Project - UK Thunderball killa / Open Source donation Builder

Project - UK Thunderball killa / Open Source donation Builder - Printable Version

+- Linux Lite Forums (https://www.linuxliteos.com/forums)
+-- Forum: Development (https://www.linuxliteos.com/forums/forumdisplay.php?fid=7)
+--- Forum: Coding (https://www.linuxliteos.com/forums/forumdisplay.php?fid=33)
+--- Thread: Project - UK Thunderball killa / Open Source donation Builder (/showthread.php?tid=5260)

Project - UK Thunderball killa / Open Source donation Builder - bitsnpcs - 05-18-2018

Hello,

adjusted Lotto killas so it works for the UK Thunderball draw.

[Image: thunder.png]

Screenshot of Thunderball number maker running on Linux Lite in terminal and its code in Gedit.
This will pick your 5 number choices from the 39, and then pick your 1 Thunderball number from the 14 numbers.
It will also give you real life choices to make (interactive)

Here is the code -

Code:
from random import *

thunderchoices = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39]

thunderball = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14]

# Picks 5 numbers from the choices 

x = sample(thunderchoices, 5)

# Picks your thunderball

y = sample(thunderball, 1)   

print x 

print y

print ("You have Options - " "\nDonate a percentage of any wins to your favorite project" "\nDonate the stake instead to your favorite project")

Copy/paste in to Leafpad document in Home folder and save as thunder.py

Hold down Ctrl and Alt then press t (Ctrl+Alt+t)
Copy/paste or type into terminal -

Code:
python thunder.py

Hope you enjoy reading this.

Re: Project - UK Thunderball killa / Open Source donation Builder - bitsnpcs - 05-19-2018

Hello,

here is the new version of UK Thunderball picker, using less typing in code, and having more comment lines showing what it is doing.

[Image: thundernext.png]

Screenshot showing Thunderball picker running on Linux Lite in Terminal, and showing code in Gedit.

Here is the code -

Code:
# imports random function

import random

# labelling for thunderball output

print ("Your numbers are - ")

# Picks 5 random numbers between 1 and 39

# range goes to 40 so that 39 is inclusive, 40 is not inclusive

# .sample does not duplicate numbers picked

# Outputs these 5 results in a list

print(random.sample(range(1, 40),5))

print ("Your Thunderball number is - ")

print(random.sample(range(1, 15),1))

# interactivity - prints options

print ("You have Options - " "\nDonate a percentage of any wins to your favorite project" "\nDonate the stake instead to your favorite project")

Copy paste the code into a Leafpad document in Home folder named thundernext.py

To run the code -
Open your terminal by holding down Ctrl + Alt then pressing t (Ctrl+Alt+t)
Copy paste or type in to your terminal

Code:
thundernext.py

Press Enter.

I hope you enjoyed reading this.