Hardware - Support > Printing and Scanning
Epson XP-245
Jerry:
Great :)
Derekg:
Jerry, i did what you said and got no errors when installing the driver software. I rebooted my computer and did a test with the scanner, and it works so does the printing. Cheers for everyone that helped out.
Jerry:
The printer is already supported by the kernel. If for some reason the printer does not set up and self-config, do:
--- Code: ---sudo apt-get install printer-driver-escpr
--- End code ---
or
Printer driver: https://download3.ebz.epson.net/dsc/f/03/00/10/49/18/41ef4e1bb2cb43759ae3173912fde3c37f9f4b98/epson-inkjet-printer-escpr_1.7.7-1lsb3.2_amd64.deb
Utility: https://download3.ebz.epson.net/dsc/f/03/00/11/97/70/5377488cf4e01752ab830e31774ea3636b5b41f4/epson-printer-utility_1.1.1-1lsb3.2_amd64.deb
Jerry:
This is getting over-complicated.
Undo ALL that you have done to date, I don't know why people are suggesting what they have so far. I'm sure the intent is good, but the research needs to be 100% accurate.
Don't do ANY of the below until you have undone previous work. Remove any Epson printers listed in Printers, then reboot before proceeding.
Download - https://download2.ebz.epson.net/imagescanv3/ubuntu/lts1/deb/x64/imagescan-bundle-ubuntu-20.04-3.63.0.x64.deb.tar.gz
Extract package.
Open extracted folder. Right click Open Terminal here.
--- Code: ---sudo su
--- End code ---
enter password.
--- Code: ---./install.sh
--- End code ---
follow instructions.
If you get errors, it will be because you have missed a step or not followed the instructions provided to the letter.
Derekg:
I used sudo ./install.sh in the directory of the driver i downloaded, but still get the same error message.
Navigation
[0] Message Index
[#] Next page
Go to full version