Select Kernel Installer - Printable Version

Select Kernel Installer - Printable Version

+- Linux Lite Forums (https://www.linuxliteos.com/forums)
+-- Forum: Development (https://www.linuxliteos.com/forums/forumdisplay.php?fid=7)
+--- Forum: Linux Lite Software Development (https://www.linuxliteos.com/forums/forumdisplay.php?fid=30)
+--- Thread: Select Kernel Installer (/showthread.php?tid=2944)

Pages: 1 2 3 4

Select Kernel Installer - valtam - 05-28-2016

This is a very simple kernel installer I've started working on. At this stage, I haven't decided if this will develop into a LL package, but people have asked for it.

The code so far:

Code:
#! /bin/bash

#--------------------------------------------------------------------------------------------------------

# Name: Lite Kernel Select

# Description: Select a Linux Kernel to install on Linux Lite.

# Authors:  Jerry Bezencon

# Website: https://www.linuxliteos.com

#--------------------------------------------------------------------------------------------------------

# Ensure multi-language support

export LANG=C

# Kill off any package managers that may be running

if [ "$(pidof synaptic)" ] 

then

   sudo killall -9 synaptic

fi

if [ ! -z "$(pgrep gdebi-gtk)" ]

then

   killall -9 gdebi-gtk

fi

# Set the window icon variable

ic="/usr/share/icons/zenity-llcc.png"

# Set the Title bar variable

tb="Lite Kernel Select"

# Download message variable

dl="Downloading and installing Kernel"

# Update package list

zenity --question --title="$tb" --window-icon="$ic" --text="We will now fetch the Updates list.\n\nClick Yes to continue or No to abort."

   if [ "$?" -eq "0" ];then

    APTUPDATE=$(grep '^deb' -c /etc/apt/sources.list) # Total of repositories registered, this is approximated

    sudo apt-get update 2>&1 | awk -v total=$APTUPDATE '/^Ign|^ Get/{count++;$1=""} FNR { if (total != 0){percentage=int (100*count/total);print (percentage < 90?percentage:90),"\n#",substr($0, 0, 128) }; fflush(stdout)}' \

      | zenity --progress --text="Updating package lists..." --window-icon=$ic --title="Updating Software Sources - please wait..." --percentage=0 --auto-close --width=600

                                if [ "${PIPESTATUS[0]}" -ne "0" ]; then

                                        unset APTUPDATE

                                        zenity --error \

                                        --title="Error" --text="$APPNAME couldn't fetch the package cache information lists."

                                        exit 1

                                fi

unset APTUPDATE

KERNLIST=$(zenity --title="Select a Kernel from the list" \

--height=300 --width="320" \

--list --radiolist --text "Select a Kernel to install:" \

--column "Select" --column "Kernel Version" \

FALSE "Kernel 3.15.0" \

FALSE "Kernel 3.16.0" \

FALSE "Kernel 3.17.0" \

FALSE "Kernel 3.18.0" \

FALSE "Kernel 3.19.0" \

FALSE "Kernel 4.0.0" \

FALSE "Kernel 4.1.0" \

FALSE "Kernel 4.2.0" \

FALSE "Kernel 4.3.0" \

FALSE "Kernel 4.4.0" \

FALSE "Kernel 4.5.0" \

FALSE "Kernel 4.6.0")

if [[ "$KERNLIST" =~ "Kernel 3.15.0" ]]; then

    apt-get install linux-headers-linuxlite-3.15.0 linux-image-linuxlite-3.15.0 -y | zenity --progress --title="$tb" --text="$dl 3.15.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 3.16.0" ]]; then

    apt-get install linux-headers-linuxlite-3.16.0 linux-image-linuxlite-3.16.0 -y | zenity --progress --title="$tb" --text="$dl 3.16.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 3.17.0" ]]; then

    apt-get install linux-headers-linuxlite-3.17.0 linux-image-linuxlite-3.17.0 -y | zenity --progress --title="$tb" --text="$dl 3.17.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 3.18.0" ]]; then

    apt-get install linux-headers-linuxlite-3.18.0 linux-image-linuxlite-3.18.0 -y | zenity --progress --title="$tb" --text="$dl 3.18.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 3.19.0" ]]; then

    apt-get install linux-headers-linuxlite-3.19.0 linux-image-linuxlite-3.19.0 -y | zenity --progress --title="$tb" --text="$dl 3.19.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.0.0" ]]; then

    apt-get install linux-headers-linuxlite-4.0.0 linux-image-linuxlite-4.0.0 -y | zenity --progress --title="$tb" --text="$dl 4.0.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.1.0" ]]; then

    apt-get install linux-headers-linuxlite-4.1.0 linux-image-linuxlite-4.1.0 -y | zenity --progress --title="$tb" --text="$dl 4.1.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.2.0" ]]; then

    apt-get install linux-headers-linuxlite-4.2.0 linux-image-linuxlite-4.2.0 -y | zenity --progress --title="$tb" --text="$dl 4.2.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.3.0" ]]; then

    apt-get install linux-headers-linuxlite-4.3.0 linux-image-linuxlite-4.3.0 -y | zenity --progress --title="$tb" --text="$dl 4.3.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.4.0" ]]; then

    apt-get install linux-headers-linuxlite-4.4.0 linux-image-linuxlite-4.4.0 -y | zenity --progress --title="$tb" --text="$dl 4.4.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.5.0" ]]; then

    apt-get install linux-headers-linuxlite-4.5.0 linux-image-linuxlite-4.5.0 -y | zenity --progress --title="$tb" --text="$dl 4.5.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.6.0" ]]; then

    apt-get install linux-headers-linuxlite-4.6.0 linux-image-linuxlite-4.6.0 -y | zenity --progress --title="$tb" --text="$dl 4.6.0, please standby..." --pulsate --auto-kill --auto-close

            else

                                        zenity --error \

                                        --title="Error" --text="There was an error while\nDownloading and installing the Kernel!"

                        fi

fi

exit 0

Open a terminal:

Code:
touch kernelinstaller

copy the above code into kernelinstaller (open kernelinstaller with a Text Editor). Now save the file.

Code:
chmod +x kernelinstaller

gksudo ./kernelinstaller

There is no end dialogue, when the Zenity message has closed, you can reboot.

This is very Beta and as such, should only be installed in a VirtualBox. When you reboot, hold down Shift key to bring up Grub, go to Advanced, and you should see the Kernel in the list, select it and press enter.

To dos:

- Initial window "Install Kernel" and "Remove Kernel" select list
- Confirm kernel is installed dialogue
- Better output in zenity, percentage of install process (similar to updates-gui)
- Move just installed kernel to the top of the list in Grub before rebooting

You can use grub-customizer for now to move the kernel you chose to install, to the top of the Grub list.
Use Lite Tweaks to remove any kernels for now.

Any contributing code from dev's is welcome Smile

Re: Select Kernel Installer - Ottawagrant - 05-28-2016

Thank you for starting this. I have newer computer & older computers. The older computer really do like older kernels. On an older HP I installed the LL kernel from 2.0 onto 2.8 & the computer just hummed along. Understood that it's Beta, so I'll just make a note of it for now. This really helps for people who want to use LL 3.0 to 3.8.

Re: Select Kernel Installer - valtam - 05-28-2016

You can use this now to install a kernel, but that's all it does.

Re: Select Kernel Installer - firenice03 - 06-03-2016

Must say this is pretty slick tool...
I installed to the Mini - Running LL3.0 32bit.. Yes on a non-VM system.... Tried both 3.18 and 3.16..
Have a systemback back up on the in-case and am ok if I would have to start over..

I installed mainly to test for better hardware support for the USB WiFi.. For a rtl8192cu
On a note; I haven't seen any differences between the kernels as far as the hardware but the installer tool works really well.

Re: Select Kernel Installer - valtam - 06-03-2016

@firenice03, thanks for testing.

Re: Select Kernel Installer - firenice03 - 07-26-2016

Cause I like the tool Smile

I added the lines for kernel 4.7...

I just copied any 4.6 line and replaced the 4.6 with 4.7.. Should it work or not Tongue

but its downloading - something..
I'm again testing on the Mini... Others as Jerry suggests, for virtual box use...

Code:
#! /bin/bash

#--------------------------------------------------------------------------------------------------------

# Name: Lite Kernel Select

# Description: Select a Linux Kernel to install on Linux Lite.

# Authors:  Jerry Bezencon

# Website: https://www.linuxliteos.com

#--------------------------------------------------------------------------------------------------------

# Ensure multi-language support

export LANG=C

# Kill off any package managers that may be running

if [ "$(pidof synaptic)" ]

then

   sudo killall -9 synaptic

fi

if [ ! -z "$(pgrep gdebi-gtk)" ]

then

   killall -9 gdebi-gtk

fi

# Set the window icon variable

ic="/usr/share/icons/zenity-llcc.png"

# Set the Title bar variable

tb="Lite Kernel Select"

# Download message variable

dl="Downloading and installing Kernel"

# Update package list

zenity --question --title="$tb" --window-icon="$ic" --text="We will now fetch the Updates list.\n\nClick Yes to continue or No to abort."

   if [ "$?" -eq "0" ];then

    APTUPDATE=$(grep '^deb' -c /etc/apt/sources.list) # Total of repositories registered, this is approximated

    sudo apt-get update 2>&1 | awk -v total=$APTUPDATE '/^Ign|^ Get/{count++;$1=""} FNR { if (total != 0){percentage=int (100*count/total);print (percentage < 90?percentage:90),"\n#",substr($0, 0, 128) }; fflush(stdout)}' \

      | zenity --progress --text="Updating package lists..." --window-icon=$ic --title="Updating Software Sources - please wait..." --percentage=0 --auto-close --width=600

                                if [ "${PIPESTATUS[0]}" -ne "0" ]; then

                                        unset APTUPDATE

                                        zenity --error \

                                        --title="Error" --text="$APPNAME couldn't fetch the package cache information lists."

                                        exit 1

                                fi

unset APTUPDATE

KERNLIST=$(zenity --title="Select a Kernel from the list" \

--height=300 --width="320" \

--list --radiolist --text "Select a Kernel to install:" \

--column "Select" --column "Kernel Version" \

FALSE "Kernel 3.15.0" \

FALSE "Kernel 3.16.0" \

FALSE "Kernel 3.17.0" \

FALSE "Kernel 3.18.0" \

FALSE "Kernel 3.19.0" \

FALSE "Kernel 4.0.0" \

FALSE "Kernel 4.1.0" \

FALSE "Kernel 4.2.0" \

FALSE "Kernel 4.3.0" \

FALSE "Kernel 4.4.0" \

FALSE "Kernel 4.5.0" \

FALSE "Kernel 4.6.0" \

FALSE "Kernel 4.7.0")

if [[ "$KERNLIST" =~ "Kernel 3.15.0" ]]; then

    apt-get install linux-headers-linuxlite-3.15.0 linux-image-linuxlite-3.15.0 -y | zenity --progress --title="$tb" --text="$dl 3.15.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 3.16.0" ]]; then

    apt-get install linux-headers-linuxlite-3.16.0 linux-image-linuxlite-3.16.0 -y | zenity --progress --title="$tb" --text="$dl 3.16.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 3.17.0" ]]; then

    apt-get install linux-headers-linuxlite-3.17.0 linux-image-linuxlite-3.17.0 -y | zenity --progress --title="$tb" --text="$dl 3.17.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 3.18.0" ]]; then

    apt-get install linux-headers-linuxlite-3.18.0 linux-image-linuxlite-3.18.0 -y | zenity --progress --title="$tb" --text="$dl 3.18.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 3.19.0" ]]; then

    apt-get install linux-headers-linuxlite-3.19.0 linux-image-linuxlite-3.19.0 -y | zenity --progress --title="$tb" --text="$dl 3.19.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.0.0" ]]; then

    apt-get install linux-headers-linuxlite-4.0.0 linux-image-linuxlite-4.0.0 -y | zenity --progress --title="$tb" --text="$dl 4.0.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.1.0" ]]; then

    apt-get install linux-headers-linuxlite-4.1.0 linux-image-linuxlite-4.1.0 -y | zenity --progress --title="$tb" --text="$dl 4.1.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.2.0" ]]; then

    apt-get install linux-headers-linuxlite-4.2.0 linux-image-linuxlite-4.2.0 -y | zenity --progress --title="$tb" --text="$dl 4.2.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.3.0" ]]; then

    apt-get install linux-headers-linuxlite-4.3.0 linux-image-linuxlite-4.3.0 -y | zenity --progress --title="$tb" --text="$dl 4.3.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.4.0" ]]; then

    apt-get install linux-headers-linuxlite-4.4.0 linux-image-linuxlite-4.4.0 -y | zenity --progress --title="$tb" --text="$dl 4.4.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.5.0" ]]; then

    apt-get install linux-headers-linuxlite-4.5.0 linux-image-linuxlite-4.5.0 -y | zenity --progress --title="$tb" --text="$dl 4.5.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.6.0" ]]; then

    apt-get install linux-headers-linuxlite-4.6.0 linux-image-linuxlite-4.6.0 -y | zenity --progress --title="$tb" --text="$dl 4.6.0, please standby..." --pulsate --auto-kill --auto-close

elif [[ "$KERNLIST" =~ "Kernel 4.7.0" ]]; then

    apt-get install linux-headers-linuxlite-4.7.0 linux-image-linuxlite-4.7.0 -y | zenity --progress --title="$tb" --text="$dl 4.7.0, please standby..." --pulsate --auto-kill --auto-close

            else

                                        zenity --error \

                                        --title="Error" --text="There was an error while\nDownloading and installing the Kernel!"

                        fi

fi

exit 0

Update
After letting run the better of an hour, the install box didn't close so I did and rebooted... Mini is on 4.7 so far so good after initial tests...

Re: Select Kernel Installer - tomt - 08-22-2016

Thought this might be of interest.

http://www.infoworld.com/article/3109184/linux/its-time-to-upgrade-to-linux-471.html

And this.

http://www.computerworld.com/article/3110504/linux/another-day-another-4600-lines-of-linux-kernel-code.html#tk.rss_all

On topic.

Re: Select Kernel Installer - firenice03 - 04-27-2017

So I'm setting up a fresh install of 3.4 on the mini and going for 4.10 kernel = as I'm waiting for install.. I remembered how slick this tool was..

Curious if there was any traction?? Or something for the future??

Re: Select Kernel Installer - valtam - 04-27-2017

Probably not, when there is something like this - http://www.omgubuntu.co.uk/2017/02/ukuu-easy-way-to-install-mainline-kernel-ubuntu

Re: Select Kernel Installer - ralphy - 04-27-2017

Hmmm... could it be considered as a Lite Tweak maybe? That application is for Mainline kernels and it will require adding PPAs and what not. A simple Lite Tweak addition could possibly cover this... the code is already there for the most part.