Hardware - Support > Network

wake onlan not wake

(1/1)

trinidad:
Sorry missed this. LL uses network manager. Use the deb wakeonlan package on your client and set for magic packet sending with nm-connection editor. Perhaps the link below will be of some help to you.

https://www.dbts-analytics.com/pxebtsshshtdn1.html

TC

faustf:
hi guys i try to active a wake onlan with last  version of S.O.  but not  work , i activate  a wakeonlan in bios  , and  after i have installed a wakeonlan software in linux  but  when run ethols  return this 

--- Code: ---ethtool enp1s0
Settings for enp1s0:
Supported ports: [ TP MII ]
Supported link modes:   10baseT/Half 10baseT/Full
                        100baseT/Half 100baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes:  10baseT/Half 10baseT/Full
                        100baseT/Half 100baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                     100baseT/Half 100baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Cannot get wake-on-lan settings: Operation not permitted
Current message level: 0x00000033 (51)
       drv probe ifdown ifup
Link detected: yes

--- End code ---


anyone can help me ?? thankz

Navigation

[0] Message Index