mar 01 08:16:18 MYPC01 kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 01 08:16:18 MYPC01 kernel: hub 1-1:1.0: USB hub found
Mar 01 08:16:18 MYPC01 kernel: usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
Mar 01 08:16:18 MYPC01 kernel: usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 01 08:16:18 MYPC01 kernel: hub 2-1:1.0: USB hub found
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.1: new full-speed USB device number 3 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: new full-speed USB device number 3 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2: new high-speed USB device number 4 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= d.a0
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2: Product: USB2.0 Hub             
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2: Manufacturer: VIA Labs, Inc.         
Mar 01 08:16:18 MYPC01 kernel: hub 1-1.2:1.0: USB hub found
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.3: new high-speed USB device number 5 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: new full-speed USB device number 4 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.3: New USB device found, idVendor=0bda, idProduct=b812, bcdDevice= 2.10
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.3: Product: 802.11ac NIC
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.3: Manufacturer: Realtek
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.3: SerialNumber: 123456
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2.2: new full-speed USB device number 6 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2.2: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2.2: Product: USB Receiver
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2.2: Manufacturer: Logitech
Mar 01 08:16:18 MYPC01 kernel: usbcore: registered new interface driver usbhid
Mar 01 08:16:18 MYPC01 kernel: usbhid: USB HID core driver
Mar 01 08:16:18 MYPC01 kernel: usb 2-1-port2: attempt power cycle
Mar 01 08:16:18 MYPC01 kernel: input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C534.0001/input/input2
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2.4: new full-speed USB device number 7 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2.2/input0
Mar 01 08:16:18 MYPC01 kernel: input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.1/0003:046D:C534.0002/input/input3
Mar 01 08:16:18 MYPC01 kernel: input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.1/0003:046D:C534.0002/input/input4
Mar 01 08:16:18 MYPC01 kernel: input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.1/0003:046D:C534.0002/input/input5
Mar 01 08:16:18 MYPC01 kernel: hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2.2/input1
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2.4: New USB device found, idVendor=24f0, idProduct=0140, bcdDevice= 1.00
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2.4: Product: Das Keyboard
Mar 01 08:16:18 MYPC01 kernel: usb 1-1.2.4: Manufacturer: Metadot - Das Keyboard
Mar 01 08:16:18 MYPC01 kernel: input: Metadot - Das Keyboard Das Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/0003:24F0:0140.0003/input/input8
Mar 01 08:16:18 MYPC01 kernel: logitech-djreceiver 0003:046D:C534.0001: hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2.2/input0
Mar 01 08:16:18 MYPC01 kernel: hid-generic 0003:24F0:0140.0003: input,hidraw2: USB HID v1.10 Keyboard [Metadot - Das Keyboard Das Keyboard] on usb-0000:00:1d.0-1.2.4/input0
Mar 01 08:16:18 MYPC01 kernel: input: Metadot - Das Keyboard Das Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.1/0003:24F0:0140.0004/input/input9
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: new full-speed USB device number 5 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: input: Metadot - Das Keyboard Das Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.1/0003:24F0:0140.0004/input/input10
Mar 01 08:16:18 MYPC01 kernel: hid-generic 0003:24F0:0140.0004: input,hidraw3: USB HID v1.10 Device [Metadot - Das Keyboard Das Keyboard] on usb-0000:00:1d.0-1.2.4/input1
Mar 01 08:16:18 MYPC01 kernel: logitech-djreceiver 0003:046D:C534.0002: hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2.2/input1
Mar 01 08:16:18 MYPC01 kernel: input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.1/0003:046D:C534.0002/0003:046D:4054.0005/input/input12
Mar 01 08:16:18 MYPC01 kernel: hid-generic 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:1d.0-1.2.2/input1:2
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device not accepting address 5, error -32
Mar 01 08:16:18 MYPC01 kernel: input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.1/0003:046D:C534.0002/0003:046D:4054.0005/input/input16
Mar 01 08:16:18 MYPC01 kernel: logitech-hidpp-device 0003:046D:4054.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:1d.0-1.2.2/input1:2
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: new full-speed USB device number 6 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device not accepting address 6, error -32
Mar 01 08:16:18 MYPC01 kernel: usb 2-1-port2: unable to enumerate USB device
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: new full-speed USB device number 7 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: new full-speed USB device number 8 using ehci-pci
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -32
Mar 01 08:16:18 MYPC01 kernel: usb 2-1-port2: attempt power cycle
Mar 01 08:16:18 MYPC01 kernel: usb 2-1.2: new full-speed USB device number 9 using ehci-pci
Mar 01 08:16:19 MYPC01 kernel: usb 2-1.2: device not accepting address 9, error -32
Mar 01 08:16:19 MYPC01 kernel: usb 2-1.2: new full-speed USB device number 10 using ehci-pci
Mar 01 08:16:20 MYPC01 kernel: usb 2-1.2: device not accepting address 10, error -32
Mar 01 08:16:20 MYPC01 kernel: usb 2-1-port2: unable to enumerate USB device
Mar 01 08:16:20 MYPC01 kernel: usbcore: registered new interface driver btusb
Mar 01 08:16:21 MYPC01 kernel: usbcore: registered new interface driver rtl88x2bu
Mar 01 08:16:22 MYPC01 audit[557]: AVC apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=557 comm="apparmor_parser"
Mar 01 08:16:23 MYPC01 NetworkManager[681]: <info>  [1709280983.9277] rfkill1: found Wi-Fi radio killswitch (at /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/ieee80211/phy0/rfkill1) (driver rtl88x2bu)
Mar 01 08:16:25 MYPC01 ModemManager[670]: <info>  [base-manager] couldn't check support for device '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3': not supported by any plugin
Mar 01 08:16:32 MYPC01 kernel:  usb_recv_tasklet+0x65/0x150 [88x2bu]
Mar 01 08:16:32 MYPC01 kernel:  usb_recv_tasklet+0x65/0x150 [88x2bu]
Mar 01 08:16:32 MYPC01 kernel:  usb_recv_tasklet+0x65/0x150 [88x2bu]
Mar 01 08:16:32 MYPC01 kernel:  usb_recv_tasklet+0x65/0x150 [88x2bu]
Mar 01 08:42:03 MYPC01 kernel: usb 2-1.2: new high-speed USB device number 11 using ehci-pci
Mar 01 08:42:04 MYPC01 kernel: usb 2-1.2: device descriptor read/64, error -71
Mar 01 08:42:04 MYPC01 kernel: usb 2-1.2: device not accepting address 11, error -71
Mar 01 08:42:05 MYPC01 kernel: usb 2-1-port2: Cannot enable. Maybe the USB cable is bad?
Mar 01 08:42:05 MYPC01 kernel: usb 2-1-port2: attempt power cycle
Mar 01 08:42:06 MYPC01 kernel: usb 2-1.2: new full-speed USB device number 13 using ehci-pci
Mar 01 08:42:06 MYPC01 kernel: usb 2-1.2: device descriptor read/8, error -32
Mar 01 08:42:06 MYPC01 kernel: usb 2-1.2: device descriptor read/8, error -32
Mar 01 08:42:06 MYPC01 kernel: usb 2-1.2: new high-speed USB device number 14 using ehci-pci
Mar 01 08:42:06 MYPC01 kernel: usb 2-1.2: device descriptor read/8, error -71
Mar 01 08:42:06 MYPC01 kernel: usb 2-1.2: device descriptor read/8, error -71
Mar 01 08:42:06 MYPC01 kernel: usb 2-1-port2: unable to enumerate USB device


98
Other / Re: Keyboard freeze
« Last post by stevef on March 01, 2024, 12:35:42 AM »
Examination of the logs for a period around the time of a known freeze might show something.
99
Other / Re: Keyboard freeze
« Last post by commodore2 on February 29, 2024, 05:56:32 PM »
Let me rephrase my problem; the computer itself does not freeze. It's the overall keyboard and certain mouse clicks that go unresponsive.

The computer works OK but I am unable to type anything in any application e.g. terminal, text editor etc. However I am able to open apps using the Xfce menu. I am able to close any window but double click or minimize will stop working. Cursor will not blink in the terminal/bash window.

Initially I was able to recover via logout/login or restart but I just discovered that I can "fix" the issue by switching consoles as well. i.e. pressing CTRL+ALT+F3 then back in GUI with CTRL+ALT+F7

I am going to check next time if the issue auto-fix itself.

The only change that I made was adding intel_idle.max_cstate=1 in the grub configuration. That was mentioned somewhere online to fix the issue. I guess I can remove it as it does not appear to help.
100
Introductions / Re: Hello from France
« Last post by Jean-Marc B on February 29, 2024, 04:47:26 PM »
Hi and welcome !

From a fellow LL and countryman.
Pages: 1 ... 8 9 [10]
-->
X Close Ad

Linux Lite 6.6 FINAL Released - Support for 22 Languages Added - See Release Announcement Section