+- Linux Lite Forums (https://www.linuxliteos.com/forums)
+-- Forum: Hardware - Support (https://www.linuxliteos.com/forums/forumdisplay.php?fid=6)
+--- Forum: Printing and Scanning (https://www.linuxliteos.com/forums/forumdisplay.php?fid=25)
+--- Thread: Wireless Setup for Brother HL-L2380DW (/showthread.php?tid=4077)
Wireless Setup for Brother HL-L2380DW - CaperAsh - 05-20-2017
have gone round and round. Printer installed fine with usb connection going through routine found via web search. But entirely unable after dozens of pages to find a way to install this printer so it works wirelessly. Cannot find the ip address. The interface on the printer has only 4 buttons and seems to just want to search for a connection, no other menu options. After searching 2-3 minutes it prints out an error page at the bottom of which it says:
<Configuration>
Network Name (SSID) SETUP
Hardware Address (MAC) 28:56:5a:67:49:2b
Communication Mode
Re: Wireless Setup for Brother HL-L2380DW - CaperAsh - 05-20-2017
That was submitted by error and the long post I wrote with all details then got wiped out!!!!! Here we go again:
<Configuration>
Network Name (SSID) SETUP
Hardware Address (MAC) 28:56:5a:67:49:2b
Communication Mode Ad-hoc
Authentication Type Open System
Encryption None
Network Channel -
On back of Router (fiber optic internet source)
Network Name (SSID)
2.4Ghz ARRIS-EC92
5GHz ARRIS-EC92-5G
Then many other names followed by numbers:
Preshared Key
Security Mode
WPS Pin
SN:
CMAC:
WAN MAC:
Would be most grateful if someone could help me get this set up. Have never had much luck with Brother Printers and LL unless use USB, but since this is a long-term setup would like to get it running wirelessly.
Re: Wireless Setup for Brother HL-L2380DW - CaperAsh - 05-20-2017
PS Just noticed that it is a 2360DW not 2380DW.
Re: Wireless Setup for Brother HL-L2380DW - Valtam - 07-17-2017
Sorry that your thread has not been answered yet. Do you still require help with this?
Re: Wireless Setup for Brother HL-L2380DW - bitsnpcs - 07-17-2017
Hello,
on your router press the WPS button.