+- Linux Lite Forums (https://www.linuxliteos.com/forums)
+-- Forum: Hardware - Support (https://www.linuxliteos.com/forums/forumdisplay.php?fid=6)
+--- Forum: Printing and Scanning (https://www.linuxliteos.com/forums/forumdisplay.php?fid=25)
+--- Thread: CUPS Samsung -m2070 (/showthread.php?tid=7750)
CUPS Samsung -m2070 - Rosario Portoghese - 04-24-2021
Hi
I'm new to linux.
I'm facing a lot a problems with -m2070 printer.
When I open cups server and I look for available printers I find several entries of Samsung -m2070, here what I find:
Samsung M2070 Series (Samsung M2070 Series (SEC84251902B75C))
Samsung M2070 Series (Samsung M2070 Series)
Samsung M2070 Series (Samsung M2070 Series (driverless))
What does it mean? Should I install one of those printers?
Anyway even if I install one of the available printers at the end of the process, when _I try to print test page I get the message:"Filter Failed".
Does CUPS work properly with linux lite?
thanks
Re: CUPS Samsung -m2070 - arky217 - 04-24-2021
(04-24-2021, 05:37 PM)Rosario Portoghese link Wrote: Hi
I'm new to linux.
I'm facing a lot a problems with -m2070 printer.
When I open cups server and I look for available printers I find several entries of Samsung -m2070, here what I find:
Samsung M2070 Series (Samsung M2070 Series (SEC84251902B75C))
Samsung M2070 Series (Samsung M2070 Series)
Samsung M2070 Series (Samsung M2070 Series (driverless))
What does it mean? Should I install one of those printers?
Anyway even if I install one of the available printers at the end of the process, when _I try to print test page I get the message:"Filter Failed".
Does CUPS work properly with linux lite?
thanks
I have a Samsung M4070FR network printer/scanner and I struggled for a long time
to get it to print and scan usings CUPS.
But, I finally have it down pat with the following instructions.
If your printer is a network printer (and it seems to be since it has an ethernet connection), you should be able to give it a static ip address via the panel
on the printer. If so, or if you use a print server with it, then these instructions
should work for you.
* Add printer using CUPS:
First, enable and start cups with sudo systemctl enable cups
then sudo systemctl start cups then reboot
Then turn on printer
then install printer using the terminal with the command:
lpadmin -p jimsprinter -E -v ipp://192.168.1.149 -m everywhere
( this method has worked every time for me)
( the -p option is the name you select for the printer, the -E option
enables the printer and accepts new print jobs, the -v option sets the
uri for the printer which for mine is ipp://192.168.1.149, the -m option is the
driver which is called 'everywhere', (it's the CUPS generic driver))
Using this method, you don't have to install any Samsung drivers.
Now to get the scanner to work I had to open /etc/sane_d/xerox_mfp.conf
as root and add the line
tcp 192.168.1.149
The static address you give the printer has to be compatible with the
range of addresses that your router uses and depending on your router,
it should be 192.168.1or2.xxx