Linux Lite Forums

Hardware - Support => Network => Topic started by: ohjrson on October 13, 2020, 02:51:18 PM

Title: Need help with ASUSTek usb wifi
Post by: ohjrson on October 13, 2020, 02:51:18 PM
Hey, I have an AsusTek usb wifi that does not seem to be turning on. I think it needs a driver. But I am not sure where to get it from. I have looked in the forum and have had no luck. The actual cd that comes with it says there is a driver for Linux but I don't know how to install it. Any help would be great
thanks

here is some info:
inxi -N
Network:
  Device-1: Intel 82567V-2 Gigabit Network driver: e1000e
  Device-2: BUFFALO (formerly Mel ) Nintendo Wi-Fi type: USB
  driver: rt2500usb
  Device-3: ASUSTek 802.11ac NIC type: USB driver: usb-network

uname -a
Linux -Aspire-X3812 5.4.0-49-generic #53-Ubuntu SMP Fri Sep 18 09:54:57 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux

sudo lsusb
[sudo] password for xxxxxxxxxx
Bus 002 Device 003: ID 058f:6363 Alcor Micro Corp. Mass Storage Device
Bus 002 Device 009: ID 0b05:184c ASUSTek Computer, Inc. 802.11ac NIC
Bus 002 Device 008: ID 0411:008b BUFFALO INC. (formerly MelCo., Inc.) Nintendo Wi-Fi
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 003: ID 046d:c404 Logitech, Inc. TrackMan Wheel
Bus 005 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:092c Logitech, Inc. QuickCam Chat
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 xxxxxxxxxxx ~  sudo lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:19.0 Ethernet controller: Intel Corporation 82567V-2 Gigabit Network Connection
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
01:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller

rfkill list all
3: phy3: Wireless LAN
   Soft blocked: no
   Hard blocked: no

ping -c5 8.8.8.8
PING 8.8.8.8 (8.8.8. 8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=101 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=447 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=857 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=126 ms

--- 8.8.8.8 ping statistics ---
5 packets transmitted, 4 received, 20% packet loss, time 4001ms
rtt min/avg/max/mdev = 101.037/382.879/857.048/305.917 ms

Yes I do have 2 usb wifi adapters plugged in. Trying to get the ASUS to operate
update: Tried opening install.sh from CD but says it cannot open. Even tried as sudo still not opening.

Help
Title: Re: Need help with ASUSTek usb wifi
Post by: firenice03 on October 20, 2020, 08:36:26 PM
@ohjrson

Thought I replied....
Try the additional software / drivers see if a specific exists...
May need to supply the model# of the ASUS adapter for further assistance....
Title: Re: Need help with ASUSTek usb wifi
Post by: ohjrson on October 21, 2020, 02:08:22 PM
It's an Asus AC1200 USB AC53 Nano Model# USB-AC53 Nano
It came with a cd and when I looked at the cd contents it has a folder for Linux, but for PC linux... I think.

I did look up a driver for an AC1200 Seagate and tried that https://ubuntuforums.org/showthread.php?t=2394372&page=3 (https://ubuntuforums.org/showthread.php?t=2394372&page=3) And went through everything there but it stil does not work.

CAUTION: when I did these thing outlined in the link some unusual things happened. So I don't know if you should click on them.

I have a copy of the terminal output but it is rather large and I can't seem to load it up here.

Let me know what you think.

Thanks.
 
Title: Re: Need help with ASUSTek usb wifi
Post by: firenice03 on November 02, 2020, 07:54:11 PM
@ohjrson
I find very similar...

https://waynekhan.github.io/2020/05/30/asus-usb-ac53-nano-ubuntu.html (https://waynekhan.github.io/2020/05/30/asus-usb-ac53-nano-ubuntu.html)
or
https://ubuntuforums.org/showthread.php?t=2395729 (https://ubuntuforums.org/showthread.php?t=2395729)

Perhaps some help???

It maybe worth looking a new Wifi - I believe Panda have had success...

Also, it may worth looking at the Hardware databased - to see how many systems have the referenced hardware...
- for the AC1200, there was 1....
Title: Re: Need help with ASUSTek usb wifi
Post by: ohjrson on November 04, 2020, 11:39:47 AM
Thanks Firenice03
I have looked at the links and they look promising. I will try them out soon as I can and get back to you.
Thanks for the assist.


Cheers!!

UPDATE Nov 16 2020:
Hey Guys!! I did what the instructions said to do on the first link exactly as it was shown, basically copied and pasted and it is now working beautifully.

THANK YOU FIRENICE03!!!!