Linux Lite Forums
Hardware - Support => Printing and Scanning => Topic started by: Paul74 on July 01, 2020, 11:50:36 AM
-
Hello,
This printer is correctly working under LL 4.8 from several PC's.
Under LL 5.0 I get message "rendering completed". And printer tasks are stopped and stay in the printer queue.
I downloaded the most recent printer driver from HP site (as HP is now managing Samsung laser printers), installation without any problem.
The printer is founded by LL, I am able to get information concerning toner level from "properties" panel.
Firewall is disabled.
Avahi returns :
Welcome to Linux Lite 5.0 pnp
mercredi 01 juillet 2020, 17:30:56
Memory Usage: 992/7942MB (12.49%)
Disk Usage: 19/110GB (18%)
Support - https://www.linuxliteos.com/forums/ (https://www.linuxliteos.com/forums/) (Right click, Open Link)
pnp ~ avahi-browse --all --ignore-local --resolve --terminate
+ wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A) Internet Printer local
+ wlp3s0 IPv4 LIVEBOX Web Site local
+ wlp3s0 IPv4 LIVEBOX [b8:26:6c:79:54:a1] Workstation local
+ wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A) PDL Printer local
+ wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A) UNIX Printer local
= wlp3s0 IPv4 LIVEBOX Web Site local
hostname = [LIVEBOX.local]
address = [192.168.1.1]
port = [80]
txt = []
= wlp3s0 IPv4 LIVEBOX [b8:26:6c:79:54:a1] Workstation local
hostname = [LIVEBOX.local]
address = [192.168.1.1]
port = [9]
txt = []
+ wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A) Web Site local
= wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A) Web Site local
hostname = [SEC84251905E24A.local]
address = [192.168.1.154]
port = [80]
txt = ["XRASelfReg=3"]
+ wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A) _privet._tcp local
= wlp3s0 IPv4 Samsung C43x Series (SEC84251905E24A) _privet._tcp local
hostname = [SEC84251905E24A.local]
address = [192.168.1.154]
port = [80]
txt = ["cs=online" "id=" "type=printer" "url=https://www.google.com/cloudprint" "ty=Samsung SEC84251905E24A" "note=Samsung Cloud-Ready Printer C43x Series" "txtvers=1"]
Échec de résolution du service « Samsung C43x Series (SEC84251905E24A) » de type « _ipp._tcp » dans le domaine « local » : Temps d'attente écoulé
Échec de résolution du service « Samsung C43x Series (SEC84251905E24A) » de type « _pdl-datastream._tcp » dans le domaine « local » : Temps d'attente écoulé
Échec de résolution du service « Samsung C43x Series (SEC84251905E24A) » de type « _printer._tcp » dans le domaine « local » : Temps d'attente écoulé
pnp ~
Thanks in advance for your help and informations
-
Hello !
I ran a test using LL5.0 USB key to boot on. Start OK. I didn't install additional driver or piece of software.
I started Samsung printer and go to "printer" panel from "system" entry of the main menu.
My Samsung printer was rapidly detected but i got message "Server-error-internal-error".
-
Hello,
I ran some testing after a clean LL 5.0 reinstall.
I alway get same problem.
Comparing printer parameters LL4.8 vs LL 5.0 show many differences :
In both cases, printer driver is the same version : 1.00.39_01.17, and I defined printer as using IPP protocol.
LL 4.8 :
- driver appears as C43x.ppd
- driver version appears as Version 1.0
- Printer name : Samsung C43x
LL 5.0 :
- driver is ippeve.ppd
- driver version 2.2
- printer name looks "fancy" : Samsung-C43x_series_%SEC%84251%.........
The main difference is the CUPS version, I deduct (may be I am wrong...) theproble come from this new version of CUPS distributed with LL 5.0.
-
Hello,
I re-installed LL 5.0 and don't download printer driver from Samsung site.
During installation I selected Generic IPP Everywhere driver and it works !
So, where is the incompatibilty ? Either CUPS 2.3.x, either Samsung driver downloaded from Samsung site.
-
Hello,
I just discovered a very important information about Samsung printers :
https://www.bchemnet.com/suldr/forum/index.php?topic=366.0
In two words : Samsung printers will not be supported by new releases of operating system as HP doesn't maintain driver's updates.
-
Hello,
Back to LinuxLite 4.8 to be able to use this Samsung printer.....
-
Hello,
I did some testing using LL 5.2....and Samsung Printer C430W is now working fine !
Very simple :
When looking for a driver during printer definition, just tell to CUPS to use driver for Samsung C410 as this printer is supported.
I guess this driver is from Gutenberg and included in CUPS.
I did that as I saw Samsung drivers for both C 410 and C430 were the sames in the past.