Linux Lite Forums
Software - Support => Installing Linux Lite => Topic started by: onnipoika on April 03, 2018, 03:36:39 PM
-
I installed LL, but after the install should have been finished I restarted my computer and everything seemd normal. But after I had once shutdown and removed the usb I got LL from my laptop opened to the BIOS menu and the ssd I installed LL to was not detected.
When I am in the live version of LL it detects my laptops ssd as a sd card reader and when I look into it all the LL files are there, but I can't boot to it.
please, help!
-
I don't know the command to check but maybe the SSD stayed partitionned in GPT/UEFI mode in some way.
It can be read in LL but not booted from.
Cheers!
-
When I am in the live version of LL it detects my laptops ssd as a sd card reader and when I look into it all the LL files are there, but I can't boot to it.
$ sudo lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 55.9G 0 disk
├─sda1 8:1 0 48.1G 0 part /home
└─sda2 8:2 0 7.8G 0 part /
sr0 11:0 1 1024M 0 rom
$ sudo parted -l
Model: ATA KINGSTON SV300S3 (scsi)
Disk /dev/sda: 60.0GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
2 1049kB 8390MB 8389MB primary ext4
1 8390MB 60.0GB 51.6GB primary ext4
Just giving you a example of what you should post next. While running in live session.
$ sudo fdisk -l
Disk /dev/sda: 55.9 GiB, 60022480896 bytes, 117231408 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x4322667d
Device Boot Start End Sectors Size Id Type
/dev/sda1 16386048 117229567 100843520 48.1G 83 Linux
/dev/sda2 2048 16386047 16384000 7.8G 83 Linux