Software - Support > Other

Update Failure this morning

(1/2) > >>

Şerban S.:

--- Quote from: llite001 on February 24, 2021, 04:13:27 AM ---[...] How do you plan your multi instance partitions? I got the recommendation from a webpage showing how to install multiple instances of Linux [...]

--- End quote ---

Hello!
It is a poor strategy that "recommended" one. The author, seems to be a rookie.
Here is the interesting part:
(1) Linux is capable to use the same SWAP partition, regardless the number or type of installation. So, you only need ONE SWAP PARTITION.
(2) Second aspect, is REUSING THE /home partition.
The last thing I would like, is to do again and again the same settings for all applications I am running. So, I use a /home partition. This holds all the specific config and user data for all apps I use.
(3) Now, let's go to the main issue: Any Linux distro, uses at most 14 GB of disk space, considering that you make a heavy use of lots of apps. Otherwise, it takes some 8 - 9 GB. So, You need at most 16 GB/ installation.
(4) At setup time, you need to set up the default mounted partitions. And here it comes the /home partition. Use it, without formatting. You need to know exactly the name of the partition (Say... /dev/sda6). In order to avoid heavy lifting trouble, I use the ext2 FS for the /home, so I can see exactely which one is the /home. Even more, I use a certain size for this partition: 60 GB. I usually use some 6 - 8 GB of it, but sometimes I need more, so it fits my needs. In case you make a heavy use of /home, you might need to reserve more than 60 GB. I prefer using dedicated partitions for my projects, such as /projects, /video, /mydat, etc. This allows me to backup as needed, instead of making a single huge backup.
And in the end...
Now, assuming that you want to have a lot of installations, you need to do some basic maths, as follows:
N Linuxes x 15 GB = ? (N = ?)
SWAP = ?
/home = ?
/datapartition1 = ?
/datapartition2 = ?
...
------------------
TOTALS = [0,95 x DriveSize] = ?
It would be great to know exactly how much space uses each FULL installation, since this will help save some disk space and this sometimes means more than 1 - 2 GB. Might be up to 5 - 8 GB/ each installation!

Good luck! ;) :)
Best regards! :)

trinidad:
Recommendation #1: Use Lite Tweaks. It's quite efficient and designed to keep you out of the CLI. Cleans package cache, removes old kernels, removes old packages, frees up system memory.
I don't have a single LL installation that uses over 8gig jfs on the disk, nor does anybody I know. My Debian 10 gnome system, which has everything but the kitchen sink installed on it, only has about a 40 to 50gig file system, dependent on how many VMs I'm running at the time. If you know you are going to save large amounts of media, setup a media storage partition separate from your system. How much memory are you allocating to Linux Lite? Are you specifying a certain amount of memory? When you do so installation automatically configures swap file accordingly. Have you been regularly compiling software on these systems? Have you had multiple failed or interrupted updates on either? Safe rule of thumb for Linux Lite, 21gig disk space, 3 to 4gig of memory and system should never be memory challenged or disk space challenged throughout the series release cycle.
Recommendation #2: Use Lite Tweaks

TC

stevef:
As you've found 20GB can be a restriction for a working system.  Suggesting good practice for partition sizes is difficult as everyone's needs are different.  I think the 20GB recommendation may assume your /home directories are on another partition or that you aren't going to be keeping a lot of user data.

I have a couple of machines for general tasks.  One has a 250GB SSD and is solely for LL ver 5.2 and the SSD is currently is 7% used.  This machine also has a 1.5TB drive for user data which is 50% full. The choice to use the full SSD for LL was straight forward as I had no need to compromise.

The second machine came to me as a 1TB disk Win10 machine.  I wanted to use LL on it but needed to retain W10 for some applications so needed to dual boot.  I shrank the main Windows partition down to 300GB which left 200GB free space for W10 to use and set the LL partition to 200GB.  200GB is probably too much for LL but the machine had 600GB of free space and there is still 400GB unused space I can use for expansion of LL 5.2 or installing another system.

I understand it is possible to relocate partitions with gparted (or similar tool) but it's not something I've done.

I'm a bit confused by your post - are you also having a space problem installing updates in the LLite2 installation which has 60G and is showing 40G free ?

llite001:
I will try it on the other one, but just looking at GParted (image as PNG in tar.gz attachment) I see what you mean, the original Instance is showing 19.53 GiB size and 18.78 GiB used. Given the sequence of Partitions, what would be the best way to increase that one without messing things up. Bodhi is right up against it in the sequence. Or am I better off expanding LLITE2 and doing away with Linux Lite?

How do you plan your multi instance partitions? I got the recommendation from a webpage showing how to install multiple instances of Linux and the recommendation was 20 GiB for each. Obviously after installing a few programs that doesn't suffice. It's not like I have space issues allocating more on the 2 TiB SSD  ;D Just didn't know what would be a good practice as partitions are not dynamic and I didn't realise moving them around would be inflexible. I understood the recommendation had inbuilt flexibility.  :o ::) Obviously misunderstood...

Thanks again

llite001:
So after running both commands requested above I re-ran the update installation on one of the two LLite instances and seem to have a better result:


--- Quote ---Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages were automatically installed and are no longer required:
  linux-headers-5.4.0-65 linux-headers-5.4.0-65-generic
  linux-image-5.4.0-65-generic linux-modules-5.4.0-65-generic
  linux-modules-extra-5.4.0-65-generic
Use 'apt autoremove' to remove them.
The following NEW packages will be installed:
  linux-headers-5.4.0-66 linux-headers-5.4.0-66-generic
  linux-image-5.4.0-66-generic linux-modules-5.4.0-66-generic
  linux-modules-extra-5.4.0-66-generic
The following packages will be upgraded:
  gir1.2-gdkpixbuf-2.0 grub-common grub-efi-amd64-bin grub-efi-amd64-signed
  grub-pc grub-pc-bin grub2-common libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common
  libldap-2.4-2 libldap-common linux-generic linux-headers-generic
  linux-image-generic linux-libc-dev signal-desktop thunderbird
  thunderbird-locale-en thunderbird-locale-en-gb thunderbird-locale-en-us
20 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 242 MB of archives.
After this operation, 393 MB of additional disk space will be used.
Get:1 https://updates.signal.org/desktop/apt xenial/main amd64 signal-desktop amd64 1.40.1 [110 MB]
Get:2 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 libgdk-pixbuf2.0-common all 2.40.0+dfsg-3ubuntu0.2 [4.652 B]
Get:3 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 libgdk-pixbuf2.0-0 amd64 2.40.0+dfsg-3ubuntu0.2 [168 kB]
Get:4 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 gir1.2-gdkpixbuf-2.0 amd64 2.40.0+dfsg-3ubuntu0.2 [8.268 B]
Get:5 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 libldap-common all 2.4.49+dfsg-2ubuntu1.7 [17,1 kB]
Get:6 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 libldap-2.4-2 amd64 2.4.49+dfsg-2ubuntu1.7 [155 kB]
Get:7 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 linux-libc-dev amd64 5.4.0-66.74 [1.139 kB]
Get:8 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 grub-pc amd64 2.04-1ubuntu26.9 [125 kB]
Get:9 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 grub2-common amd64 2.04-1ubuntu26.9 [592 kB]
Get:10 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 grub-pc-bin amd64 2.04-1ubuntu26.9 [971 kB]
Get:11 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 grub-efi-amd64-signed amd64 1.142.11+2.04-1ubuntu26.9 [470 kB]
Get:12 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 grub-efi-amd64-bin amd64 2.04-1ubuntu26.9 [703 kB]
Get:13 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 grub-common amd64 2.04-1ubuntu26.9 [1.877 kB]
Get:14 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 linux-modules-5.4.0-66-generic amd64 5.4.0-66.74 [14,5 MB]
Get:15 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 linux-image-5.4.0-66-generic amd64 5.4.0-66.74 [8.891 kB]
Get:16 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 linux-modules-extra-5.4.0-66-generic amd64 5.4.0-66.74 [38,6 MB]
Get:17 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 linux-generic amd64 5.4.0.66.69 [1.896 B]
Get:18 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 linux-image-generic amd64 5.4.0.66.69 [2.636 B]
Get:19 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 linux-headers-5.4.0-66 all 5.4.0-66.74 [11,0 MB]
Get:20 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 linux-headers-5.4.0-66-generic amd64 5.4.0-66.74 [1.256 kB]
Get:21 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 linux-headers-generic amd64 5.4.0.66.69 [2.496 B]
Get:22 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 thunderbird-locale-en amd64 1:78.7.1+build1-0ubuntu0.20.04.1 [898 kB]
Get:23 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 thunderbird amd64 1:78.7.1+build1-0ubuntu0.20.04.1 [50,7 MB]
Get:24 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 thunderbird-locale-en-gb all 1:78.7.1+build1-0ubuntu0.20.04.1 [9.180 B]
Get:25 http://mirrors.lug.mtu.edu/ubuntu focal-updates/main amd64 thunderbird-locale-en-us all 1:78.7.1+build1-0ubuntu0.20.04.1 [9.188 B]
Preconfiguring packages ...
Fetched 242 MB in 1min 31s (2.654 kB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 356634 files and directories currently installed.)
Preparing to unpack .../libgdk-pixbuf2.0-common_2.40.0+dfsg-3ubuntu0.2_all.deb ...
Unpacking libgdk-pixbuf2.0-common (2.40.0+dfsg-3ubuntu0.2) over (2.40.0+dfsg-3ubuntu0.1) ...
Setting up libgdk-pixbuf2.0-common (2.40.0+dfsg-3ubuntu0.2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 356634 files and directories currently installed.)
Preparing to unpack .../libgdk-pixbuf2.0-0_2.40.0+dfsg-3ubuntu0.2_amd64.deb ...
Unpacking libgdk-pixbuf2.0-0:amd64 (2.40.0+dfsg-3ubuntu0.2) over (2.40.0+dfsg-3ubuntu0.1) ...
Setting up libgdk-pixbuf2.0-0:amd64 (2.40.0+dfsg-3ubuntu0.2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 356634 files and directories currently installed.)
Preparing to unpack .../gir1.2-gdkpixbuf-2.0_2.40.0+dfsg-3ubuntu0.2_amd64.deb ...
Unpacking gir1.2-gdkpixbuf-2.0:amd64 (2.40.0+dfsg-3ubuntu0.2) over (2.40.0+dfsg-3ubuntu0.1) ...
Setting up gir1.2-gdkpixbuf-2.0:amd64 (2.40.0+dfsg-3ubuntu0.2) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 356634 files and directories currently installed.)
Preparing to unpack .../libldap-common_2.4.49+dfsg-2ubuntu1.7_all.deb ...
Unpacking libldap-common (2.4.49+dfsg-2ubuntu1.7) over (2.4.49+dfsg-2ubuntu1.6) ...
Setting up libldap-common (2.4.49+dfsg-2ubuntu1.7) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 356634 files and directories currently installed.)
Preparing to unpack .../libldap-2.4-2_2.4.49+dfsg-2ubuntu1.7_amd64.deb ...
Unpacking libldap-2.4-2:amd64 (2.4.49+dfsg-2ubuntu1.7) over (2.4.49+dfsg-2ubuntu1.6) ...
Setting up libldap-2.4-2:amd64 (2.4.49+dfsg-2ubuntu1.7) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 356634 files and directories currently installed.)
Preparing to unpack .../linux-libc-dev_5.4.0-66.74_amd64.deb ...
Unpacking linux-libc-dev:amd64 (5.4.0-66.74) over (5.4.0-65.73) ...
Setting up linux-libc-dev:amd64 (5.4.0-66.74) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 356634 files and directories currently installed.)
Preparing to unpack .../00-grub-pc_2.04-1ubuntu26.9_amd64.deb ...
Unpacking grub-pc (2.04-1ubuntu26.9) over (2.04-1ubuntu26.8) ...
Preparing to unpack .../01-grub2-common_2.04-1ubuntu26.9_amd64.deb ...
Unpacking grub2-common (2.04-1ubuntu26.9) over (2.04-1ubuntu26.8) ...
Preparing to unpack .../02-grub-pc-bin_2.04-1ubuntu26.9_amd64.deb ...
Unpacking grub-pc-bin (2.04-1ubuntu26.9) over (2.04-1ubuntu26.8) ...
Preparing to unpack .../03-grub-efi-amd64-signed_1.142.11+2.04-1ubuntu26.9_amd64.deb ...
Unpacking grub-efi-amd64-signed (1.142.11+2.04-1ubuntu26.9) over (1.142.10+2.04-1ubuntu26.8) ...
Preparing to unpack .../04-grub-efi-amd64-bin_2.04-1ubuntu26.9_amd64.deb ...
Unpacking grub-efi-amd64-bin (2.04-1ubuntu26.9) over (2.04-1ubuntu26.8) ...
Preparing to unpack .../05-grub-common_2.04-1ubuntu26.9_amd64.deb ...
Unpacking grub-common (2.04-1ubuntu26.9) over (2.04-1ubuntu26.8) ...
Selecting previously unselected package linux-modules-5.4.0-66-generic.
Preparing to unpack .../06-linux-modules-5.4.0-66-generic_5.4.0-66.74_amd64.deb ...
Unpacking linux-modules-5.4.0-66-generic (5.4.0-66.74) ...
Selecting previously unselected package linux-image-5.4.0-66-generic.
Preparing to unpack .../07-linux-image-5.4.0-66-generic_5.4.0-66.74_amd64.deb ...
Unpacking linux-image-5.4.0-66-generic (5.4.0-66.74) ...
Selecting previously unselected package linux-modules-extra-5.4.0-66-generic.
Preparing to unpack .../08-linux-modules-extra-5.4.0-66-generic_5.4.0-66.74_amd64.deb ...
Unpacking linux-modules-extra-5.4.0-66-generic (5.4.0-66.74) ...
Preparing to unpack .../09-linux-generic_5.4.0.66.69_amd64.deb ...
Unpacking linux-generic (5.4.0.66.69) over (5.4.0.65.68) ...
Preparing to unpack .../10-linux-image-generic_5.4.0.66.69_amd64.deb ...
Unpacking linux-image-generic (5.4.0.66.69) over (5.4.0.65.68) ...
Selecting previously unselected package linux-headers-5.4.0-66.
Preparing to unpack .../11-linux-headers-5.4.0-66_5.4.0-66.74_all.deb ...
Unpacking linux-headers-5.4.0-66 (5.4.0-66.74) ...
Selecting previously unselected package linux-headers-5.4.0-66-generic.
Preparing to unpack .../12-linux-headers-5.4.0-66-generic_5.4.0-66.74_amd64.deb ...
Unpacking linux-headers-5.4.0-66-generic (5.4.0-66.74) ...
Preparing to unpack .../13-linux-headers-generic_5.4.0.66.69_amd64.deb ...
Unpacking linux-headers-generic (5.4.0.66.69) over (5.4.0.65.68) ...
Preparing to unpack .../14-thunderbird-locale-en_1%3a78.7.1+build1-0ubuntu0.20.04.1_amd64.deb ...
Unpacking thunderbird-locale-en (1:78.7.1+build1-0ubuntu0.20.04.1) over (1:68.10.0+build1-0ubuntu0.20.04.1) ...
Preparing to unpack .../15-thunderbird_1%3a78.7.1+build1-0ubuntu0.20.04.1_amd64.deb ...
Unpacking thunderbird (1:78.7.1+build1-0ubuntu0.20.04.1) over (1:68.10.0+build1-0ubuntu0.20.04.1) ...
Preparing to unpack .../16-thunderbird-locale-en-gb_1%3a78.7.1+build1-0ubuntu0.20.04.1_all.deb ...
Unpacking thunderbird-locale-en-gb (1:78.7.1+build1-0ubuntu0.20.04.1) over (1:68.10.0+build1-0ubuntu0.20.04.1) ...
Preparing to unpack .../17-thunderbird-locale-en-us_1%3a78.7.1+build1-0ubuntu0.20.04.1_all.deb ...
Unpacking thunderbird-locale-en-us (1:78.7.1+build1-0ubuntu0.20.04.1) over (1:68.10.0+build1-0ubuntu0.20.04.1) ...
Preparing to unpack .../18-signal-desktop_1.40.1_amd64.deb ...
Unpacking signal-desktop (1.40.1) over (1.40.0) ...
Setting up linux-headers-5.4.0-66 (5.4.0-66.74) ...
Setting up linux-modules-5.4.0-66-generic (5.4.0-66.74) ...
Setting up grub-common (2.04-1ubuntu26.9) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
Setting up signal-desktop (1.40.1) ...
Setting up thunderbird (1:78.7.1+build1-0ubuntu0.20.04.1) ...
Setting up grub-efi-amd64-bin (2.04-1ubuntu26.9) ...
Setting up linux-image-5.4.0-66-generic (5.4.0-66.74) ...
I: /boot/vmlinuz.old is now a symlink to vmlinuz-5.4.0-65-generic
I: /boot/initrd.img.old is now a symlink to initrd.img-5.4.0-65-generic
I: /boot/vmlinuz is now a symlink to vmlinuz-5.4.0-66-generic
I: /boot/initrd.img is now a symlink to initrd.img-5.4.0-66-generic
Setting up grub2-common (2.04-1ubuntu26.9) ...
Setting up linux-headers-5.4.0-66-generic (5.4.0-66.74) ...
/etc/kernel/header_postinst.d/dkms:
 * dkms: running auto installation service for kernel 5.4.0-66-generic
   ...done.
Setting up linux-headers-generic (5.4.0.66.69) ...
Setting up linux-modules-extra-5.4.0-66-generic (5.4.0-66.74) ...
Setting up thunderbird-locale-en (1:78.7.1+build1-0ubuntu0.20.04.1) ...
Setting up grub-pc-bin (2.04-1ubuntu26.9) ...
Setting up grub-pc (2.04-1ubuntu26.9) ...
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found background: /boot/grub_linux_lite.png
Warning: Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.
Found background image: /boot/grub_linux_lite.png
Found linux image: /boot/vmlinuz-5.4.0-66-generic
Found linux image: /boot/vmlinuz-5.4.0-65-generic
Found initrd image: /boot/initrd.img-5.4.0-65-generic
Found linux image: /boot/vmlinuz-5.4.0-60-generic
Found initrd image: /boot/initrd.img-5.4.0-60-generic
Found linux image: /boot/vmlinuz-5.4.0-59-generic
Found initrd image: /boot/initrd.img-5.4.0-59-generic
Found linux image: /boot/vmlinuz-5.4.0-56-generic
Found initrd image: /boot/initrd.img-5.4.0-56-generic
Found linux image: /boot/vmlinuz-5.4.0-52-generic
Found initrd image: /boot/initrd.img-5.4.0-52-generic
Found Ubuntu 18.04.5 LTS (18.04) on /dev/sda5
Found Linux Lite 5.2 (20.04) on /dev/sda9
done
Setting up thunderbird-locale-en-us (1:78.7.1+build1-0ubuntu0.20.04.1) ...
Setting up thunderbird-locale-en-gb (1:78.7.1+build1-0ubuntu0.20.04.1) ...
Setting up linux-image-generic (5.4.0.66.69) ...
Setting up grub-efi-amd64-signed (1.142.11+2.04-1ubuntu26.9) ...
Installing grub to /boot/efi.
Installing for x86_64-efi platform.
Installation finished. No error reported.
Setting up linux-generic (5.4.0.66.69) ...
Processing triggers for libc-bin (2.31-0ubuntu9.2) ...
Processing triggers for systemd (245.4-4ubuntu3.4) ...
Processing triggers for man-db (2.9.1-1) ...
/usr/bin/mandb: can't write to /var/cache/man/22573: No space left on device
/usr/bin/mandb: can't create index cache /var/cache/man/22573: No space left on device
Processing triggers for install-info (6.7.0.dfsg.2-5) ...
Processing triggers for desktop-file-utils (0.24-1ubuntu3) ...
Processing triggers for mime-support (3.64ubuntu1) ...
Processing triggers for hicolor-icon-theme (0.17-2) ...
Processing triggers for gnome-menus (3.36.0-1ubuntu1) ...
Processing triggers for linux-image-5.4.0-66-generic (5.4.0-66.74) ...
/etc/kernel/postinst.d/dkms:
 * dkms: running auto installation service for kernel 5.4.0-66-generic
   ...done.
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-5.4.0-66-generic
I: The initramfs will attempt to resume from /dev/sda3
I: (UUID=4b3a456f-c8ed-4438-bfa6-1cb7de009588)
I: Set the RESUME variable to override this.
/etc/kernel/postinst.d/zz-update-grub:
Sourcing file `/etc/default/grub'
Sourcing file `/etc/default/grub.d/init-select.cfg'
Generating grub configuration file ...
Found background: /boot/grub_linux_lite.png
Warning: Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.
Found background image: /boot/grub_linux_lite.png
Found linux image: /boot/vmlinuz-5.4.0-66-generic
Found initrd image: /boot/initrd.img-5.4.0-66-generic
Found linux image: /boot/vmlinuz-5.4.0-65-generic
Found initrd image: /boot/initrd.img-5.4.0-65-generic
Found linux image: /boot/vmlinuz-5.4.0-60-generic
Found initrd image: /boot/initrd.img-5.4.0-60-generic
Found linux image: /boot/vmlinuz-5.4.0-59-generic
Found initrd image: /boot/initrd.img-5.4.0-59-generic
Found linux image: /boot/vmlinuz-5.4.0-56-generic
Found initrd image: /boot/initrd.img-5.4.0-56-generic
Found linux image: /boot/vmlinuz-5.4.0-52-generic
Found initrd image: /boot/initrd.img-5.4.0-52-generic
Found Ubuntu 18.04.5 LTS (18.04) on /dev/sda5
Found Linux Lite 5.2 (20.04) on /dev/sda9
done
--- End quote ---

Navigation

[0] Message Index

[#] Next page

Go to full version