Linux Lite Forums

Hardware - Support => Printing and Scanning => Topic started by: raysr11 on May 13, 2014, 02:01:27 PM

Title: Kodak 3200 All in One
Post by: raysr11 on May 13, 2014, 02:01:27 PM

I'm using Linux Lite 1.0.8.  I'm trying to get a Kodak 3200 to work with it.  I have downloaded the drivers from synaptic.  Lite see's the printer but it won't print.  Can anyone help me with this?


Thanks

Title: Re: Kodak 3200 All in One
Post by: Jerry on May 13, 2014, 11:28:30 PM

Try removing the printer, and re-adding it. Also, what driver or software did you get from Synaptic?

Title: Re: Kodak 3200 All in One
Post by: raysr11 on May 16, 2014, 12:06:45 PM

I'm at a different location now than the computer I'm working with but I didn't use the one at "Sourceforge".  Whatever driver is packaged in Synaptic.  I did disconnect and reconnect with no success.

Title: Re: Kodak 3200 All in One
Post by: N4RPS on May 17, 2014, 12:22:54 AM

Hello!

Sadly, Linux printer support varies widely from manufacturer to manufacturer. Some can't see much beyond Windows or Mac.

Try this, gleaned from http://ubuntuforums.org/showthread.php?t=1656550 (http://ubuntuforums.org/showthread.php?t=1656550):

http://sourceforge.net/projects/cupsdriverkodak/ (http://sourceforge.net/projects/cupsdriverkodak/)

I also ran into this:

https://apps.ubuntu.com/cat/applications/raring/printer-driver-c2esp/ (https://apps.ubuntu.com/cat/applications/raring/printer-driver-c2esp/). It's said this works fairly well on the 3200 AIO series.

That same post went on to suggest that for Linux, you're better off using something else besides a Kodak printer...

73 DE N4RPS
Rob

Title: Re: Kodak 3200 All in One
Post by: raysr11 on May 17, 2014, 03:06:47 AM

Being new to this I downloaded the tar file from sourceforge and extracted it.  Then I did this "tar -xzf c2esp-27.tar.gz
cd c2esp-27

 Configured (./configure) >make, and ended up with this error -"make  all-recursive
make[1]: Entering directory `/home/ray/Downloads/c2esp-27'
Making all in src
make[2]: Entering directory `/home/ray/Downloads/c2esp-27/src'
gcc -DHAVE_CONFIG_H -I. -I..    --pedantic -Wall -std=c99 -O2 -g -O2 -MT c2esp.o -MD -MP -MF .deps/c2esp.Tpo -c -o c2esp.o c2esp.c
c2esp.c:36:25: fatal error: cups/raster.h: No such file or directory
 #include <cups/raster.h>
                         ^
compilation terminated.
make[2]: *** [c2esp.o] Error 1
make[2]: Leaving directory `"

What did I do wrong?

Title: Re: Kodak 3200 All in One
Post by: N4RPS on May 17, 2014, 09:56:21 PM

Hello!

I went back out there and dug around some more for you.

You can go to the following link and download the file you need there as a .deb file, which you can then install using GDebi. Depending on whether you have the 32-bit (i386) or 64-bit (amd64) version of LL installed, download the appropriate file:

For LL 1.0.6/1.0.8: http://packages.ubuntu.com/precise/printer-driver-c2esp (http://packages.ubuntu.com/precise/printer-driver-c2esp)
For LL 2.0 beta:      http://packages.ubuntu.com/trusty/printer-driver-c2esp (http://packages.ubuntu.com/trusty/printer-driver-c2esp)

Depending on whether you have the 32-bit (i386) or 64-bit (amd64) version installed, download the appropriate file. GDebi will fetch any needed dependencies for you (or will tell you what you need), whereas if you try to compile from source, you have to figure all this out for yourself. Additionally, compiling from source requires a bunch of extra dependencies you probably don't have installed.

If yat all possible, avoid compiling ANYTHING *YOURSELF* like the plague...

73 DE N4RPS
Rob